Kwikset 815SCE-HFL-SQT San Clemente Exterior Handleset, Halifax Lever With Square Rose Interior (No Deadbolt), 6-Way Adjustable Latch, Round Corner Strike

It does not lock. The San Clemente exterior grip with Halifax lever is a non-functioning handleset, meaning the thumbpiece just retracts the latch and there is no cylinder and no deadbolt. Buyers commonly pair it with a separate deadbolt above it so the deadbolt does all the securing. If you need the handle itself to lock, look at an entry-function set instead, like the Sure-Loc Madison keyed entry handleset or the Pamex FS7P31 Lexington single cylinder handleset.

The 815SCE ships with a 6-way adjustable latch and a round corner faceplate, so it adapts to common residential bores and backsets without re-drilling in most cases. The one thing to check is your existing strike mortise: this set comes with a round corner strike, so if your jamb is cut for a square corner plate the round strike will leave a gap and the mortise needs a small filler or recut.

The Kwikset 815SCE San Clemente pairs an exterior thumbpiece grip with a Halifax lever on a square rose inside and no deadbolt. The nearest match by function is the Schlage Residential JE285 Barcelona handleset with Seville lever, a J Series non-keyed entry unit rated Grade 2 for 1-3/8 inch to 1-3/4 inch doors. Weslock's 2815 Hillcrest dummy handleset with New Heaven lever also uses a lever inside on 1-3/8 inch to 2 inch doors, but it is a dummy - it has no operating latch at all, so it suits an inactive leaf rather than a door that has to latch.

No. The 815SCE San Clemente has a working latch bolt operated by the outside thumbpiece and the inside Halifax lever - it just omits the deadbolt. A dummy handleset is surface-mounted trim with no latch: the Emtek 3002 Memphis, 3004 Hamilton, 3005 Melrose and 3006 Manhattan brass mortise handlesets are all dummy function, as is the Weslock 6695 Belmont with Impresa knob. Use a dummy on a fixed or inactive leaf; use the San Clemente where the door still has to latch.

The 815SCE San Clemente is a tubular residential handleset with a 6-way adjustable latch and round corner strike, not mortise trim. For a mortise prep, the Baldwin Estates 6542 Tremont entry mortise trim is made for 1-3/4 inch doors in single cylinder (6542ENTR) and double cylinder (6542DBLC) versions. The Sure-Loc Alta AT507 is another tubular handleset with adjustable backset if you are able to re-prep the door.

The listed included component is the outside grip handle only, along with the latch and round corner strike described for the set. The exterior piece is the San Clemente grip; the interior side is the Halifax lever on a square rose. Plan your order around that: if the job needs a deadbolt, trim rings, or a second set of screws for an unusual door, those are separate line items.

It is a residential-duty product. The San Clemente Signature Series handleset is classified for residential use, so it suits single-family doors and unit entries in low-traffic multi-family. For a commercial opening or a heavy-traffic entrance, a Grade 2 residential set such as the Master Lock HDLB Series single cylinder deadbolt handleset or the Schlage Residential F60 Addison is the better starting point.

The San Clemente 815SCE is already the no-deadbolt, thumbpiece-only version, so it functions much like a dummy on the secure side of the job. If you want a true dummy handleset in solid brass styling, the Emtek 3002 Memphis, 3004 Hamilton, 3005 Melrose and 3006 Manhattan are all dummy-function mortise entrance handlesets, and the Weslock 2815 Hillcrest with New Heaven lever is a dummy set with a lever interior like this one.

For doors on the thicker end, look at the Weslock 2810 Hillcrest single cylinder handleset or the Weslock 6695 Belmont dummy, both listed for 1-3/8 inch to 2 inch doors, or the Deltana 810871 Montego at 1-3/8 inch to 2 inch. Heavier still, the Weslock 1411 Traditionale Colonial covers 1-3/4 inch to 2-1/4 inch. Standard residential doors run 1-3/8 or 1-3/4 inch, which is what most handlesets are built around.

