You may also like
LCN 1461-POWDER Surface-Mounted Medium Duty Door Closer with Powder Coat Finish
Model: LCN-1461-POWDER
LCN 1461 Surface-Mounted Medium Duty Door Closer with Powder Coat Finish
The LCN 1461 is a surface-mounted, medium duty commercial door closer with powder coat finish. It carries an adjustable spring...
LCN
Starting at
$494.00
$254.21
LCN 4040XP-PLATED Heavy-Duty Surface-Mounted Door Closer with Plated Finish - Grade 1 Commercial
Model: LCN-4040XP-PLATED
LCN 4040XP Heavy-Duty Surface-Mounted Door Closer with Plated Finish - Grade 1 CommercialProfessional Grade 1 Door Closer for High-Traffic ApplicationsThe LCN 4040XP Heavy-Duty Surface-Mounted Door...
LCN
Starting at
$1,412.00
$804.84
LCN 4041 Heavy Duty Surface-Mounted Door Closer with Delayed Action Cylinder
The LCN 4041 is a surface-mounted, heavy-duty door closer built on the 4040XP platform and fitted with the 3071 DEL Delayed Action Cylinder (CYLDEL). The cast iron body with 1-1/2" diameter piston and double heat-treated steel pinion is rated ANSI/BHMA A156.4 Grade 1 and ADA compliant. The adjustable delay allows the door to remain open for up to approximately one minute before closing, making it the standard specification for high-traffic corridors, accessible entrances, and institutional applications where extended open time is required.
Key Features
- Delayed Action Cylinder (CYLDEL): Non-handed, field-adjustable delay up to approximately one minute. Cylinder is a separate replaceable component.
- Cast Iron Construction: 1-1/2" diameter piston, double heat-treated steel pinion, full-complement low-friction bearing system.
- Adjustable Spring Size 1-6: Non-handed, non-sized closer accommodates a wide range of door widths and weights without changing the unit.
- All-Weather Fluid: Liquid X all-weather fluid maintains consistent sweep and latch speed across temperature extremes.
- Mounting Versatility: Installs hinge-side pull (standard), top jamb push, or parallel arm push. Mounting hole pattern 2-1/4" x 5".
- Cover Options: Non-handed plastic cover (4040XP-72) standard; handed metal cover (4040XP-72MC) required for powder coat and plated finishes.
- Installation Aids: LCN peel-n-stick templates and Green Dial spring force indicator included.
- Certifications: ANSI/BHMA A156.4 Grade 1, ADA compliant, BAA qualified, cUL and UL listed for self-closing fire-rated doors.
- Warranty: 30-year limited warranty.
Arm Types Available
Available arm configurations: REGARM (Regular), LONG (Long), RWPA (Regular with Parallel Arm Bracket), HWPA (Hold Open with Parallel Arm Bracket), H (Hold Open), CUSH (Cush-n-Stop), HCUSH (Hold Open Cush-n-Stop), SCUSH (Spring Cush-n-Stop), SHCUSH (Spring Hold Open Cush-n-Stop), EDA (Extra Duty), EDAW62G (Extra Duty with 62G Thick Hub Shoe), HEDA-RH/LH (Hold Open Extra Duty, handed), and HEDA62G-RH/LH (Hold Open Extra Duty with 62G Shoe, handed). Select arm type and finish at the variant level.
Finishes
Available in six powder coat finishes: 689 Aluminum, 690 Statuary Bronze, 691 Light Bronze, 693 Gloss Black, 695 Dark Bronze, and 696 Brass.
