Thomas & Betts LTGES11B-A LFMC GP 4IN BLK 8M/25FT

The LTGES11B-A ships as conduit only, a 25 ft (8 m) coil. Liquidtight fittings, sealing rings and any grounding accessories are separate line items, and they have to match the trade size of the conduit at both ends of the run. Budget two connectors per length at minimum.

Each coil of the LTGES11B-A runs 25 ft (8 m). If a run needs more than that, order multiple coils and plan your couplings, since the coil is a fixed length and not cut to order.

Galvanised steel core with a black jacket. That is the standard LFMC build: an interlocked steel strip for physical protection, sheathed in a liquid tight outer covering. It is a metallic conduit, not a non-metallic (LFNC) whip, so it behaves differently mechanically than a plastic liquidtight.

Metallic liquidtight, which is what the LTGES11B-A is, uses a galvanised steel core and is the usual pick where the whip can take a knock, get stepped on, or sit where physical damage is a real risk, such as motor connections, pumps and rooftop equipment. Non-metallic liquidtight is lighter and easier to pull through tight bends but gives up that steel armor. If the run needs crush resistance, go metallic.

The black outer jacket on this Thomas & Betts LFMC is the liquid tight sheath that keeps moisture off the steel core, which is why this type is specified for damp and wet equipment connections. Confirm your jurisdiction's rules for the specific location and be sure the fittings you pair with it are liquidtight rated too, since an unlisted connector defeats the seal at the box.

Order by MPN LTGES11B-A from Thomas & Betts. That is the black, galvanised steel liquid tight flexible metallic conduit supplied in a 25 ft (8 m) coil, so quoting the number gets you the identical coil for matching existing runs in a facility.