LCN 8310-810S/SA Heavy Duty To...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$915.00
$692.86
LCN 8310-810S/SA Touchless Actuator, Single Gang, Hand Wave or Wheelchair Icon and Text

LCN 8310-810S/SA Heavy Duty Touchless Actuator with 2" to 24" Detection Range and Dual Icon Options

(No reviews yet) Write a Review

Model: 8310-810S
Selected Icon is

In Stock (leaves warehouse same day if ordered before 3pm ET)

$915.00
$692.86
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like

LCN 8310 Series Heavy Duty Touchless Actuator with 2" to 24" Detection Range and Dual Icon Options

Professional Touchless Access Control Solution

The LCN 8310 Series touchless actuator provides contactless door activation for automatic operator systems with stainless steel construction designed for heavy duty applications. This single gang wall plate features a 2" to 24" detection range and is compatible with 880 receiver systems. Available with either hand wave icon (8310-810S) or wheelchair icon (8310-810SA) for clear user guidance and ADA compliance applications.

Professional Features & Benefits

  • Extended Detection Range: 2" to 24" sensing distance provides flexible activation zone for various user heights and mobility requirements.
  • Heavy Duty Construction: Stainless steel construction engineered for high use and abuse environments with superior durability.
  • IP65 Weather Protection: Rated enclosure protects electronic components from water and cleaning liquids for reliable operation.
  • Flexible Power Options: 12VAC/DC/24VDC/24VAC operation accommodates various system requirements with Form C relay action.
  • System Compatibility: Compatible with 880 receiver for seamless integration with existing automatic door operator systems.
  • Dual Icon Options: Available with hand wave icon (810S) or wheelchair accessibility icon (810SA) for clear user instruction and ADA compliance.
  • Flush Mounted Design: Aesthetically pleasing installation that is less susceptible to accidental damage compared to protruding actuators.
  • Contactless Operation: Motion sensing technology eliminates need for physical contact with actuators, door handles, or push bars for improved hygiene.

Technical Specifications

  • ADA Compliant: Yes
  • Application: For use with power operators
  • Commercial/Residential: Commercial
  • Department: Door Hardware
  • Display Text: Wave To Open
  • Electronic: Yes
  • Mounting Method: Flush Mount
  • Parts and Accessories Type: Installation Accessories
  • Product Attribute: Parts and Accessories
  • Product Category: Electronic Access Controls
  • Product Group: Electronic Access Controls
  • Product Model: 8310-810S/SA
  • Product Shape: Rectangle
  • Product Subgroup: Parts and Accessories
  • Product Substrate: Stainless Steel
  • Product Type: Door Actuators & Plates
  • Product Voltage: 12VAC/DC/24VDC/24VAC
  • Relay Action: Form C
  • Series: 8310 Series
  • Subcategory: Closer Parts and Accessories
  • Symbol: Wave or Wheelchair

Professional Applications

  • Healthcare Facility Access Control
  • Commercial Building Security Systems
  • Educational Institution Safety Systems
  • ADA Compliant Automatic Door Systems
  • High-Traffic Commercial Entrances
  • Industrial Facility Monitoring
  • Retail Loss Prevention

Why Choose LCN Quality?

LCN touchless actuators deliver professional-grade reliability with stainless steel construction and IP65 rated protection engineered for demanding heavy duty applications. The flush mounted design and customizable visual and audible signaling features ensure dependable contactless operation where hygiene and accessibility are essential.

Product Specs

Series:
8310 Series
Display Text:
Wave To Open
Relay Action:
Form C
Symbol:
Wave or Wheelchair
Application:
For use with power operators
Subcategory:
Closer Parts and Accessories
Product Group:
Electronic Access Controls
Product Subgroup:
Parts and Accessories
Product Type:
Door Actuators & Plates
Commercial/Residential:
Commercial
Electronic:
Yes
ADA Compliant:
Yes
Parts and Accessories Type:
Installation Accessories
Product Attribute:
Parts and Accessories
Product Model:
8310-810S/SA
Product Voltage:
12VAC/DC/24VDC/24VAC
Mounting Method:
Flush Mount
Product Shape:
Rectangle
Product Substrate:
Stainless Steel
Product Category:
Electronic Access Controls
Department:
Door Hardware

