Kwikset 156SYL-SQT Sydney Keyed Entry Lever SmartKey with Square Rose, 6AL Latch and RCS Strike

The Sydney lever is reversible, so one lockset covers both left and right hand doors. You don't specify handing when ordering, and an installer can flip the lever in the field if the door swing changes.

It's classified as residential hardware and carries an ANSI/BHMA Grade 2 certification. That suits apartments, condos, and light-traffic residential openings. For a commercial corridor or a school, step up to a Grade 1 cylindrical lockset such as the Falcon K101 or the Dexter C1000 Series, both of which are Grade 1.

SmartKey is Kwikset's owner-rekeyable cylinder. Using the SmartKey tool and a working key, you can rekey the lock to a new key yourself in seconds, without pulling the cylinder or the lockset off the door. For a property manager that's the practical draw: a tenant turns over, you rekey the unit at the door instead of calling a locksmith. The Sydney is a keyed lock, so the outside lever locks and the key retracts it.

The 6AL latch and RCS strike ship with it. 6AL is Kwikset's adjustable latch, so it covers both common residential backsets, and RCS is the round corner strike. Nothing else is needed to prep and hang it beyond a standard bored door.

The Sydney 156SYL-SQT uses Kwikset SmartKey, which is rekeyable at the door but is its own keyway. If the property is standardized on Schlage C, the Cal-Royal AG00 is a Grade 2 entrance lever with a 6-pin Schlage C keyway keyed different and a 2-3/8 inch backset for doors 1-3/8 inch to 1-3/4 inch, and the Cal-Royal AG03 classroom lever in the AG series uses the same 6-pin Schlage C keyway with a 2-3/4 inch backset.

The Kwikset Sydney 156SYL-SQT is a residential ANSI/BHMA Grade 2 keyed entry lever. For a corridor or tenant door where you want a commercial-rated keyed lever, the Hager 2525 is a Grade 2 commercial cylindrical entry lock with a lever handle that fits doors 1-3/8 inch to 2 inch thick. The Falcon B511CP6D is another Grade 2 cylindrical lever in an entry/office function at medium duty. Both are keyed entry-style functions like the Sydney, but they are built to commercial cylindrical lock lines rather than a residential rose trim.

The Sydney 156SYL-SQT is a keyed entry function, so it is not the right part for a non-locking closet or hall door. For passage function in a lever, the Falcon B101 is a Grade 2 non-handed cylindrical passage lever, the Hager 2510 is a Grade 2 passage cylindrical lever for doors 1-3/8 inch to 2 inch thick, and the Bravura Tampa is a Grade 2 passage leverset with square trim if you want to carry the square rose look across the openings.

The Sydney 156SYL-SQT is a keyed entry lever, where the outside lever can be left unlocked. For a door that must stay locked on the outside with free egress, use a storeroom function instead: the Cal-Royal AG05 is a Grade 2 storeroom lever lockset with a deadlocking latchbolt for doors 1-3/8 inch to 1-3/4 inch thick, and the Hager 2580 is a Grade 2 storeroom cylindrical lock with the Withnell lever for doors 1-3/8 inch to 2 inch.

Two: Venetian Bronze and Black. If you're matching existing hardware across a building, those are the only two finishes in this square rose configuration, so pick the one that matches your deadbolts and hinges before you standardize.

Only the shape of the trim plate behind the lever. The 156SYL-SQT uses the square rose; the same Sydney lever is also offered with a round rose. The lever itself, the arched Sydney shape, is identical either way. Square rose reads more contemporary and lines up with square hinges and rectangular plates; round is the safer match on older openings.

The 156SYL-SQT is the keyed entry function only, which is what you want on an exterior or unit entry door. Kwikset builds the Sydney lever in other functions for interior use. If you're specifying across a whole job and want one family for everything, Bravura's Tampa leverset with square trim is a Grade 2 passage option with square trim, and the Bravura Atlanta and Orlando are the round-trim passage versions.

It's the common choice there. Grade 2 residential, keyed entry, reversible so one SKU covers every door in the building regardless of swing, and the SmartKey cylinder lets maintenance rekey between tenants without a locksmith call. Where it stops being the right pick is a shared corridor or amenity door under heavy public traffic, where a Grade 1 commercial lockset belongs.

No. The Sydney 156SYL-SQT is a keyed entry lever with a cylinder on the outside. A privacy lever has a thumbturn and no key. If a bed or bath door is what you are hardware-ing, the Hager 2540 and the Baldwin Estate 5103 privacy lever with the 5048 rose are privacy-function levers. They will not accept a key and cannot be keyed alike with a keyed entry set.

The Sydney 156SYL-SQT is certified ANSI/BHMA Grade 2. Where an opening calls for Grade 1, the Dexter C1000 series covers keyed Grade 1 cylindrical levers in classroom and classroom security functions for doors 1-3/8 inch to 1-3/4 inch thick, and in asylum function for 1-3/8 inch to 2 inch doors. Those are institutional functions rather than a residential keyed entry, so confirm the function code against the opening before ordering.

The Sydney 156SYL-SQT uses a SmartKey cylinder. If you would rather issue codes than keys on the same opening, the Delaney LP250 is a Grade 2 electronic keypad leverlock, and Lockey offers mechanical pushbutton lever sets: the 2835 single-combination and 2835DC double-combination for doors 1-3/16 inch to 2 inch, and the 1150 heavy duty keypad lever set for 1-1/8 inch to 2 inch doors. The Lockey units listed are passage function, so they do not deadlock the way a keyed entry set does.

No. The Sydney 156SYL-SQT lever is reversible and fits both left and right hand doors, so one part number covers either swing. That is not universal across levers: the Baldwin Estate 5103 half dummy is sold as separate left hand and right hand parts, so handing has to be called out at order time on that one.

No. A dummy lever is a pull only, with no latch and no bolt, so it will not hold a door closed. The Sydney 156SYL-SQT is a working keyed entry lever with a latch and strike. If you need a pull on an inactive leaf, dummy options include the BEST 7KC single dummy trim in Grade 2 medium duty, the BEST 9K 1DT single dummy trim in Grade 1 heavy duty, and the Callan Bentley Grade 2 dummy lever.

The Sydney 156SYL-SQT is a residential Grade 2 keyed entry lever. When the opening carries a fire label, specify a lock listed for it: the Falcon K101 is a Grade 1 heavy duty passage cylindrical lock with a fire rating and a 1-3/8 inch to 2-1/4 inch door thickness range, and the Corbin Russwin CL3110 is a Grade 1 vandal resistant passage/closet cylindrical lever with a fire rating for 1-3/4 inch to 2 inch doors. Both of those are passage function, so match the function to the opening separately.

It's a lever rather than a knob, which is the part that matters for anyone who can't grip and twist, and the arched Sydney shape is drawn for hand comfort. Treat that as ergonomics, not a compliance claim. If the opening has to meet a written ADA requirement, the Lockey 2835 is a keyless pushbutton lever lock with ADA compliance stated.

The Sydney 156SYL-SQT is a contemporary-styled residential keyed entry lever offered in Venetian Bronze and Black. On the decorative side, Deltana offers entry levers in several trims: the 6201 Manchester, 6411 Morant and 6431 Linstead all fit doors 1-3/8 inch to 2 inch thick, and the 5851 Claremont is also an entry function lever. These are styled sets rather than commercial cylindrical lines.