Typical Applications
- Accessible entrances and ADA-compliant corridors
- Healthcare, education, and government facilities
- High-traffic commercial office and retail doors
- Multi-family and hospitality common-area doors
- Fire-rated door assemblies requiring self-closing hardware
Manufacturer Resources
LCN 4040XP Series Cut Sheet
Product Specs
- Series:
- 4000 Series
- Duty Level:
- Heavy Duty
- ADA Compliant:
- Yes
- BAA Qualified:
- Yes
- Mounting Hole Pattern:
- 2-1/4" x 5"
- Warranty:
- 30 Year
- Closer Size:
- Adjustable 1-6
- Mounting Detail:
- Surface - Hinge Mount(Pull Side), Top Jamb Mount(Push Side), Parallel Arm Mount(Push Side)
- Mounting Location:
- Pull Side
- Subcategory:
- Surface Mounted Closers
- Product Group:
- Door Controls
- Product Subgroup:
- Door Closers - Surface Mounted
- Product Type:
- Surface Mounted Door Closers
- Finish Type:
- Powder Coat
- Fluid Type:
- All-Weather
- Commercial/Residential:
- Commercial
- MAP Policy:
- Yes
- Mounting Location:
- Push Side
- Tags:
- lcn 4041, lcn 4041 door closer, 4041 door closer, lcn 4041 closer, lcn4041, 4041 lcn, 4041 lcn closer, lcn 4041fp door closer, lcn 4041xp, lcn 4040, lcn 4041 closers, lcn 4041 xp, door closer 4041
- Product Model:
- 4041
- Cover Type:
- Plastic/Metal
- Delay Function:
- Yes
- Mounting Method:
- Surface Mount
- Product Category:
- Door Controls
- Product Substrate:
- Iron
- Department:
- Door Hardware
LCN 4041DEL-RWPA-689 – Frequently Asked Questions
1) Do I have to order a specific size of the LCN 4041, or will one unit cover different door widths?
One unit covers the range. The 4041 is non-handed and non-sized, with spring power adjustable through sizes 1 to 6, so the same closer handles a narrow interior door and a wide exterior one and the force is set in the field. The body is cast iron with a 1-1/2 inch piston and a double heat-treated steel pinion, rated ANSI/BHMA A156.4 Grade 1. The mounting hole pattern is 2-1/4 by 5 inches, so you can template the door or frame before the unit arrives.
2) What is the difference between the LCN 4041 and the LCN 4040XP?
The 4041 is the 4040XP platform fitted with the 3071 DEL Delayed Action Cylinder, ordered as CYLDEL. Same heavy duty cast iron closer underneath, same size 1-6 adjustable spring, same three mounting positions. What the delay cylinder adds is field-adjustable open time of up to roughly one minute before the door starts its close cycle. The cylinder is non-handed and is a separately replaceable component, so a 4041 in service can have that cylinder swapped without replacing the whole closer.
3) Does delayed action mean the door stays open, or is that a hold open arm?
They are two different functions and buyers mix them up constantly. Delayed action on the 4041 keeps the door standing open for up to about a minute and then closes it on its own, with no one having to release anything. That is the accessibility function, and it is on every 4041 because the delay cylinder is part of the unit. A hold open arm mechanically catches the door open until somebody pushes it shut, and that is a separate arm selection: H, HWPA, HCUSH, SHCUSH, HEDA-RH or LH, and HEDA62G-RH or LH. If you want both, order a hold open arm with the closer.
4) Can I use a hold open arm on the LCN 4041 if the door is fire rated?
No. The 4041 is cUL and UL listed for self-closing fire-rated doors, and the delayed action is fine on a rated opening because the door still closes by itself at the end of the delay. A mechanical hold open arm is not, because holding a fire door open defeats the self-closing function the listing depends on. On a rated opening, specify one of the non-hold-open arms: REGARM, LONG, RWPA, CUSH, SCUSH, EDA, or EDAW62G. Where a rated door genuinely has to stand open during the day, that is handled by an electromagnetic hold open released by the fire alarm, not by a hold open arm.
5) Which LCN 4041 arm do I order if there is no wall stop or floor stop behind the door?
Go with a Cush-n-Stop arm. CUSH and SCUSH build the stop into the arm shoe, so the arm limits the swing itself, which is what you want on a push side parallel arm application where there is no floor or wall stop or where the wall behind the door will not take one. SCUSH adds a spring in the stop to cushion the strike. The hold open versions of the same arms are HCUSH and SHCUSH. If the opening already has a stop but takes abuse, the EDA extra duty arm is the other heavy-use parallel arm choice, and EDAW62G is the same arm with the 62G thick hub shoe.
6) Can the LCN 4041 be mounted on the push side of the door, or does it have to go on the pull side?
All three positions are supported by the same closer: hinge side pull, which is the standard, top jamb push with the closer on the frame face, and parallel arm push with the closer on the door and the arm running back along the frame. What changes between them is the arm and bracket, not the unit. RWPA is the regular arm supplied with the parallel arm bracket and HWPA is the hold open version of that; the Cush-n-Stop and EDA arms are parallel arm mounts. The hole pattern is 2-1/4 by 5 inches in every case.
