LCN 4110T-3077T Standard Arm A...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$170.00
$133.86
LCN 4110T-3077T - Standard Arm, Handed

LCN 4110T-3077T Standard Arm Assembly - Handed Configuration

(No reviews yet) Write a Review

Model: 4110T-3077T RH 689
Selected Finish is

In Stock (leaves warehouse same day if ordered before 3pm ET)

$170.00
$133.86
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like

LCN 4110T Series Standard Arm Assembly - Handed Configuration

Professional Door Closer Replacement Component

The LCN 4110T Series Standard Arm Assembly provides reliable replacement functionality for commercial door closer systems. This handed configuration arm is designed specifically for the 4110T Series door closers, ensuring proper operation and ADA compliance in commercial applications. The arm assembly requires a separate roller component for complete installation.

Professional Features & Benefits

  • Series-Specific Design: Engineered exclusively for 4110T Series door closers for guaranteed compatibility and optimal performance.
  • Handed Configuration: Pre-configured for specific door swing direction to ensure proper installation and operation.
  • ADA Compliant Operation: Meets accessibility requirements for commercial door control applications.
  • Commercial-Grade Construction: Built to withstand the demands of high-traffic commercial environments.
  • Modular Design: Allows for targeted replacement without full closer system replacement, reducing maintenance costs.
  • Professional Installation: Designed for installation by qualified door hardware technicians for reliable long-term performance.

Technical Specifications

  • ADA Compliant: Yes
  • Commercial/Residential: Commercial
  • Department: Door Hardware
  • Parts and Accessories Type: Replacement Parts
  • Product Attribute: Parts and Accessories
  • Product Category: Door Controls
  • Product Group: Door Controls
  • Product Model: 4110T-3077T
  • Product Subgroup: Parts and Accessories
  • Product Type: Arm
  • Series: 4110T Series
  • Subcategory: Parts and Accessories

Professional Applications

  • Commercial Office Buildings
  • Educational Facilities
  • Healthcare Institutions
  • Retail Establishments
  • Industrial and Warehouse Facilities
  • Multi-Tenant Residential Properties
  • Government and Municipal Buildings

Why Choose LCN Quality?

LCN door closer components deliver professional-grade reliability with precision engineering designed for demanding commercial applications. This ADA-compliant arm assembly ensures continued compliance and smooth operation when replacing worn components in existing 4110T Series installations. Engineered for demanding commercial applications where dependable door control performance is essential.

Manufacturer Resources

LCN Full Line Catalog

Product Specs

Subcategory:
Parts and Accessories
Series:
4110T Series
Product Group:
Door Controls
Product Subgroup:
Parts and Accessories
Product Type:
Door Closer Arms
Commercial/Residential:
Commercial
ADA Compliant:
Yes
Parts and Accessories Type:
Replacement Parts
Product Attribute:
Parts and Accessories
Product Model:
4110T-3077T
Product Category:
Door Controls
Department:
Door Hardware

