Kwikset KWI-814SCE San Clemente Handle Only; No Deadbolt with RCAL Latch and RCS Strike Satin

The 814SCE San Clemente is a non-functioning handleset, exterior pack only. There is no deadbolt and no working latch mechanism in the grip, so it does not secure the door. Buyers use it on an exterior face where the door is already secured some other way, or where a second entry door only needs to look like the keyed one. If you need the door to actually lock, this is the wrong part.

Yes. The latch supplied with the San Clemente handleset has an adjustable backset covering 2-3/8 inch and 2-3/4 inch, which are the two backsets used on standard residential door prep, so it drops into an existing bore either way. No re-drilling of the cross bore is needed. Installation is screwdriver work.

No. What ships is the exterior pack only, meaning the outside grip with the latch and the round deadbolt strike. There is no interior knob, lever, thumbturn, or interior trim in the box, so if you are dressing both faces of the door you will need interior hardware ordered separately.

The San Clemente 814SCE is a non-functioning handleset, so it will not secure an opening. For a keyed entry door, the Schlage Residential F60 Addison Single Cylinder Keyed Entry Handleset with Accent Lever is a Grade 2 entrance handleset in the F Series for doors 1-3/8 inch to 1-3/4 inch thick, and the Master Lock HDLBA0615/4D is a Grade 2 single cylinder deadbolt handleset in the HDLB Series with an entrance function. The Pamex FS7P31 Lexington Single Cylinder Handleset in satin nickel is an entry-function handleset for the same 1-3/8 inch to 1-3/4 inch door range.

The 814SCE San Clemente is an exterior handle only with no deadbolt, a dummy function trim. The Weslock 2815 Hillcrest Dummy Handleset with New Heaven Lever is a dummy handleset built for doors 1-3/8 inch to 2 inch thick, and the Weslock 6695 Belmont Dummy Handleset with Impresa Knob is a dummy handleset in the Elegance Series for the same 1-3/8 inch to 2 inch door range. Both give you the same non-latching handleset look on the door face; the difference is that each carries an interior trim piece, a lever on the 2815 and a knob on the 6695, while the San Clemente is the exterior grip on its own.

Both are dummy handlesets, so neither latches or locks the door. The Kwikset 814SCE San Clemente ships with a round corner faceplate latch and a round deadbolt strike and installs with a screwdriver against standard bored door prep. The Emtek 3002 Memphis, 3004 Hamilton, 3005 Melrose, and 3006 Manhattan are brass mortise entrance handlesets in dummy function, so they sit on a mortise pocket rather than a bored preparation. If the door is already bored for a standard handleset, the San Clemente drops in; if the door carries a mortise pocket, the Emtek trims are the ones cut for it.

Anything with an entrance or entry function is a different part even when the grip looks alike. The Baldwin Wesley Handleset with Alcott Knob and the Baldwin Wesley Handleset with Carnaby Knob are both entrance function, the Deltana 803871B Hanover, 815871 St. Ann, and 825871 Kingston solid brass handlesets are all entry function, and the Schlage JE285 Barcelona with Seville lever is a Grade 2 entrance-function handleset in the J Series. The San Clemente 814SCE is a non-functioning exterior handle with no deadbolt, so it will not stand in for any of those on a door that has to operate.

The latch has a round corner faceplate, and a round deadbolt strike is included. If your existing door edge is mortised for a square corner faceplate, the round corner latch will sit in a square pocket with gaps at the corners, so plan on either a square-corner latch or a little chisel work on the mortise.

Several. The Weslock 2815 Hillcrest dummy handleset with New Heaven lever and the Weslock 6695 Belmont dummy with Impresa knob are both dummy function and cover 1-3/8 to 2 inch doors. Emtek's brass mortise dummy handlesets, the 3002 Memphis, 3004 Hamilton, 3005 Melrose, and 3006 Manhattan, are the solid brass option if you want a heavier grip and a different look on the same non-functioning application.

No handing to specify. The 814SCE is a reversible lower door handle, and because it is non-functioning there is no latch operation to swap. Order the finish you want and it works on a left or right hand door.

The 814SCE San Clemente latch carries an adjustable backset of 2-3/8 inch to 2-3/4 inch to suit standard door preparations. If you are matching handlesets on a thicker slab, the Deltana 810871 Montego Handleset covers doors 1-3/8 inch to 2 inch, and the Weslock 2810 Hillcrest Single Cylinder Handleset with Hudson Knob in the Premiere Essentials series covers the same 1-3/8 inch to 2 inch range. For a heavier door, the Weslock 1411 Traditionale Colonial Handleset with Eleganti Knob is a single cylinder handleset for 1-3/4 inch to 2-1/4 inch doors.

The 814SCE San Clemente is a mechanical exterior handle with no deadbolt, so there is no keyed or electronic function to carry over. If you want a keypad on the same opening, the Yale Real Living BYRD226CBARX Assure Lock Wi-Fi Bluetooth touchscreen deadbolt with Ridgefield handleset and the BYRD226NRRX standalone touchscreen version both fit doors 1-3/4 inch to 2-1/4 inch thick, and the key-free BYRD256 CBARX with Ridgefield passage handleset covers the same range. Note the door thickness those Yale sets require before swapping, since the San Clemente latch is set up for standard bored prep with a 2-3/8 inch to 2-3/4 inch adjustable backset.

The San Clemente 814SCE is an exterior handle only, no deadbolt, with an adjustable 2-3/8 inch to 2-3/4 inch backset latch for standard bored door prep. The Baldwin Estates 6542 Tremont entry mortise trim is made for a 1-3/4 inch door and comes as single cylinder or double cylinder, both entrance function. Choose by what the door is machined for: a bored door takes the San Clemente, a door with a mortise lock body takes the Tremont trim, and the double cylinder 6542 is the one to specify when the opening needs a key on both sides.

The 814SCE San Clemente is the exterior grip with no deadbolt, so it does not cover a keyed opening. The Schlage Residential JI18/19 Interconnected Passage Lock with keyed deadbolt and Torino lever in satin stainless steel is a Grade 2 passage-function interconnected set in the JI Series for doors 1-3/8 inch to 1-3/4 inch thick, which gives you a lever plus a keyed deadbolt on one opening. For a knob rather than a lever, the Weslock 2810 Hillcrest single cylinder handleset with Hudson knob works on doors 1-3/8 inch to 2 inch thick.

The San Clemente handleset is a residential product from Kwikset's Signature Series. Property managers putting it on apartment or single-family entries are on the right product; for a commercial opening under a hardware schedule, look at a Grade 2 handleset such as the Schlage Residential F Series or the Master Lock HDLB Series instead.

The San Clemente 814SCE comes in Venetian Bronze, Satin Nickel, Polished Chrome, and Matte Black, which covers the common residential finish families for standardizing across units. If a particular opening needs a keyed handleset in satin nickel to sit alongside them, the Pamex FS7P31 Lexington single cylinder handleset is supplied in a satin nickel finish and is an entry function set for doors 1-3/8 inch to 1-3/4 inch thick.