Klein Tools 1019 Klein-Kurve® ...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$82.19
$33.51
Klein Tools 1019 Klein-Kurve® Wire Stripper / Crimper / Cutter Multi Tool

Klein Tools 1019 Klein-Kurve® Wire Stripper / Crimper / Cutter Multi Tool

(No reviews yet) Write a Review

Model: 1019
Selected Model is

In Stock (leaves warehouse same day if ordered before 3pm ET)

$82.19
$33.51
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like
Klein-Kurve® Wire Stripper / Crimper / Cutter Multi Tool

  • Warnings

    • NOT insulated. Plastic-dipped or slip-on plastic handles are NOT intended for protection against electrical shock.
    • Never use on or near live electrical circuits.
    • DO NOT use to cut steel wire.
    • Always wear approved eye protection.

  • Features

    • 4 Crimpers in One Tool
    • Crimps B connectors and Scotchlok® IDC connectors
    • Made in USA
    • Precision shear-type cutting blades for easier cutting
    • Loops and twists wire
    • Cleanly shears 6-32 and 8-32 screws
    • Scotchlok® is a registered trademark of 3M
    • Wire Stripper strips 10-26 AWG solid and 12-28 AWG stranded wire
    • Multi Tool crimps 10-22 AWG insulated and non-insulated terminals
    • Patent US D827,403
    • Reinforced head reduces flex
    • Double dipped Klein Kurve® comfort grips


1019 - spec sheet

Manufacturer Resources

Product Specs

Crimping Capacity:
10-22 AWG Insulated and Non-insulated Terminals; B-Connectors; Scotchlok® IDC Connectors
Handle Color:
Gray/Red
Handle Finish:
Double Dipped
Item Depth:
7.6900 in
Item Height:
0.3800 in
Item Weight:
0.3400 lbs
Item Width:
2.4900 in
Overall Length:
7.75" (19.7 cm)
Screw Shearing:
6-32, 8-32
Strips And Cuts:
10-26 AWG Solid, 12-28 AWG Stranded
Department:
Electrical
Product Group:
Hand Tools
Product Subgroup:
Pliers & Cutters
Product Type:
Multi Tool
Product Details:
Multi Tool
Product Material:
Steel
Product Weight:
5.4 oz (154 g)

Klein Tools 1019 – Frequently Asked Questions

1) What wire sizes does the Klein Tools 1019 multi tool strip?
The 1019 strips 10-26 AWG solid and 12-28 AWG stranded. That covers typical building wire down through low-voltage and control conductors, so one tool handles both 12 AWG branch circuit runs and 22 AWG thermostat or alarm wire.
2) Will the Klein 1019 crimp insulated and non-insulated terminals, or do I need a separate crimper?
Both, on the same tool. The 1019 crimps 10-22 AWG insulated and non-insulated terminals, plus B-connectors and Scotchlok IDC connectors, four crimping stations in one head. If your terminals fall outside 10-22 AWG, you need a different crimper.
3) Can I use the Klein 1019 stripper on live circuits?
No. The 1019 is not insulated. The double-dipped Klein-Kurve grips are for comfort, not shock protection, and the tool should never be used on or near energized conductors. De-energize and verify dead first, and wear approved eye protection when cutting.
4) Does the Klein 1019 shear 6-32 and 8-32 screws?
Yes, it cleanly shears both 6-32 and 8-32 machine screws, which are the two sizes used on device mounting and cover plates. That saves pulling out a hacksaw when a long screw bottoms out in a shallow box.
5) Can the 1019 cut steel wire or cable staples?
No. Klein specifically warns against cutting steel wire with the 1019. Its shear-type blades are for copper conductors; steel will chip or dull them. Use a dedicated cable or bolt cutter for hardened material.
6) Does the Klein 1019 make a loop for terminating on screw terminals?
It does. The 1019 has a wire looping and twisting feature, so you can strip a conductor and form the hook for a receptacle or switch screw terminal without changing tools. Useful when you're trimming out a run of devices.
7) How big and heavy is the Klein 1019 for pouch carry?
Overall length is 7.75 inches (19.7 cm) and it weighs 5.4 oz (154 g), so it drops into a standard pouch slot alongside linesman's pliers without adding noticeable weight.
8) Is the Klein Tools 1019 made in the USA and what is it built from?
The 1019 is made in the USA with steel construction and a reinforced head that reduces flex under crimping load. Handles are gray and red double-dipped Klein-Kurve grips.
9) What part number do I order for the Klein-Kurve wire stripper crimper multi tool?
Order Klein Tools model 1019. That's the single catalog number for the Klein-Kurve wire stripper / crimper / cutter multi tool, and it's also the manufacturer part number, so there are no finish or size options to specify.
How fast can I get the Klein Tools 1019 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Klein Tools 1019 come with a warranty?
Absolutely. The Klein Tools 1019 is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Klein Tools 1019?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Klein Tools 1019 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!