Thomas & Betts LTBUS06Y-B LFMC...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$93.45
$50.64

Thomas & Betts LTBUS06Y-B LFMC SPLP UL 1-1/2IN YLW 15M/50FT

(No reviews yet) Write a Review

Model: LTBUS06Y-B
Selected Model is

In Stock (leaves warehouse same day if ordered before 3pm ET)

$93.45
$50.64
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
LFMC SPLP UL 1-1/2IN YLW 15M/50FT

Manufacturer Resources

Product Specs

Number Of Batteries:
0
Product Net Depth Length:
50 ft15 m
Product Type:
Liquid Tight Flexible Metallic Conduit
Department:
Electrical
Product Color:
Yellow
Product Material:
Galvanized Steel Core

Thomas & Betts LTBUS06Y-B – Frequently Asked Questions

1) What size conduit is the Thomas & Betts LTBUS06Y-B, and how much comes in a roll?
It's 1-1/2 inch trade size liquid tight flexible metallic conduit, supplied in a 50 foot (15 m) coil. One roll is one continuous length, so plan your runs against that 50 feet rather than assuming you can splice mid-pull.
2) Can I use this 1-1/2 inch liquidtight for an outdoor rooftop HVAC unit connection?
That's the normal use for it. Liquid tight flexible metallic conduit is the wiring method for wet locations and for equipment that vibrates or needs a bit of movement, which is exactly a rooftop condenser, pump, or motor whip. The plastic jacket sheds water and the steel core takes the abuse. You'll need liquidtight connectors at each end, sold separately, in the matching 1-1/2 inch trade size.
3) Why is this liquidtight conduit yellow instead of the usual gray?
Yellow jacket on the LTBUS06Y-B is a color-code choice, not a different construction. Crews use colored liquidtight to distinguish circuits or systems at a glance, for example separating emergency, control, or a particular voltage class from the standard gray runs. The core is the same galvanized steel.
4) Does liquidtight flexible metallic conduit give me an equipment ground, or do I still pull a ground wire?
The LTBUS06Y-B is built on a galvanized steel core, which is what makes it a metallic wiring method rather than a plastic one. Standard practice on LFMC is to pull a separate equipment grounding conductor inside and land it at both ends, and to use listed liquidtight fittings so the connection at the box is sealed and bonded. Size the ground for the overcurrent device on the circuit.
5) Is 1-1/2 inch liquidtight the right size, or should I step down to 1 inch or 1-1/4?
Size off your conductor fill, not off the equipment opening. At 1-1/2 inch the LTBUS06Y-B is toward the large end of the liquidtight range and is normally used for feeder-size conductors or multi-conductor motor feeds. For a small motor whip or a few control conductors, a smaller trade size bends easier, costs less to terminate, and is usually the better call. Going oversize also means a stiffer bend radius in tight equipment spaces.
6) Will this metallic liquidtight work where I'd otherwise use the nonmetallic gray flex?
Not interchangeably. The LTBUS06Y-B has a galvanized steel core, so it resists crushing and physical damage in a way liquidtight nonmetallic (LFNC) does not, and it behaves as a metallic raceway. LFNC is lighter and easier to route but is limited in where it can be run and in length in some applications. If your drawing or inspector calls out LFMC, the steel core version is what you need.
7) What's the exact part number for the 1-1/2 inch yellow Thomas & Betts liquidtight?
Thomas & Betts LTBUS06Y-B. The -B suffix denotes the boxed 50 foot coil, and the Y in the number is the yellow jacket.
How fast can I get the Thomas & Betts LTBUS06Y-B delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Thomas & Betts LTBUS06Y-B come with a warranty?
Absolutely. The Thomas & Betts LTBUS06Y-B is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Thomas & Betts LTBUS06Y-B?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Thomas & Betts LTBUS06Y-B from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.