LCN 8310-810S – Frequently Asked Questions

1) Will the LCN 8310 touchless actuator open a door on its own, or do I need an automatic operator?
The 8310-810S/SA is an activation switch only, not a door operator. It's for use with power operators, and it signals through a Form C relay on the 12VAC/DC, 24VDC or 24VAC range your operator supplies. If the opening has no automatic operator on it already, the actuator alone will do nothing; you need the low energy operator, the wiring and the power supply as part of the same job.
2) Do I need to cut a box into the wall for the LCN 8310 actuator, or can it surface mount?
Flush mount, single gang. The 8310-810S/SA drops into a standard single gang box, so the rough-in has to be there before finish. That's the trade-off for the flush look: it sits nearly level with the wall and takes far less abuse than a protruding plate, but you cannot slap it onto a finished jamb without a box. If you're retrofitting where there is no box, the Falcon 8310-819F rugged plastic actuator mounting box, a 1-1/2 by 4-3/4 inch rectangle that jamb or flush mounts, is the surface-mount answer we carry.
3) What is the difference between the LCN 8310-810S and the 8310-810SA?
Icon only. The 810S carries the hand wave icon, the 810SA the wheelchair accessibility icon; both read "Wave To Open" and both are the same stainless steel single gang flush plate with the same electrical behavior. Pick the wheelchair icon where the opening is being signed as an accessible entrance, and the hand wave where the point is hygiene or hands-free convenience. Common practice in a facility is to standardize one icon per entrance type so users learn it.
4) How close does someone have to get for the LCN 8310 touchless actuator to trigger?
Anywhere from 2 inches out to 24 inches. That range is what makes it work for a wheelchair user approaching at a different height and angle than someone walking up, and it means you can tune it in so a person passing by in a corridor doesn't fire the door. Set it toward the short end in a tight lobby or a busy circulation path; open it up where you want the door reacting before the user is on top of the plate.
5) Is a wave-to-open actuator or a push plate better for an accessible entrance?
Depends on who uses the door and how dirty it gets. The LCN 8310 is a no-contact plate, so nobody touches anything to open the door, which is the point in healthcare and food service. A mechanical push plate like the Camden CM-45 Series, a 4-1/2 inch square push switch available wired or with a kinetic wireless transmitter, needs physical contact but gives a positive tactile confirmation and can go in without running wire if you use the wireless version. If pulling wire to the actuator location is the hard part of your job, the wireless push plate solves a problem the 8310 does not.
6) What voltage do I need to run to an LCN 8310 touchless actuator?
It takes 12VAC/DC, 24VDC or 24VAC, so it runs off the auxiliary output most low energy operators and access control power supplies already provide. Output is a Form C relay, meaning you get a common with both a normally open and a normally closed contact, so it wires into an operator input or an access control input either way without an interface module.
7) What is the difference between the LCN 8310-810S/SA touchless actuator and a Camden CM-45 push plate switch?
The LCN 8310-810S/SA is a contactless actuator: the user waves a hand in front of the stainless steel single gang plate, which reads Wave To Open, and no physical contact is made. The Camden CM-45 is a 4-1/2 inch square push plate switch, so the user presses the plate to activate the operator. Both signal a power operator, but only the 8310-810S/SA avoids touch, which is the deciding factor in healthcare and other hygiene-driven openings. The 8310-810S/SA carries a Form C relay and runs on 12VAC/DC, 24VDC or 24VAC.
8) Is the Falcon 8310-819F the same thing as an LCN 8310 touchless actuator?
No. The Falcon 8310-819F is a rugged plastic actuator mounting box measuring 1-1/2 inches by 4-3/4 inches for jamb and flush mount applications - it is the enclosure an actuator sits in, with no sensing electronics of its own. The LCN 8310-810S/SA is the actuator itself: a stainless steel single gang plate with a 2 inch to 24 inch detection range, Form C relay output and 12VAC/DC, 24VDC or 24VAC power. Ordering the 819F alone gives a buyer a box and no switch.
9) Can I use a touchless wave plate outside, or in a washroom that gets hosed down?
Yes on both, within reason. The 8310 actuator's enclosure is IP65 rated, which covers water jets and cleaning liquids, and the plate itself is stainless steel rather than plastic. That's the combination you want in a healthcare washroom that gets wiped with disinfectant several times a day, or a covered exterior entrance. IP65 is a washdown and weather rating, not an immersion rating.
10) Will the LCN 8310 actuator work with a wireless receiver so I don't have to run wire to it?
It's compatible with the 880 receiver, which is how you get the actuator talking to the operator without a hard-wired run all the way back. That matters most on retrofits into finished masonry or glass front entrances where fishing a cable to the plate location is the expensive part of the job. Confirm the operator on the door accepts the receiver's output before you order.
11) Is the LCN 8310 wave actuator ADA compliant?
The 8310-810S/SA is ADA compliant, and the 810SA version carries the wheelchair icon for signing an accessible entrance. Bear in mind the actuator is one piece of an accessible opening: the operator, the opening force and the mounting location and height all fall under your local accessibility requirements too. The plate satisfies the activation device part of that.
12) Will a wave actuator hold up in a school corridor or a hospital entrance?
That's what it's built for. Stainless steel plate, IP65 enclosure, and a flush mount that sits back from the traffic so carts, gurneys and bags don't catch it the way a protruding actuator does. It's a commercial device, not a residential one. On high abuse openings the flush mount is the specification detail that matters most, because a protruding plate is the part that gets knocked off.
13) What do I use if the wall will not take a flush mounted actuator plate?
The LCN 8310-810S/SA is a flush mount plate, so it needs a wall or jamb cavity to sit into. Where that is not available, the Falcon 8310-819F rugged plastic actuator mounting box, 1-1/2 inches by 4-3/4 inches, is made for jamb and flush mount applications and gives the actuator an enclosure on the surface of a narrow jamb or a wall that cannot be cut in. Both are 8310 Series parts.
14) I cannot run wire to the actuator location - what are my options?
The LCN 8310-810S/SA is a powered device that takes 12VAC/DC, 24VDC or 24VAC and switches through a Form C relay, so it needs a wire run to the plate location, though it will work with an 880 receiver. Where no wire can be pulled, the Camden CM-45 series 4-1/2 inch square push plate switch is offered wired or with a kinetic wireless transmitter, which sends the activation signal without a home run to the plate. The tradeoff is that the CM-45 is pressed rather than waved.
15) Can I standardize on one wave actuator across an entire building's automatic doors?
You can, and the 8310-810S/SA is set up for it: one single gang flush plate, one "Wave To Open" legend, two icon choices, and a voltage range covering 12VAC/DC, 24VDC and 24VAC so it drops onto operators with different power supplies. Facilities typically spec the wheelchair icon at designated accessible entrances and the hand wave icon everywhere else, which keeps the wall prep identical building-wide while the signage still reads correctly at each opening.
How fast can I get the LCN 8310-810S delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the LCN 8310-810S come with a warranty?
Absolutely. The LCN 8310-810S is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the LCN 8310-810S?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the LCN 8310-810S from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!