The Kwikset 815SCE San Clemente is a residential Signature Series handleset. Among the comparable handlesets, the ones that publish an ANSI grade are Grade 2: the Schlage Residential F60 Addison keyed entry with Accent lever and the JE285 Barcelona non-keyed with Seville lever, both fitting 1-3/8 inch to 1-3/4 inch doors, and the Master Lock HDLB Series HDLBA0615/4D single cylinder deadbolt handleset. Schlage also offers the JI18/19 interconnected passage lock with keyed deadbolt and Torino lever, Grade 2, if you want the deadbolt and latch to retract together.

The 815SCE San Clemente is a mechanical residential handleset with no deadbolt. For electronic entry with a matching grip, the Yale Real Living Assure line pairs a Ridgefield handleset with a touchscreen deadbolt: BYRD226NRRX is standalone, BYRD226CBARX adds Wi-Fi and Bluetooth, and BYRD256 CBARX is a key-free Wi-Fi version with a Ridgefield passage handleset and trim. The BYRD226 and BYRD256 CBARX units fit 1-3/4 inch to 2-1/4 inch doors.

For thicker doors, the comparable handlesets that publish a range going past 1-3/4 inch are the Weslock 1411 Traditionale Colonial with Eleganti knob at 1-3/4 inch to 2-1/4 inch, the Deltana 810871 Montego at 1-3/8 inch to 2 inch, the Weslock 2810 Hillcrest single cylinder with Hudson knob at 1-3/8 inch to 2 inch, and the Yale Assure BYRD226NRRX touchscreen deadbolt with Ridgefield handleset at 1-3/4 inch to 2-1/4 inch. Confirm your door thickness against the Kwikset San Clemente installation instructions before ordering it for a 2 inch door.

The Kwikset 815SCE San Clemente is built around the Halifax lever on a square rose. If your standard is an interior knob, the Baldwin Wesley handleset is offered with the Alcott knob (180WYHXATK) and the Carnaby knob (180WYHXCYK), both entrance function; Weslock offers the 2810 Hillcrest single cylinder with Hudson knob for 1-3/8 inch to 2 inch doors and the 1411 Traditionale Colonial with Eleganti knob for 1-3/4 inch to 2-1/4 inch doors.

The 815SCE San Clemente ships with a 6-way adjustable latch and a round corner strike, so it covers common backsets without re-boring. Sure-Loc handlesets with adjustable backset include the Aspen AN507 and Madison MA507 keyed entry models, the Alta AT507 tubular handleset, and the Coral CR507. Those are the comparable handlesets that call out backset adjustment directly.

Black is the finish offered on this San Clemente grip with Halifax lever. If you are matching other openings in a building, that is the one to standardize on for this model, and the square rose on the interior lever gives you a clean square-edge look that pairs with square-rose deadbolt trim rather than round.

It goes on with a screwdriver, no special tooling, and the 6-way adjustable latch means you are not re-boring for backset. For a property manager swapping hardware across several units, that is the practical appeal: latch adjusts, strike is a round corner plate, and the exterior grip mounts through the standard door prep.

Yes, the San Clemente 815SCE carries Microban antimicrobial product protection built into the hardware finish, which the manufacturer states keeps door hardware 99.9% cleaner. That is a point worth noting for healthcare, hospitality, and senior-housing procurement where touch surfaces get specified.

The Kwikset 815SCE San Clemente is part of the Signature Series San Clemente collection. If solid brass construction is the requirement, Deltana offers the 803871B Hanover, 815871 St. Ann and 825871 Kingston handlesets, all solid brass in entry function, plus the 810871 Montego for 1-3/8 inch to 2 inch doors. The Pamex FS7P31 Lexington single cylinder handleset in satin nickel is another entry-function option covering 1-3/8 inch to 1-3/4 inch doors.