7) Which cover comes with the LCN 4041, and do I need to know the door hand to order it?
Cover is its own selection. The 4040XP-72 plastic cover is non-handed and is the standard cover. The 4040XP-72MC metal cover is handed, which is why it is ordered as RH or LH, and it is the cover LCN calls for on powder coat and plated finishes. So if you are taking the metal cover you need the hand of the door before you place the order; with the plastic cover you do not.
8) Is the LCN 4041 door closer handed? I have both right and left hand doors in the building.
The closer body is non-handed and so is the 3071 DEL delay cylinder, so one unit serves either hand and you can stock a single part number across a building. Two things on the order do carry a hand: the hold open extra duty arms, which come as HEDA-RH, HEDA-LH, HEDA62G-RH and HEDA62G-LH, and the metal cover, ordered RH or LH. The remaining arm options are ordered without a hand.
9) Does the LCN 4041 meet ADA and Buy American requirements for a government or healthcare job?
Both are covered. The 4041 is ADA compliant and BAA qualified, so it clears Buy American Act procurement language on federal and federally funded work, and it carries ANSI/BHMA A156.4 Grade 1 plus cUL and UL listing for self-closing fire-rated doors. The delayed action is the other half of the accessibility case: up to roughly a minute of open time gives someone using a wheelchair, a walker, or a cart room to clear the opening before the door begins to close.
10) Which other surface mounted door closers offer a delayed action function like the LCN 4041?
The LCN 4041 gets its delay from the 3071 DEL delayed action cylinder, field adjustable to hold the door open roughly one minute before it closes, on a cast iron 4040XP body with adjustable spring size 1-6. Two Orca Hardware models are built as delayed action closers: the BHDC1958DA/PA and the BHDC2011DA/PA, both supplied as a regular arm with parallel bracket, both tri-packed non-hold-open arms, both listed for 1-3/4 inch doors. The 4041 differs in that the delay comes from a separate replaceable cylinder and the arm is selected from fifteen configurations including regular, parallel bracket, extra duty, and Cush-n-Stop.
11) The opening does not need delayed closing. What heavy duty Grade 1 surface closer does the same job as an LCN 4041?
The LCN 4041 is a heavy duty closer rated ANSI/BHMA A156.4 Grade 1 with an iron body and adjustable spring size 1-6. Equivalents at the same duty level and grade include the Sargent 281 Powerglide, a cast iron heavy duty surface closer rated Grade 1; the BEST EHD9000 Series, an extra heavy-duty Grade 1 closer with adjustable spring sizes 1-6; the BEST HD8000 Series, heavy duty and Grade 1; and the Falcon SC71A of the SC70A Series, a heavy-duty Grade 1 surface-mount closer. The delayed action cylinder and the 1-6 spring range are what the 4041 brings to that group.
12) We need the door to stand open for deliveries, not just close slowly. What closer should we order instead?
Delayed action holds the door briefly and then closes it; a hold open arm keeps the door standing until it is pushed shut. The LCN 4041 covers hold open through its H, HWPA, HCUSH, SHCUSH, HEDA and HEDA62G arm configurations. Dedicated hold open models in the same class include the Accentra 51 Series industrial closer with hold open and tri-packed mount options, sizes 1-6; the Orca Hardware BHDC1958HO/PA with a tri-packed hold open arm for 1-3/4 inch doors; and the Stanley Security A45-501HL of the D-455 series, supplied with a long hold open arm for top jamb mounting.
13) The spec calls for a track arm rather than a projecting arm. What replaces an LCN 4041 on that opening?
The LCN 4041 uses projecting arms on hinge-side pull, top jamb push, or parallel arm push mounting with a 2-1/4 inch by 5 inch mounting hole pattern. Where a track is required instead, the Corbin Russwin DC5230 Series is a Grade 1 surface closer with a slide track arm as standard, pull side mounting, for 1-3/4 inch doors. The Dormakaba 8916-JT is a Grade 1 heavy duty closer with a jamb track and frame face mounting on the pull side, adjustable size 1-6, with a flat non-hold-open arm.
14) Will an LCN 4041 hold up on an exterior entrance door in a cold climate?
That is what the fluid and the body are for. The 4041 runs LCN Liquid X all-weather fluid, so sweep and latch speed stay consistent through temperature swings rather than slowing down in winter and racing in summer. The housing is cast iron, not aluminum, with a full-complement low-friction bearing system, and it is rated heavy duty for commercial use. Spring power adjusts through size 6, which is the range you need for a wide exterior door fighting stack pressure.
