You may also like
LENOX - Recips 618R 6 X3/4X
Features
- Exceptional value
- Shatter resistant, bi-metal design provides the flexibility and durability single-metal blades can't
- Patented tooth design provides long blade life
- Optimized for specific applications, efficient cutting
Manufacturer Resources
Product Specs
- Battery Included:
- No
- Net Lit Ion Y N:
- No
- Power Source:
- NON-ENERGY USING
- Product Group:
- Power Tools & Accessories
- Product Length:
- 1.9 in
- Product Height:
- 8.1 in
- Product Weight:
- 0.19 lbs
- Product Width:
- 0.5 in
- Product Type:
- Reciprocating Saw Blade
- Department:
- Electrical
- Product Subgroup:
- Saw Blades
- Country Of Origin:
- United States
Lenox ES20566618R – Frequently Asked Questions
1) What does the 618R designation on this Lenox reciprocating saw blade mean?
618R is Lenox's shorthand for the blade's cutting geometry: a 6 inch blade at 18 teeth per inch, and the catalogue description carries it as "Recips 618R 6 X3/4X" with 3/4 inch blade width. The fine 18 TPI pitch is the pitch you reach for on thin-wall metal, conduit, EMT, threaded rod and metal studs, where a coarse pitch would strip teeth instead of cutting. Order it as MPN ES20566618R.
2) Is an 18 TPI bi-metal recip blade the right choice for cutting EMT and threaded rod, or should I use a coarser blade?
For electrical work, 18 TPI is the pitch you want. The rule of thumb is at least three teeth in the material at all times, so thin-wall conduit, strut, threaded rod and light angle need a fine pitch like this one. Go coarser (10 to 14 TPI) only for thicker steel or for wood and nail-embedded demolition work, where a fine pitch loads up and cuts slowly. The 618R is a bi-metal blade, so the hardened tooth tips survive metal while the body flexes instead of snapping.
3) Why choose a bi-metal recip blade over a cheaper carbon steel one for MRO work?
Carbon steel blades are a single hardness throughout, so they either flex and dull fast or stay hard and snap. The 618R is bi-metal: hard tooth edge welded to a flexible backing, which is what lets it take a bend in a tight stud bay without shattering, and the patented tooth form is what carries blade life. For maintenance crews cutting mixed material in awkward positions, that is the difference between one blade and five.
4) How much does one Lenox 618R recip blade weigh for shipping or kit packing?
Each 618R blade is listed at 0.19 lbs, with pack dimensions of 8.1 in, 1.9 in and 0.5 in. Light enough that a van stock of several dozen adds almost nothing to a truck load, which matters if you are standardizing a fleet of service vehicles on one blade.
How fast can I get the Lenox ES20566618R delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Lenox ES20566618R come with a warranty?
Absolutely. The Lenox ES20566618R is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Lenox ES20566618R?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Lenox ES20566618R from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.