You may also like
LOCKTITE CU 2HOLE LUG 1-2/0
Manufacturer Resources
Product Specs
- Country Of Origin:
- Mexico (MX)
- Product Group:
- Wire & Cable Management
- Product Type:
- Locktite Connectors
- Selling Unit Of Measure:
- each
- Standards:
- UL E9809
- Type2:
- Mechanical connectors
- Department:
- Electrical
- Product Subgroup:
- Connectors
- Product Material:
- Copper
Blackburn 32009 – Frequently Asked Questions
1) What wire sizes does the Blackburn 32009 two-hole lug take?
The Blackburn 32009 Locktite lug is sized for 1 AWG through 2/0 conductor. That range is part of the model's own designation, so a single 32009 covers the whole 1, 1/0, 2/0 span rather than needing a separate lug per size. Anything larger than 2/0 or smaller than 1 AWG needs a different lug.
2) Is the Blackburn 32009 lug copper only, or can I land aluminum conductor in it?
Copper. The 32009 is built of copper and is a CU-only lug, so it should be landed on copper conductor. For aluminum or mixed runs you need a lug rated AL9CU or dual-rated, not this one.
3) Is this a compression lug or a mechanical set-screw lug?
Mechanical. The Blackburn 32009 is a mechanical connector, so the conductor is clamped by the lug's own hardware and torqued down. No hydraulic crimper, die set, or press is needed on site, which is why these get used for field terminations and service changes where a crimp tool isn't practical.
4) Will the Blackburn 32009 bolt to a two-hole NEMA pad on a bus bar or breaker?
It is a two-hole lug, so it lands on a pad drilled for two bolts and resists rotation under fault or vibration the way a single-hole lug will not. Two-hole terminations are what most equipment manufacturers and utility specs call for on ground bars, switchgear pads, and generator connections. Confirm your pad's hole spacing matches before ordering.
5) Is the Blackburn 32009 lug UL listed?
Yes, it carries UL file E9809. That is the detail an inspector or an institutional spec reviewer will want on a service or grounding termination, and it is worth recording on the submittal.
6) Does the Blackburn 32009 come as a single lug or in a bag of several?
It sells as each, one lug per unit. If you are landing three phases plus a neutral and a ground you need to order the quantity yourself; there is no multi-pack assumption built into the unit of measure. Mounting bolts, nuts, and washers are supplied by the pad or the installer, not with the lug.
7) What part number should I give my distributor for this Blackburn lug?
Order it as Blackburn 32009. That MPN identifies the copper, two-hole, 1 to 2/0 Locktite mechanical lug specifically, which matters because Blackburn's numbering runs adjacent parts for different wire ranges and hole counts. Country of origin is Mexico if your job requires origin documentation.
How fast can I get the Blackburn 32009 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Blackburn 32009 come with a warranty?
Absolutely. The Blackburn 32009 is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Blackburn 32009?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Blackburn 32009 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.