15) Can I swap a cheaper light duty closer in where an LCN 4041 is specified?
Not on the same opening. Closers such as the Arrow DC314 and DCN314 are light duty, and the DCN314 only adjusts through size 4; the Falcon SC91A is light duty and Grade 3. Those are built for interior doors with lighter traffic. The 4041 is a heavy duty cast iron unit with a size 1-6 spring range meant for high traffic corridors, accessible entrances, and institutional openings, and none of the light duty units carry the delayed action cylinder. If you need another brand at the same duty level, the BEST HD8000 Series and the Design Hardware 416 Series are both heavy duty surface closers.
16) Does the arm come with the LCN 4041 closer, or is that ordered separately?
The arm ships with the closer, but you choose which one at the time of order, from 15 options: REGARM, LONG, RWPA, HWPA, H, CUSH, HCUSH, SCUSH, SHCUSH, EDA, EDAW62G, HEDA-RH, HEDA-LH, HEDA62G-RH and HEDA62G-LH. Decide the mounting position first, because the arm is what determines whether the closer lands pull side hinge, top jamb, or parallel arm. Peel-n-stick templates and the Green Dial spring force indicator come in the box, so the installer can lay out the 2-1/4 by 5 inch hole pattern and verify spring force on site.
17) Will an LCN 4041 work on an aluminum storefront door, or is there a closer meant for that?
The LCN 4041 is a heavy duty cast iron closer templated for hinge-side pull, top jamb push, and parallel arm push mounting on commercial doors. For narrow aluminum storefront openings, the Norton Rixson 1600 Series of the 1600BC Series is described as an aluminum storefront door closer with tri-style mounting, heavy duty and Grade 1, so it is built around that door type. The Norton Rixson 1601P, also Grade 1, is a tri-mount surface closer with a 180 degree swing where the opening has to go that far back.
18) The door is a low traffic interior office door. Is there a lighter closer than the LCN 4041 for that?
The LCN 4041 is specified heavy duty for high-traffic corridors and accessible entrances. For light traffic openings, the BEST SL6000 Series is a light duty Grade 1 surface closer with adjustable spring sizes, the Norton Rixson 160 Series is a light duty Grade 1 light commercial closer with an adjustable spring, the Arrow DC314 of the DC300 Series is a light duty Grade 1 surface closer, and the Falcon SC91A of the SC90A Series is a light duty closer rated Grade 3. The Cal-Royal 400 Series is a Grade 2 commercial hydraulic closer.
19) What is the medium duty step down from the LCN 4041 for interior corridor doors?
The LCN 4041 is a heavy duty Grade 1 closer. Medium duty Grade 1 closers for the same kind of interior commercial opening include the BEST HD7000 Series with adjustable spring power and backcheck control, the Sargent 1131 for medium-traffic commercial applications, the Sargent 1331 with a universal aluminum body, the Norton Rixson 8501A tri-mount closer with an adjustable size 1-6 spring, and the Dormakaba 7303 Series painted standard duty closer. The Falcon SC61A of the SC60A Series covers light to medium duty at Grade 1.
20) Our doors never need more than a size 4 spring. Which closers cover that range instead of size 1-6?
The LCN 4041 is a non-sized closer adjustable across spring sizes 1 through 6, so one unit covers narrow interior doors up through wide exterior doors. Closers built for the narrower range include the Arrow DCN314, a Grade 1 surface closer with regular and parallel arm tri-pack and adjustable spring size 1 to 4; the Dormakaba 7414, a medium duty Grade 1 closer in size 1-4; and the Accentra 1101BF industrial closer with adjustable spring sizes 1-4 and tri-pack mounting. The Arrow DCN325 covers 1 to 6 in the same Grade 1 surface closer format, and the Calibre CA9901 is a Grade 1 tri-pack arm closer in size 2-5.
21) Which closers have a cast iron body like the LCN 4041, and which use aluminum?
The LCN 4041 body is iron, with a 1-1/2 inch diameter piston and a double heat-treated steel pinion. Among the peer closers, the Sargent 281 Powerglide is also a cast iron surface closer at heavy duty and Grade 1. On the aluminum side, the Falcon SC81A of the SC80A Series is a medium duty cast aluminum closer, the Falcon SC91A of the SC90A Series is a light duty cast aluminum closer, and the Sargent 1331 uses a universal aluminum body at medium duty. Body material tracks with the duty level each of these is built for.
