You may also like
LOCKTITE CU 2WAY CNDTR 4-1
Manufacturer Resources
Product Specs
- Country Of Origin:
- Mexico (MX)
- Product Group:
- Wire & Cable Management
- Product Type:
- Locktite Connectors
- Selling Unit Of Measure:
- each
- Standards:
- UL E9809
- Type2:
- Mechanical connectors
- Department:
- Electrical
- Product Subgroup:
- Connectors
- Product Material:
- Copper
Blackburn 32507 – Frequently Asked Questions
1) What conductor sizes does the Blackburn 32507 Locktite connector take?
The Blackburn 32507 is a two-conductor Locktite mechanical connector rated for a 4 through 1 conductor range, so it handles #4, #3, #2 and #1 copper conductors in each of its two ports.
2) Can I use the Blackburn 32507 on aluminum conductors?
No. The 32507 is a copper-body connector built for copper conductors only. For aluminum or an AL/CU dual-rated splice you need a connector specifically marked for aluminum use, not this one.
3) Do I need a crimp tool or die set for the Blackburn 32507?
No crimping gear needed. It is a mechanical set-screw style connector, so the conductors are landed and torqued with a hex wrench or driver. That makes it workable in a box where you cannot fit a hydraulic crimper.
4) What is the part number and manufacturer for the LOCKTITE CU 2WAY 4-1 connector?
Blackburn catalog number 32507. That is the number to quote to a distributor; the 2WAY in the description means two conductor ports, and 4-1 is the copper conductor range.
5) Can I use a two-way connector like the Blackburn 32507 to tap a feeder for a subpanel?
Yes, that is the normal use. A two-port copper connector splices a run conductor to a tap conductor, both within the #4 to #1 copper range, inside a listed enclosure or box. If you need to land more than two conductors at one point, use a three or four port connector instead of doubling up in a two-way body.
6) Is the Blackburn 32507 sold as a single connector or in a box?
It is sold each, so one connector per unit. Order one per splice point, and remember a three-conductor feeder tap needs three of them, one per phase.
7) Where is the Blackburn 32507 connector made?
Manufactured in Mexico. Country of origin matters on public works and Buy American jobs, so check the project specification before you submit it.
How fast can I get the Blackburn 32507 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Blackburn 32507 come with a warranty?
Absolutely. The Blackburn 32507 is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Blackburn 32507?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Blackburn 32507 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.