You may also like
LFMC EMCSTDUL 1/2IN BLK 300M/1000FT
Manufacturer Resources
Product Specs
- Number Of Batteries:
- 0
- Product Net Depth Length:
- 1,000 ft300 m
- Product Type:
- Liquid Tight Flexible Metallic Conduit
- Department:
- Electrical
- Product Color:
- Black
- Product Material:
- Galvanized Steel Core with Tin Copper Braid
Thomas & Betts LTEUS02B-L – Frequently Asked Questions
1) What size and length is the Thomas & Betts LTEUS02B-L liquid tight flexible metallic conduit?
The LTEUS02B-L is 1/2 inch trade size liquid tight flexible metallic conduit supplied on a single 1,000 ft (300 m) reel. That is a bulk put-up, not a cut length, so it suits a contractor wiring a run of motor connections, rooftop units or pump skids rather than a one-off whip.
2) What is the LTEUS02B-L conduit made of, and does it provide a ground path?
Construction is a galvanized steel core with a tin copper braid under a black jacket. The steel core gives the crush resistance and the copper braid is what makes this an EMC (shielded) type rather than plain LFMC, so it is built for runs where electrical noise matters, such as VFD motor leads.
3) Do I get fittings with the Thomas & Betts LTEUS02B-L reel, or do I order them separately?
The reel is conduit only. Liquid tight connectors are ordered separately, and they have to be 1/2 inch liquid tight fittings to match the trade size. If the braid is being used for shielding continuity, specify fittings rated to terminate the braid rather than a plain sealing-gland type.
4) Is this the right conduit for a variable frequency drive motor cable run?
Yes, that is the case for the braided version. The tin copper braid over the galvanized steel core gives this 1/2 inch conduit the shielding an unbraided liquid tight flexible metal conduit does not have, which is why EMC types get specified on VFD and drive feeder runs. For an ordinary wet-location motor whip with no noise concern, standard non-shielded LFMC is the cheaper choice.
5) Can I use this 1/2 inch liquid tight conduit outdoors or in a wet area?
Liquid tight flexible metallic conduit is made for exactly that: wet locations, washdown areas, rooftop equipment and anywhere the raceway has to flex and still keep water out. The black jacket over the steel core is the sealing element, so the run only stays liquid tight if every termination uses a proper liquid tight connector and the jacket is not nicked during pulling.
6) How do I identify this part when matching what is already installed on the job?
Order by the Thomas and Betts manufacturer part number LTEUS02B-L. That designation is the black 1/2 inch EMC braided liquid tight flexible metallic conduit in the 1,000 ft reel. If the existing raceway on site is unbraided, the LTEUS02B-L will terminate the same way but adds the copper braid.
How fast can I get the Thomas & Betts LTEUS02B-L delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Thomas & Betts LTEUS02B-L come with a warranty?
Absolutely. The Thomas & Betts LTEUS02B-L is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Thomas & Betts LTEUS02B-L?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Thomas & Betts LTEUS02B-L from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.