LCN 6034-POWDER Pacer Double-A...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$1,889.00
$1,416.56
LCN LCN 6034 Pacer Double-Acting, Concealed In Frame, Single Lever Arm Track Closer - Powder Coat Finish LCN-6034-POWDER

LCN 6034-POWDER Pacer Double-Acting Concealed Door Closer with 1-3/4" Header Compatibility and Powder Coat Finish

(No reviews yet) Write a Review

Model: 6034-689
Selected Finish is
  • LCN ADDER-LCN-6030-[TRACK]=Track with Bumper (BUMP) ADDER-LCN-6030-[TRACK]=Track with Bumper (BUMP)
  • LCN ADDER-LCN-6030-[TRACK]=Hold Open Track with Bumper (HBMP) ADDER-LCN-6030-[TRACK]=Hold Open Track with Bumper (HBMP)

In Stock (leaves warehouse same day if ordered before 3pm ET)

$1,889.00
$1,416.56
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like

LCN 6034 Pacer Double-Acting Concealed Door Closer with 1-3/4" Header Compatibility and Powder Coat Finish

Heavy-Duty Concealed Door Closer for Narrow Frame Applications

The LCN 6034 Pacer is a heavy-duty double-acting concealed door closer engineered for installation in narrow aluminum transoms with minimum 1-3/4" header requirements. This Grade 1 certified closer features cast iron cylinder construction with a 1-1/8" diameter one-piece forged steel piston and accommodates spring sizes 1-5. The non-handed design meets ANSI/BHMA A156.4 Grade 1 standards and ADA reduced opening force requirements for professional commercial applications.

Professional Features & Benefits

  • Narrow Frame Compatibility: Designed to fit in minimum 1-3/4" (44mm) x 4" (102mm) aluminum transom headers for space-constrained installations.
  • Heavy-Duty Construction: Cast iron cylinder with 1-1/8" diameter one-piece forged steel piston and full-complement low-friction bearing for exceptional durability.
  • Double-Acting Operation: Non-handed design allows door operation in both directions with independent spring power and latch speed adjustments for either swing.
  • Grade 1 Performance: ANSI/BHMA A156.4 Grade 1 certified and UL/cUL listed for self-closing doors without hold-open functionality.
  • ADA Compliance: Meets American Disabilities Act reduced opening force requirements for accessible door operation.
  • All-Weather Reliability: All-weather fluid and tamper-resistant regulating screws ensure consistent performance in varying environmental conditions.
  • Manufacturer Warranty: 15-year limited warranty provides long-term protection and confidence in product reliability.
  • Powder Coat Finish: Standard powder coat finish with optional SRI primer available for installations in corrosive conditions.

Technical Specifications

  • ADA Compliant: Yes
  • BAA Qualified: Yes
  • Closer Size: 4
  • Commercial/Residential: Commercial
  • Default Arm/Track: Standard Arm (STDTRKARM)
  • Delay Function: No
  • Department: Door Hardware
  • Door Type: Exterior Door
  • Door Type: Interior Door
  • Duty Level: Heavy Duty
  • Fasteners: Wood and Machine Screws
  • Finish Type: Powder Coat
  • Fluid Type: All-Weather
  • Handle Type: Lever
  • Mounting Detail: Concealed - In Frame
  • Mounting Location: In Frame
  • Mounting Method: Concealed
  • Product Category: Door Controls
  • Product Group: Door Controls
  • Product Model: 6034
  • Product Subgroup: Door Closers - Overhead Concealed
  • Product Substrate: Iron
  • Product Type: Overhead Concealed Closers
  • Series: 6030 Series
  • Subcategory: Concealed Closers
  • Warranty: 15 Year

Professional Applications

  • Commercial Office Buildings
  • Educational Facilities
  • Healthcare Institutions
  • Retail Establishments
  • Industrial and Warehouse Facilities
  • Multi-Tenant Residential Properties
  • Government and Municipal Buildings

Why Choose LCN Quality?

LCN 6034 Pacer door closers deliver professional-grade reliability with cast iron cylinder construction and forged steel components rated for Grade 1 performance standards. Backed by a 15-year limited warranty and engineered with all-weather fluid for consistent operation. Designed for demanding commercial applications where dependable double-acting door control and ADA compliance are essential.