LCN 4110T-3077T RH 689 – Frequently Asked Questions

1) Do I have to order the LCN 4110T-3077T arm left hand or right hand?
Yes, the 4110T-3077T standard arm is a handed part, so you order it LH or RH to match the door swing. Both hands are stocked in all 13 finishes. If you get the hand wrong the arm will not set up correctly on the closer, so confirm the swing at the door before you order.
2) Is anything else needed to install the 4110T-3077T arm, or is the assembly complete?
A separate roller component is not included and has to be ordered with it. The arm assembly itself covers the arm, so plan on sourcing the roller before you send a tech to the door, otherwise the closer cannot be reassembled on site.
3) Will this arm fit an LCN closer other than the 4110T?
No. The 3077T standard arm is built for the 4110T Series only. Other LCN closer families use their own arm and track geometry, so pull the model number off the closer body before ordering. If the closer is not a 4110T, you need the arm listed for that series.
4) Can a Falcon 8230-3077PLCM arm be used in place of the LCN 4110T-3077T standard arm?
No. The LCN 4110T-3077T is a handed standard arm assembly engineered specifically for 4110T Series door closers, and it requires a separate roller component to complete the installation. The Falcon 8230-3077PLCM is a standard arm with track built for Falcon 8230 Series automatic door operators in the 8200 Series. Even though both are track-style standard arms, each is matched to its own closer or operator body, so an arm from one series will not mount or pivot correctly on the other. Order the arm that matches the closer already on the door.
5) I need a door closer arm that also stops the door at a set opening - what should I look at instead of the LCN 4110T-3077T?
The 4110T-3077T is a plain standard arm assembly for 4110T Series closers with no stop or hold-open built into it. If the opening needs the arm to control travel, the Falcon SC60A-3049DS is a hold-open dead stop parallel arm assembly for SC60A Series closers, and the Sargent 25-CPS is a heavy duty Grade 1 parallel arm with compression stop for 351 and 281 closers. Both of those are parallel arm designs with the stop function in the arm itself, so the closer body on the door has to be the matching Falcon or Sargent unit.
6) I manage a building with mixed door finishes. What finishes does the 4110T standard arm come in?
Thirteen finishes, in both hands: 616 satin bronze blackened, 632 bright brass, 633 satin brass, 639 satin bronze, 646 satin nickel, 651 bright chrome, 652 satin chrome, 689 aluminum, 690 statuary bronze, 691 light bronze, 693 gloss black, 695 dark bronze and 696 brass. 689 aluminum and 695 dark bronze are the two you will most often find already on commercial openings.
7) Does replacing just the arm keep the closer ADA compliant?
The 4110T-3077T arm is ADA compliant, so a like-for-like arm swap keeps an existing 4110T installation compliant without replacing the whole closer. Opening force still depends on how the closer is adjusted after the arm goes back on, so re-check the spring and valve settings once it is installed.
8) Is it worth replacing just the closer arm instead of the whole door closer?
For a 4110T with a damaged or worn arm and a sound closer body, the arm is a standalone replacement part, which is the point of ordering it: you repair the opening without pulling and re-drilling for a new closer. If the body is leaking oil or will no longer hold an adjustment, replace the closer instead.
9) Is this a parallel arm or a standard arm, and does that change the mounting?
It is a standard arm, not a parallel arm. A standard arm mounts with the closer on the pull side and the arm projecting out from the door. If your opening needs the closer on the push side with the arm running flat back to the frame, you want a parallel arm setup instead, such as the Falcon SC60A-3049DS hold-open dead stop parallel arm for SC60A closers or the Sargent 25-CPS parallel arm with compression stop for 351 and 281 closers.
10) I need the arm to hold the door open. Does the 4110T-3077T do that?
No hold-open function on this one, it is a plain standard arm. For a hold-open arm you would be looking at something like the Sargent 25-H for 351 and 281 closers, the Sargent 25-CPSH hold-open parallel arm with compression stop, or the Falcon SC70A-3049/PA hold open arm with PA bracket for SC70A closers. Those are brand and series specific, so match the arm to the closer you already have on the door.
11) Which arm gives hold-open on a regular (standard) mount rather than parallel arm?
The LCN 4110T-3077T is a standard arm without hold-open. For a hold-open arm that works on standard and top jamb mounting, the Sargent 25-H is a heavy duty Grade 1 hold-open arm for Sargent 351 and 281 closers. If the mounting is parallel arm, the Sargent 25-CPSH is the heavy duty hold-open parallel arm with compression stop for the same 351 and 281 closer bodies. Both are Sargent components and pair only with Sargent closers, so confirm the closer body before ordering.
12) The closer body itself is worn out, not just the arm - what replaces the whole unit?
The LCN 4110T-3077T covers the arm only; it is a replacement part for an existing 4110T Series closer and does not include a closer body. If the body needs replacing too, the Sargent 1431-CPS TB EN is a complete heavy duty Grade 1 surface door closer supplied with a parallel arm and compression stop, and the Sargent 25-CPS is a heavy duty Grade 1 parallel arm closer with compression stop compatible with 351 and 281. Those are full closer units rather than arm-only components.
13) Will the LCN 4110T-3077T work on a center hung door with a floor pivot?
No. The 4110T-3077T is a handed standard arm assembly for 4110T Series surface closers and mounts to the closer body and the frame or door face. For a center hung application, the Falcon OHC100A-DP is a center hung floor pivot with end load arm intended for OHC100 Series overhead concealed closers. That is a different mounting approach entirely, so the door prep and closer type decide which one applies.
14) Does the LCN 4110T-3077T come non-handed like some other closer arms?
No. The 4110T-3077T is supplied in a handed configuration, pre-set for a specific door swing direction, and is ordered as either left hand or right hand across finishes such as 689 aluminum, 695 dark bronze and 652 satin chrome. By contrast, the Falcon SC70A-3049/PA is a hold open arm supplied with a PA bracket for SC70A Series closers, a parallel arm package rather than a handed standard arm. Determine the swing of the opening before ordering the 4110T arm.
15) Is this arm rated for high traffic commercial openings or is it a light duty part?
It is a commercial-grade part, not residential hardware, and it is the arm LCN specifies for 4110T closers in traffic like schools, hospitals, retail, offices, warehouses and government buildings. For a heavy duty Grade 1 closer and arm assembly as a complete unit, the Sargent 1431-CPS TB EN surface closer with parallel arm and compression stop is a heavy duty Grade 1 option.
16) Can I standardize one finish across a whole facility of 4110T closers?
Yes. Every one of the 13 finishes is offered in both left hand and right hand, so you can carry a single finish across an entire building and only vary the hand door to door. That makes 689 aluminum or 695 dark bronze practical to stock on the shelf for a fleet of 4110T openings.
How fast can I get the LCN 4110T-3077T RH 689 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the LCN 4110T-3077T RH 689 come with a warranty?
Absolutely. The LCN 4110T-3077T RH 689 is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the LCN 4110T-3077T RH 689?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the LCN 4110T-3077T RH 689 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!