You may also like
IDEAL Industries 31-473 Line Package, 1/2" x 150', 10-Pack Bag
Model: IDL-31-473
Line Package, 1/2" x 150', 10-Pack Bag
Features
Line tensile strength of 17 lbs.
One-piece pull line and foam tip unwind as they move through conduit
One-piece construction for faster, easier use...
Ideal Industries
$872.00
$725.00
Line Package, 1/2" x 75', 10-Pack Bag
Features
- For use with any type of blower or vacuum system
- One-piece construction for faster, easier use with no knots or foam carriers to retrieve
- Line tensile strength of 17 lbs.
- One-piece pull line and foam tip unwind as they move through conduit
Manufacturer Resources
Product Specs
- Product Group:
- Switches
- Department:
- Electrical
- Product Subgroup:
- Switches & Receptacles
Ideal Industries 31-472 – Frequently Asked Questions
1) What is the IDEAL 31-472 line package used for in conduit work?
It's a pull line with a foam tip used to blow or vacuum a line through empty conduit before you pull your rope and cable. The foam tip catches the airflow and carries the line down the run. IDEAL builds it as one piece, so the line and tip unwind together as they travel, which means no knots to tie and no foam carrier to fish back out on the far end.
2) How many lines and what length do you get in the IDEAL 31-472 bag?
The 31-472 ships as a 10-pack bag, each line 1/2 inch by 75 feet. That gives you ten separate 75-foot shots, so it suits a job with a number of short to medium conduit runs rather than one long one. If your runs exceed 75 feet, you'll need a longer line package.
3) Does the IDEAL 31-472 work with my vacuum, or do I need a blower?
Either. The 31-472 is rated for use with any type of blower or vacuum system, so whichever direction you prefer to work the run, it will carry. Vacuum from the far end or blow from the near end, same product.
4) Is the 1/2 inch size of the IDEAL 31-472 the conduit size or the foam tip?
The 1/2 inch refers to the foam carrier, not a conduit trade size limit. The foam is what seals against the conduit wall to catch the air, so the size needs to suit the raceway you're blowing. Pick the tip diameter to match the run you're shooting.
5) Do I have to tie the foam carrier onto the line before shooting the IDEAL 31-472?
No prep needed. The 31-472 is one-piece construction, so the foam tip and the pull line come already joined and unwind together as they travel down the conduit. You pull one out of the bag, set it at the mouth of the pipe, and go. There's also nothing to recover at the far end beyond the line itself.
How fast can I get the Ideal Industries 31-472 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Ideal Industries 31-472 come with a warranty?
Absolutely. The Ideal Industries 31-472 is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Ideal Industries 31-472?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Ideal Industries 31-472 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.