Product Specs

Series:
6030 Series
ADA Compliant:
Yes
BAA Qualified:
Yes
Warranty:
15 Year
Closer Size:
4
Default Arm/Track:
Standard Arm (STDTRKARM)
Duty Level:
Heavy Duty
Subcategory:
Concealed Closers
Mounting Location:
In Frame
Product Group:
Door Controls
Product Subgroup:
Door Closers - Overhead Concealed
Product Type:
Overhead Concealed Closers
Mounting Detail:
Concealed - In Frame
Door Type:
Interior Door
Finish Type:
Powder Coat
Fluid Type:
All-Weather
Fasteners:
Wood and Machine Screws
Commercial/Residential:
Commercial
Handle Type:
Lever
Door Type:
Exterior Door
Product Model:
6034
Delay Function:
No
Mounting Method:
Concealed
Product Category:
Door Controls
Product Substrate:
Iron
Department:
Door Hardware

LCN 6034-689 – Frequently Asked Questions

1) Does the LCN 6034 closer work on a double-acting door that swings both ways?
Yes, and that is the point of the 6034 Pacer. It is a double-acting, non-handed closer, so one part covers either swing and there is no left or right hand to specify when you order. Spring power and latch speed adjust independently for each direction, so you can tune the push side and the pull side separately rather than settling for one compromise setting.
2) Is the LCN 6034 Pacer ADA compliant and does it meet Grade 1?
Both. The 6034 Pacer is certified to ANSI/BHMA A156.4 Grade 1 and meets ADA reduced opening force requirements, and it is UL and cUL listed for self-closing doors without hold open. For an institutional spec that calls out Grade 1 door controls with accessible opening force, it answers the line item. It is also BAA qualified, which matters if you are buying under federal or municipal procurement rules.
3) Do I have to order a track separately with the LCN 6034 concealed closer?
The track is a required selection on the 6034, so you pick it as part of the order rather than adding it later. Two choices: the default track with bumper (BUMP), or a hold open track with bumper (HBMP) if you want the door to stay parked at a set opening. Note the UL/cUL listing on this closer is for self-closing service without hold open, so on a fire rated opening the plain BUMP track is the one to take. The default arm is the standard arm.
4) What size is the LCN 6034 and can I adjust the closing force after install?
The 6034 is a size 4 closer, and the cylinder covers spring sizes 1 through 5, so you can dial the power up or down on site to suit the door width and any wind load on an exterior opening. Regulating screws are tamper resistant, which matters on a public entrance where tenants like to fiddle with the closing speed.
5) Can the LCN 6034 be used on an exterior entrance door, or is it interior only?
Exterior and interior both. The 6034 runs all-weather fluid, so it does not stiffen up in a cold entrance vestibule or run loose in summer heat the way a single-temperature fluid closer does. Standard finish is powder coat, with an SRI primer option for corrosive conditions such as coastal or pool environments.
6) Is a concealed in-frame closer like the LCN 6034 the right choice, or should I use a surface closer?
Pick the concealed 6034 when you want nothing visible on the door or frame face, or when the door swings both directions. It hides in the transom header, which is standard practice on aluminum and glass storefront entrances. A surface mounted closer is the easier call when there is no transom header to receive the cylinder, when you want to service the unit without pulling it out of the frame, or when you are retrofitting an existing opening that was never prepped for concealed hardware. Concealed also means the frame has to be prepped for it, so on a retrofit confirm the header will take the cylinder before you buy.
7) How durable is the LCN 6034 for a high traffic entrance?
Heavy duty, commercial rated. The cylinder is cast iron with a 1-1/8 inch diameter one-piece forged steel piston running on a full-complement low-friction bearing. That is the construction you want on a main entrance in a school, hospital, or retail space that cycles all day, rather than a light commercial closer that will need replacing.
8) Does the LCN 6034 have a delayed action feature for accessibility?
No delay function on the 6034. It meets ADA reduced opening force, but if your spec calls for delayed closing so a slower user can clear the opening, this closer will not give you that and you need a closer that lists delayed action. Everything else adjusts: spring power across sizes 1 to 5 and latch speed, independently for each swing direction.
9) What finishes does the LCN 6034 Pacer come in?
Six powder coat finishes on the 6034: 689 aluminum, 690 statuary bronze, 691 light bronze, 693 gloss black, 695 dark bronze, and 696 brass. If you are standardizing a building, 689 and 695 are the two that most commonly match existing aluminum storefront. Most of the closer sits inside the header anyway, so the finish you are matching is the exposed arm and track.
10) What fasteners come with the LCN 6034 closer?
The 6034 ships with wood and machine screws, so it covers both a metal frame and a wood application out of the box. The header prep itself is not included hardware, so if you are cutting into an existing aluminum transom, plan on the template work as part of the install.
How fast can I get the LCN 6034-689 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the LCN 6034-689 come with a warranty?
Absolutely. The LCN 6034-689 is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the LCN 6034-689?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the LCN 6034-689 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!