Thomas & Betts LTZES13G-A LFMC HLFR 6IN GRY 8M/25FT

The LTZES13G-A is liquid tight flexible metallic conduit (LFMC) built on a galvanized steel core with a grey jacket. The steel core is what gives it crush resistance and a metallic raceway path, while the jacket keeps liquids out, so it's the type you reach for on wet-location whips and equipment connections rather than a plain plastic flex.

Each coil of LTZES13G-A runs 25 ft (8 m). If you're cutting multiple equipment whips off one coil, figure your total footage plus waste before ordering, since it ships as a fixed-length coil rather than cut to order.

Metallic is the choice where the run takes physical abuse or where you want the steel core in the raceway. The LTZES13G-A uses a galvanized steel core under a liquid tight jacket, so it stands up to being stepped on, dragged, or vibrated at a motor or condensing unit better than a nonmetallic liquid tight, which is lighter and easier to bend but gives no steel protection. Pull a separate equipment ground either way unless your fitting and conduit assembly is listed for grounding.

The LTZES13G-A is grey. Grey LFMC is the common general-purpose color on commercial and industrial work; if your spec or facility standard calls out a different jacket color for identification (orange or blue for isolated systems, for example), this one won't match that convention. The color is jacket only, the core is galvanized steel either way.

Order Thomas & Betts LTZES13G-A. That's the manufacturer part number for the grey liquid tight flexible metallic conduit supplied as a 25 ft (8 m) coil, and it's the number to put on a purchase order or match against a submittal.