LCN 8310-859 Handheld Remote C...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$285.66
$200.81
LCN LCN 8310-859 Handheld Remote Control to Program LCN Safety/Motion Sensors LCN-8310-859

LCN 8310-859 Handheld Remote Control for Touchless Sensor Programming

(No reviews yet) Write a Review

Model: 8310-859

In Stock (leaves warehouse same day if ordered before 3pm ET)

$285.66
$200.81
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like

LCN Handheld Remote Control for 8310 Series Touchless Sensor Programming

Professional Programming Tool for Touchless Access Control Systems

The LCN Handheld Remote Control is specifically designed to program LCN 8310-877 Header Mount Safety Sensors and 8310-854 Header Mount Motion Sensors. This essential programming tool enables technicians to configure touchless actuator systems that promote health and well-being by eliminating contact with door hardware. Compatible with LCN's complete range of 8310 Series touchless actuators, this remote control streamlines setup and adjustment of motion detection parameters for optimal performance in commercial access control applications.

Professional Features & Benefits

  • Dedicated Sensor Programming: Specifically designed to program 8310-877 Header Mount Safety Sensors and 8310-854 Header Mount Motion Sensors for precise configuration control.
  • Touchless Technology Support: Enables programming of advanced motion sensing systems that eliminate the need for contact with actuators, door handles, or push bars.
  • Professional Installation Tool: Streamlines setup and configuration of LCN 8310 Series touchless actuators for efficient installation workflows.
  • System Integration: Compatible with LCN's complete range of 8310 Series touchless actuators including heavy-duty, standard, close-proximity, and harsh environment models.
  • Health and Safety Enhancement: Supports installation of contactless access systems that promote hygiene and reduce disease transmission in high-traffic facilities.
  • Versatile Application Support: Works with systems designed for various environments from standard commercial applications to harsh outdoor conditions with IP65-rated components.
  • ADA Compliant Design: Meets accessibility requirements for commercial installations and public facilities.

Technical Specifications

  • ADA Compliant: Yes
  • Application: Used to program 8310-877 Header Mount Safety Sensor or 8310-854 Header Mount Motion Sensor
  • Commercial/Residential: Commercial
  • Department: Door Hardware
  • Electronic: Yes
  • Parts and Accessories Type: Installation Accessories
  • Product Attribute: Parts and Accessories
  • Product Category: Electronic Access Controls
  • Product Dimension: 1 x 1 x 1"
  • Product Group: Electronic Access Controls
  • Product Model: 8310-859
  • Product Subgroup: Parts and Accessories
  • Product Type: Parts and Accessories
  • Series: 8310 Series
  • Subcategory: Closer Parts and Accessories

Professional Applications

  • Commercial Building Access Control Systems
  • Healthcare Facility Touchless Entry
  • Educational Institution Safety Systems
  • Retail Establishment Hygiene Solutions
  • Industrial Facility Contactless Access
  • Government and Municipal Buildings
  • High-Traffic Public Facilities

Why Choose LCN Quality?

LCN programming tools deliver professional-grade reliability for configuring advanced touchless access control systems. Engineered to work seamlessly with LCN's comprehensive 8310 Series touchless actuators, this remote control ensures precise sensor configuration for demanding commercial applications where dependable contactless operation is essential.

Product Specs

Series:
8310 Series
Application:
Used to program 8310-877 Header Mount Safety Sensor or 8310-854 Header Mount Motion Sensor
Subcategory:
Closer Parts and Accessories
Product Group:
Electronic Access Controls
Product Subgroup:
Parts and Accessories
Product Type:
Parts and Accessories
Commercial/Residential:
Commercial
Electronic:
Yes
ADA Compliant:
Yes
Parts and Accessories Type:
Installation Accessories
Product Attribute:
Parts and Accessories
Product Model:
8310-859
Product Dimension:
1 x 1 x 1"
Product Category:
Electronic Access Controls
Department:
Door Hardware

