LCN 1260-Plate Door Closer Mou...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$82.00
$74.50
LCN 1250 Mounting Plate

LCN 1260-Plate Door Closer Mounting Plate for Narrow Frame Applications

(No reviews yet) Write a Review

Model: 1260-18PA-693
Selected Finish is

In Stock (leaves warehouse same day if ordered before 3pm ET)

$82.00
$74.50
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like

LCN 1260 Door Closer Mounting Plate for Narrow Frame Applications

Professional Door Closer Installation Accessory

The LCN 1260 Mounting Plate is an essential installation accessory designed to enable proper door closer mounting in applications with limited frame dimensions. This professional-grade mounting plate accommodates both hinge side and top jamb installations where standard mounting requirements cannot be met due to narrow top rails or head frames measuring less than 2 3/8" (60mm) for hinge side mounting or less than 1 3/4" (44mm) for top jamb mounting. Available in two configurations (1260-18 and 1260-18PA), this mounting solution ensures secure door closer installation while maintaining optimal performance in challenging architectural conditions.

Professional Features & Benefits

  • Narrow Frame Compatibility: Enables installation where top rail is less than 2 3/8" (60mm) for hinge side mounting or head frame is less than 1 3/4" (44mm) for top jamb mounting.
  • Parallel Arm Configuration: 1260-18PA variant accommodates parallel arm mounting where top rail is less than 4 1/2" (114mm) measured from the stop.
  • Minimum Clearance Requirements: Requires only 1 1/2" (38mm) minimum top rail or 1 1/4" (32mm) head frame for standard configuration, with 1 3/4" (44mm) minimum for parallel arm applications.
  • Flush Ceiling Applications: Specifically designed to address flush ceiling conditions where standard mounting is not feasible.
  • Professional Installation Solution: Eliminates installation challenges in retrofit applications and buildings with non-standard frame dimensions.
  • Dual Configuration Options: Available as 1260-18 for standard applications and 1260-18PA for parallel arm mounting requirements.

Technical Specifications

  • Department: Door Hardware

Professional Applications

  • Commercial Office Buildings
  • Educational Facilities
  • Healthcare Institutions
  • Retail Establishments
  • Industrial and Warehouse Facilities
  • Multi-Tenant Residential Properties
  • Government and Municipal Buildings

Why Choose LCN Quality?

LCN mounting plates deliver professional-grade reliability with precision-engineered construction designed for demanding commercial door closer installations. These mounting solutions enable proper door closer function in challenging architectural conditions where standard mounting methods are not feasible. Engineered for demanding commercial applications where dependable performance and proper installation are essential.

Manufacturer Resources

LCN Full Line Catalog

Product Specs

Department:
Door Hardware

LCN 1260-18PA-693 – Frequently Asked Questions

1) What is the difference between the standard plate and the PA version?
The PA version is the parallel arm plate. Use it when the closer is mounted parallel arm and the top rail measures less than 4-1/2 inches (114mm) from the stop. It needs a minimum of 1-3/4 inches (44mm) of top rail. The non-PA plate covers hinge side and top jamb mounting instead, and drops the requirement to 1-1/2 inches (38mm) of top rail or 1-1/4 inches (32mm) of head frame. Pick the plate that matches the arm configuration you are installing, not the other way round.
2) Do I still need this plate if my top rail is wide enough?
No. If the top rail is 2-3/8 inches (60mm) or more for hinge side mounting, or the head frame is 1-3/4 inches (44mm) or more for top jamb, the closer mounts without a plate. The plate only earns its place on narrow rails and heads, on flush ceiling conditions, and on parallel arm openings where the rail is under 4-1/2 inches (114mm) from the stop. Buying it for a standard opening just adds a part and a projection you do not need.
3) Will this LCN plate work under a flush ceiling where there is no room above the frame?
Flush ceiling conditions are one of the situations this plate is built for. Where the ceiling runs tight to the head and a closer body cannot be landed on the frame the normal way, the plate gives you a mounting surface, provided you still have the 1-1/4 inch (32mm) head frame or 1-1/2 inch (38mm) top rail minimum to fasten to.
4) What finishes does the LCN closer mounting plate come in, and can I match it to the closers already in my building?
Six finishes: 689 aluminum, 690 statuary bronze, 691 light bronze, 693 gloss black, 695 dark bronze and 696 brass. Those are the standard LCN closer finish codes, so if you note the code on the closers already hung in the building you can order the plate to match it. All six are offered on both the standard and the parallel arm plate.
5) I am retrofitting closers into an older building with odd frame sizes. Is a mounting plate the right approach?
For retrofits and non-standard frame dimensions, yes, this is the usual fix. Rather than cutting or rebuilding the frame, the plate carries the closer on rails and heads that fall short of the normal mounting dimensions. Measure first: hinge side rail under 2-3/8 inches (60mm), head frame under 1-3/4 inches (44mm), or parallel arm rail under 4-1/2 inches (114mm) from the stop all point to a plate. It sees use across offices, schools, healthcare, retail, industrial buildings, multi-tenant residential and government facilities.
6) What do I need to specify when ordering an LCN closer mounting plate?
Two things decide the order: the mounting configuration and the finish. Choose the parallel arm plate if the closer is going on parallel arm, or the standard plate for hinge side and top jamb work, then pick one of the six finishes (689, 690, 691, 693, 695, 696). Get the door closer itself separately, the plate is a mounting accessory and does not include a closer or arm.
How fast can I get the LCN 1260-18PA-693 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the LCN 1260-18PA-693 come with a warranty?
Absolutely. The LCN 1260-18PA-693 is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the LCN 1260-18PA-693?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the LCN 1260-18PA-693 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!