Lead Adapters, 20-Foot
69358 - spec sheet
Features
- One side of cable has standard Banana Jack type inputs to attach to the meter, the other side has a smaller diameter connectors to attach alligator clips, outlet tabs/prongs, or additional cables
- Leads are 20-Foot (610 cm) long
- The 20-Foot Lead Adapters are perfect for setting up connections for a remote ground for the ET450 to optimize signal strength
- For use with the Advanced Circuit Tracer Kit (Cat. No. ET450) or any brand of meter with banana-type connectors
- Comes with protective caps for connectors
- Compatible with any Brand of Meter with Banana-Type Connectors
- The cable can be used as an extension on a meter with Banana Jack inputs
- CAT III 1000V/CAT IV 600V safety rating, double insulated
Warnings
- Before each use, verify tester operation by testing on a known live and correctly wired receptacle and circuit.
- Use personal protective equipment to prevent shock and arc blast injury where hazardous live conductors are exposed.
- Read, understand, and follow all warnings and instructions before operating testers.
69358 - spec sheet
Manufacturer Resources
Product Specs
- Connector Type:
- Banana Plug
- Depth:
- 7.8700 in
- For Use With:
- Cat. No. ET450 Electrical Test Kit and any Model with Standard Banana-type Inputs
- Height:
- 1.6700 in
- Material:
- PVC and Berillium Copper
- Overall Height:
- 0.31" (0.8 cm)
- Overall Length:
- 245" (622.3 cm)
- Overall Width:
- 0.31" (0.8 cm)
- Type:
- Lead Adapter
- Weight:
- 0.3900 lbs
- Width:
- 5.9100 in