LCN 8310-859 – Frequently Asked Questions

1) What does the LCN 8310-859 remote control actually do, and do I need one to install a touchless sensor?
The 8310-859 is a handheld programming remote for LCN 8310 Series touchless sensors. It is the tool you use to configure the 8310-877 Header Mount Safety Sensor and the 8310-854 Header Mount Motion Sensor after they are mounted, setting the detection parameters. It is not part of the door hardware and it does not mount to the opening. If you are installing either of those header mount sensors, this is the device that sets them up.
2) Will the LCN 8310-859 remote program my touchless push plate or wave-to-open actuator?
No. The 8310-859 remote is for header mount sensors only, specifically the 8310-877 safety sensor and the 8310-854 motion sensor. Touchless actuators and push plates in the 8310 Series are set up on the device itself, not through this remote. If the part you are trying to adjust is mounted at the header and detects traffic in the door swing, this is the right tool; if it is the wall-mounted plate the user waves at, it is not.
3) Is there a non-LCN handheld remote that will program an 8310-877 safety sensor or 8310-854 motion sensor?
No. The LCN 8310-859 handheld remote is the tool used to program the 8310-877 Header Mount Safety Sensor or the 8310-854 Header Mount Motion Sensor, and sensor programming remotes are matched to the sensor they configure. The other electronic door hardware accessories carried alongside it serve different functions entirely: the DynaLock 6451-36 exit sensor bar for a 36 inch door, the DynaLock 7551 proximity card and 7561 proximity tag, and the Dortronics 6510/COV anti-tamper alarm cover for 6500 Series pull stations and 5000 Series push buttons. None of those configure an LCN header sensor.
4) I want touchless or hands-free egress but do not want to program a header sensor. What else can trigger the door?
The DynaLock 6451-36 exit sensor bar is an exit sensor for a 36 inch door, and it is sized to the door leaf rather than mounted in the header. Credential-based release is another route: the DynaLock 7551 proximity card and the DynaLock 7561 proximity tag present to a reader instead of a sensor field. The LCN 8310-859 remote applies only where an LCN 8310-877 or 8310-854 header-mounted sensor is the trigger and its detection parameters need to be set.
5) Is the LCN 8310-859 a one-time install tool or something I keep on the service truck?
Keep it. The 8310-859 is a handheld remote, not a consumable install part, so one unit programs as many 8310-877 and 8310-854 header sensors as you own. For a service contractor or an in-house maintenance crew running LCN touchless openings across a portfolio, one remote per tech covers the fleet, and you will want it again any time detection settings need re-tuning after a traffic pattern or door swing change.
6) I need to change the detection field on an LCN header sensor already installed above the door. What do I order?
Order the LCN 8310-859 handheld remote. Motion and safety detection parameters on the 8310-877 and 8310-854 header mount sensors are set through this remote rather than by dip switch or pot on a live door, so a tech adjusting an installed opening needs the remote in hand at the door. The sensor itself stays where it is; only the settings change.
7) Can I use another brand's programming remote or a generic access control accessory instead of the LCN 8310-859?
No. Sensor programming remotes are brand and model specific, and the 8310-859 pairs with LCN's 8310-877 and 8310-854 header sensors. Other access control accessories ZenSupply carries in this category solve different problems entirely, not sensor setup: Command Access field REX kits like the REX-KIT-ML add request-to-exit switching to a mortise lock, the RCI 914 Series is a delayed egress sounder, and the Dortronics 6510/COV is an anti-tamper cover for pull stations. None of them configure an LCN sensor.
8) Which accessories look like alternatives to a sensor programming remote but are actually switch kits or power parts?
Several items sit near touchless and electronic access work without configuring anything. The Command Access REX-KIT-ML is a request to exit kit for ML1-Series mortise locks, the CRSREXKIT-ED is a field installable request to exit kit for Cal Royal 22/98 and Sargent 80 Series with an SPDT switch, the CYREXKIT-ED is a field REX kit for Corbin 5000 and Yale 7000 exit devices rated 5A, and the SCHLBMKIT-ML is a latchbolt monitor switch kit for Schlage L9000 mortise locks in an SPDT configuration. On the power side, the Adams Rite 4605 is a regular transformer taking 115 VAC to 12/24 VAC with a 40 volt-amp output. These are hardwired signal and power components; the LCN 8310-859 is the handheld remote that sets up an 8310-877 or 8310-854 header sensor.
9) My touchless opening is on an all-glass or aluminum storefront entrance. What accessories are made for that opening?
Securitron Glass Door Accessories are the Glass Door Series parts intended for glass entrances, and the Securitron SAM Surface Mount Kit accessories along with the SWB SAM wood bracket cover surface-mount bracketry. For a header sensor on that kind of entrance, the LCN 8310-859 remote is what sets the detection parameters on an 8310-877 safety sensor or 8310-854 motion sensor once the sensor is in the header.
10) Do I need the programming remote if I only want an audible alert or a door position signal at the opening?
No. Audible and signaling functions come from dedicated devices: the RCI 914 Series delayed egress sounder has field-selectable volume output up to 102dB, and the Adams Rite 29-0218 is a piezo electric horn with multi-voltage compatibility. For running wire through a mortise lock, the RCI 9500/9501 Series mortise pin transfer is a tamper-resistant transfer rated 1.5A at 24VAC. The LCN 8310-859 handheld remote is only needed when an 8310-877 or 8310-854 header sensor has to be configured.
11) Is the LCN 8310-859 remote rated for commercial use, and does it meet ADA requirements?
Commercial, and listed as ADA compliant. The 8310-859 is an electronic accessory for commercial door hardware, and it sets up the sensors on touchless low energy openings used in healthcare, education, government and other public facilities where accessible entry is required.
12) Is the LCN 8310-859 a commercial-duty tool, and what comparable accessories carry a stated grade?
The LCN 8310-859 handheld remote is designated for commercial use and is ADA compliant. Among comparable electronic access accessories, the HES 1000-102 rain guard for 1006 Series strikes in rain or high dust areas carries a Grade 1 designation, and Securitron Glass Door Accessories carry a Grade 2 designation. Grades on those parts describe the strike and glass door hardware they belong to, not a programming tool.
13) I am building out the electrical side of a touchless entrance. Which parts handle power and relay logic instead of sensor setup?
The Adams Rite 4605 regular transformer converts 115 VAC to 12/24 VAC with a 40 volt-amp output, and the Locknetics RDB4 is a 4 output relay distribution board. For enclosure work, the Cal-Royal 8641-SM is a single gang surface mount box in the 8600 Series. The LCN 8310-859 remote sits on the configuration side, used to program the 8310-877 safety sensor or 8310-854 motion sensor once power is in place.
How fast can I get the LCN 8310-859 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the LCN 8310-859 come with a warranty?
Absolutely. The LCN 8310-859 is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the LCN 8310-859?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the LCN 8310-859 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!