22) Is the Arrow DCN500DP a substitute for an LCN 4041 door closer?
No. The Arrow DCN500DP is a parallel drop plate for the DCN500 closer, a mounting component rather than a closer body. The LCN 4041 is the closer itself, a surface mounted heavy duty unit with a delayed action cylinder that mounts hinge-side pull, top jamb push, or parallel arm push. Two other items that come up in the same searches are also not closers: the Stanley Security 327 is a heavy wardrobe pivot for 1-3/8 inch or 1-3/4 inch doors up to 150 lbs, and the Stanley Security 341 is a wardrobe pivot for flush recessed or overlay doors from 1-1/8 inch to 1-3/8 inch.
23) Which door closers ship tri-packed with all three mounting arms instead of ordering one arm type?
On the LCN 4041 the arm is selected up front from fifteen configurations, including regular, long, regular with parallel arm bracket, hold open, extra duty, and the Cush-n-Stop family, and the closer itself mounts hinge-side pull, top jamb push, or parallel arm push. Closers supplied tri-packed instead include the Design Hardware 116 Series and 416 Series, both heavy duty with a tri-packed non-hold-open arm; the Accentra 2701 Series architectural closer with tri-pack mounting options and adjustable spring sizes 1-6; and the Dormakaba 8616 AF86P, a heavy duty Grade 1 closer with a flat non-hold-open arm in a tri-pack. The Dexter DCH4000 Series is a Grade 1 tri-mount closer for regular, parallel, or top jamb mounting.
24) We need an ADA compliant closer for an accessible entrance. What else meets that besides the LCN 4041?
The LCN 4041 is ADA compliant and BAA qualified, rated Grade 1, with adjustable spring size 1-6 and the delayed action cylinder that extends open time at an accessible entrance. Other closers written for barrier free and ADA openings include the Cal-Royal 500S of the 500 Series, a Grade 1 barrier free closer with adjustable back-check; the Cal-Royal N900PBF of the 900 Series, a barrier free Grade 1 hydraulic surface closer; the Calibre CA4001 of the CA4000 Series, a Grade 1 hydraulic closer with adjustable spring tension for ADA; and the Imperial USA TC4300 Series, a Grade 1 heavy duty ADA closer in size 1-6.
25) What finishes does the LCN 4041 come in for matching hardware already in a building?
Six powder coat finishes: 689 aluminum, 690 statuary bronze, 691 light bronze, 693 gloss black, 695 dark bronze, and 696 brass. Every one of them is a powder coat, so if you want the metal cover rather than the standard plastic one, it is the handed 4040XP-72MC and you will need to give the hand of the door with the order. Finish is chosen alongside arm type, so a fleet of doors can be standardized on one finish across several different arm configurations.
26) What are the regular arm pull side alternatives to an LCN 4041 on a 1-3/4 inch door?
The LCN 4041 with the REGARM regular arm mounts hinge side on the pull side of the door. Corbin Russwin offers three Grade 1 surface closers for 1-3/4 inch doors in that configuration: the DC3200 of the DC3000 Series with a regular arm, the DC6200 of the DC6000 Series with a double lever regular arm and pull side mounting, and the DC8200 of the DC8000 Series, also a double lever regular arm on the pull side. The 4041 adds the delayed action cylinder and a spring adjustable across sizes 1 through 6.
27) Does an LCN 4041 come with a cover, and how does that compare with other closers?
The LCN 4041 uses a cover as part of the assembly: the non-handed 4040XP-72 plastic cover is standard, and the handed 4040XP-72MC metal cover is used with the powder coat and plated finishes, ordered right hand or left hand. Among the peers, the Arrow DCN314 and DCN325 Grade 1 surface closers are supplied less cover, and the Design Hardware 316 Series, a medium to heavy duty closer with a tri-packed non-hold-open arm, comes with a cover. The Dexter DCH1000 Series is a Grade 1 tri-mount closer supplied with a full cover.
How fast can I get the LCN 4041DEL-RWPA-689 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the LCN 4041DEL-RWPA-689 come with a warranty?
Absolutely. The LCN 4041DEL-RWPA-689 is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the LCN 4041DEL-RWPA-689?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the LCN 4041DEL-RWPA-689 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.
