Klein Tools Slotted Screw Hold...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$14.26
Klein Tools Slotted Screw Holding Screwdriver, 5/16" Tip

Klein Tools Slotted Screw Holding Screwdriver, 5/16" Tip

(No reviews yet) Write a Review

Model: K48

In Stock (leaves warehouse same day if ordered before 3pm ET)

$14.26
Adding to cart… The item has been added
Free Shipping on orders over $199.99
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like
5/16-Inch Slotted Holding Screwdriver, 8-Inch

  • Features

    • Not designed for torquing or tightening
    • Screwdriver split-blade screw-holding driver wedges into screw slot
    • Made in USA for maximum strength and durability
    • Positive gripping action holds, starts, and drives slotted screws in awkward, hard-to-reach places

  • Warnings

    • Do NOT use to pry or chisel.
    • Always wear approved eye protection.
    • NOT insulated. Will NOT protect against electrical shock.


K48 - spec sheet

Manufacturer Resources

Product Specs

Product Group:
Hand Tools
Handle Material:
Plastic
Item Width:
1.0000 in
Handle Color:
Red
Shank Type:
Round
Magnetic:
No
Product Subgroup:
Screwdrivers & Drivers
Tip Size:
5/16" (7.9 mm)
Department:
Electrical
Product Type:
Hardware
Product Material:
Steel
Tip Type:
Screw Holding
Item Height:
1.0000 in
Insulated:
No

Klein Tools K48 – Frequently Asked Questions

1) How does a Klein screw-holding screwdriver actually grip the screw?
The blade is split. Turning the collar spreads the two halves so they wedge into the screw slot and hold the screw on the tip, which lets you start and drive slotted screws one-handed in tight or overhead spots. It is a holding and starting tool, not a torquing tool, so once the screw is started, finish tightening with a standard driver.
2) Is the Klein K44 screw-holding screwdriver safe to use on live electrical work?
No. This driver is not insulated and will not protect against electrical shock, even though it is catalogued for electrical work and has a plastic handle. De-energize the circuit before using it, or reach for a rated insulated driver if you must work live.
3) What screw slot width does the 5/16-inch Klein holding screwdriver suit?
The tip measures 5/16 inch (7.9 mm) across, so it is sized for larger slotted screws such as heavy device screws, terminal screws on bigger gear, and panel hardware. On a small slot the split blade cannot seat and will not grip, so match the tip to the slot width.
4) Should I get the 4-inch or the 8-inch shank version?
Two shank lengths are offered: the K44 at 4 inches and the K48 at 8 inches. The short K44 works in cabinets, panels and boxes where there is no room to swing a long driver. The 8-inch K48 gets you past deep enclosures and recessed screws where the handle has to clear the surrounding gear. Tip size is the same 5/16 inch slotted on both.
5) Is this screwdriver magnetic, and can I use it instead of a magnetic tip driver?
It is not magnetized. The hold comes from the mechanical split blade wedging in the slot, which is why it works on brass, stainless and aluminum screws that a magnetic driver will not pick up at all. If your screws are steel and easy to reach, a magnetic driver is simpler; for non-ferrous screws or awkward blind holes, the holding blade is the one that works.
6) Can I use a Klein screw-holding driver to pry open a cover or scrape a gasket?
No. Klein specifically warns against prying or chiseling with it. The blade is split down its length, so side loading can spread or snap it, and a broken blade in the tool that is holding a screw over your head is the reason approved eye protection is called for in the instructions. Use a pry bar or scraper for that work.
7) What is the blade made of and where is it made?
Steel blade with a red plastic handle, and Klein states it is made in the USA for strength and durability. The shank is round rather than square, so there is no flat for a wrench, another reason this tool is for starting and holding screws rather than cranking them down tight.
How fast can I get the Klein Tools K48 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Klein Tools K48 come with a warranty?
Absolutely. The Klein Tools K48 is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Klein Tools K48?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Klein Tools K48 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!