Lenox 20567S618R 18TPI Metalwo...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$3.84
Lenox 20567S618R 18TPI Metalwolf Wave-Edge Reciprocating Saw Blade

Lenox 20567S618R 18TPI Metalwolf Wave-Edge Reciprocating Saw Blade

(No reviews yet) Write a Review

Model: 20567S618R

In Stock (leaves warehouse same day if ordered before 3pm ET)

$3.84
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like

Lenox 20567S618R 6" 18TPI Metalwolf Wave-Edge Reciprocating Saw Blade for Metal Cutting

This Lenox reciprocating saw blade is a 6" blade from the Metalwolf Wave Edge line, engineered with an 18TPI (teeth-per-inch) tooth pattern for controlled, efficient cutting on demanding jobsite tasks. Built for professional trade use, this blade pairs Lenox's Metalwolf design with a wave-edge tooth geometry sized specifically for metal-focused cutting applications. The 6" blade length and 18TPI configuration make it a practical, easy-to-source choice for technicians and contractors who need a dependable reciprocating blade in their toolkit for everyday jobsite demands. Stocked for fast fulfillment, this blade is well suited for technicians who rely on a consistent supply of Metalwolf Wave Edge blades for their reciprocating saw work, whether tackling routine maintenance or heavier-duty cutting tasks blade after blade.

Key Features

  • Trade Size: 6" blade length sized for standard reciprocating saw applications and typical cutting depths encountered on the jobsite.
  • Tooth Configuration: 18TPI (teeth per inch) pattern engineered for controlled, precise cutting performance across a range of cutting tasks.
  • Wave Edge Design: Wave-edge tooth geometry from the Metalwolf line, built to hold up under repeated, demanding use without losing cutting consistency.
  • Metalwolf Series: Part of Lenox's Metalwolf reciprocating blade lineup, purpose-built for metal-focused cutting applications on professional jobsites.
  • Reciprocating Saw Compatibility: Designed to fit standard reciprocating saws used across construction, maintenance, and repair trades.
  • Consistent Cutting Performance: The combination of 18TPI and wave-edge geometry is engineered to deliver repeatable, controlled cuts blade after blade.

Technical Specifications

  • Configuration: 18 TPI Wave Edge
  • Product Size: 6"

Typical Applications

  • Metal-Cutting Applications
  • Demolition and Renovation Work
  • Plumbing and HVAC Trade Tasks
  • Professional Jobsite and MRO Use
  • General Reciprocating Saw Cutting Tasks
  • Maintenance and Repair Projects

Why Lenox?

Lenox built the Metalwolf Wave Edge line to give professional trade workers a dependable 6" reciprocating blade with an 18TPI tooth pattern suited to controlled, repeatable metal-cutting performance. The wave-edge design reflects Lenox's focus on blade geometry that holds up to demanding, everyday jobsite use. Crews standardizing on the Metalwolf platform get a consistent tooth pattern and blade geometry they can count on, shipment after shipment. For contractors and technicians who need a trusted reciprocating saw blade, the Lenox Metalwolf Wave Edge blade delivers the fit, form, and cutting performance professionals expect from Lenox.

Manufacturer Resources

Product Specs

Product Type:
Reciprocating Saw Blade
Series:
Metalwolf
Configuration:
18 TPI Wave Edge
Department:
Electrical
Product Subgroup:
Saw Blades
list_batch:
LEN-20260922
Country Of Origin:
United States
Product Group:
Power Tools & Accessories

Lenox 20567S618R – Frequently Asked Questions

1) What lengths does the Lenox Metalwolf Wave Edge 18 TPI reciprocating blade come in?
Two lengths: 6 inch (MPN 20567S618R) and 9 inch (MPN 24907T9118R). Both carry the same 18 TPI wave edge tooth pattern, so the only decision is reach. The 6 inch handles tight work in panels, boxes and between studs; the 9 inch gets you through larger pipe and lets the blade clear deeper material without the shoe fouling the cut.
2) Is 18 TPI the right tooth count for cutting metal conduit and pipe?
Yes. The Metalwolf blade is an 18 TPI wave edge, and that is the general-purpose metal count: fine enough to keep at least three teeth engaged in thinner wall material like EMT, strut and sheet, so the teeth don't strip or grab. For thick solid stock a coarser count cuts faster, and for very thin sheet a finer count leaves a cleaner edge, but 18 TPI covers most electrical, plumbing and HVAC metal cutting on a jobsite.
3) Will the Lenox Metalwolf blade fit my Milwaukee or DeWalt reciprocating saw?
It uses the standard reciprocating saw shank, so it drops into any common tool-free or set-screw blade clamp across the trade brands. No adapter needed. Pick the length by reach, not by tool.
4) Can I use an 18 TPI Metalwolf blade for demolition work with nails in wood?
It will cut nail-embedded material, but 18 TPI is a metal-cutting count and it will be slow in wood. The blade is built for metal-focused cutting plus demolition and renovation tasks where you are going through metal. For framing lumber or heavy teardown, use a coarse demolition blade in the 6 to 10 TPI range and keep the Metalwolf for the conduit, pipe, strut and fasteners.
5) Are Lenox Metalwolf reciprocating blades made in the USA?
Yes, country of origin on the Metalwolf Wave Edge blades is the USA. That matters if you are filling a government, institutional or Buy American spec where domestic origin has to be documented on consumables as well as equipment.
6) I need to standardize blades across my maintenance crews. Does this cover both lengths with one tooth pattern?
That is exactly what the Metalwolf Wave Edge 18 TPI line lets you do. Both the 6 inch and the 9 inch run the same 18 TPI wave edge geometry, so stocking the pair gives your techs one cutting behavior to learn and one reorder pattern, with the only variable being blade reach. Order by MPN: 20567S618R for 6 inch, 24907T9118R for 9 inch.
7) What does the wave edge on the Metalwolf blade actually do for me?
The wave edge is the tooth geometry Lenox uses on the Metalwolf line: the set runs in a wave rather than a straight alternating pattern, which keeps the kerf cutting cleanly and holds cutting consistency through repeated use instead of dulling to a polish after a few cuts. In practice that means fewer blade changes when a crew is cutting metal all day.
How fast can I get the Lenox 20567S618R delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Lenox 20567S618R come with a warranty?
Absolutely. The Lenox 20567S618R is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Lenox 20567S618R?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Lenox 20567S618R from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!