You may also like
LPS 00616 Magnum Teflon 11oz Cans
Features:
- Excellent for heavy load applications
- PTFE additives improve performance
- Extends equipment life
- Displaces moisture
- Protects against rust and corrosion
- Does not contain chlorinated solvents
- Safe to use on most surfaces
- NSF H2 registered #128980 (aerosol); #128981 (bulk)
- Flash point of 175°F (79°C)
- Inverta spray valve
Specifications:
- 11 oz. (312 grams) aerosol
- Appearance/Physical State: Brown
- Boiling Point: 383°F (195°C)
- HMIS: 1, 2, 0
- Specific Gravity (water=1): 0.85 – 0.87 @ 20°C
- Flash Point (TCC): 175°F (79°C)
- Vapor Pressure: 630 kPa (25°C)
Applications:
- Bearings and valves
- Cables and linkages
- Dies, bits and fasteners
- Engines and electric motors
- Hoists, lifts and draglines
- Metal parts and hand tools
- Parts in storage
- Production and transportation equipment
- Pulleys and rollers
- Slides and tracks
Manufacturer Resources
Product Specs
- Container:
- Aerosol Spray
- Product Type:
- Liquid Lubricant
- Department:
- Door Hardware
- Product Group:
- Lubricants
- Product Subgroup:
- Liquid Lubricant
- Product Size:
- 11 oz
- Application:
- Mist Spray
- Physical Form:
- Clear, Colorless Liquid
LPS LPS00616 – Frequently Asked Questions
1) Is LPS Magnum Teflon safe to use around food processing equipment?
LPS 00616 Magnum Teflon is NSF H2 registered, registration #128980 for the aerosol and #128981 for the bulk version. H2 means it is cleared for use on equipment in food plants where there is no possibility of contact with food. It is not an H1 incidental-contact lubricant, so keep it off surfaces and parts that touch product.
2) What does the PTFE in LPS Magnum Teflon spray actually do for heavy loaded parts?
The PTFE (Teflon) additive plates out on the metal and carries load where a straight oil film would be squeezed out. That is why the 00616 is aimed at heavy load work: hoists, lifts and draglines, dies, bits and fasteners, pulleys and rollers, slides and tracks. It also displaces moisture and leaves a rust and corrosion barrier, so it does double duty on parts going into storage.
3) Can I spray this lubricant upside down to reach a fitting overhead?
Yes. The 11 oz Magnum Teflon can uses an Inverta spray valve, so it sprays inverted and holds a mist pattern when you are working overhead or up into a linkage. Output is a mist spray from an aerosol can.
4) Will LPS 00616 damage painted or plastic surfaces on the equipment I'm spraying?
Magnum Teflon is safe on most surfaces and contains no chlorinated solvents, which is the ingredient class that tends to attack paint, plastics and elastomers. On an unusual or sensitive plastic, spot test first. Note that the product dries to a brown film, so it will show on light finishes.
5) Is this aerosol flammable, and how should I store it on the truck?
Yes, treat it as flammable. The 00616 has a TCC flash point of 175 F (79 C), boils at 383 F (195 C), and the can carries an internal vapor pressure of 630 kPa at 25 C. HMIS rating is 1 health, 2 flammability, 0 reactivity. Keep the can out of direct sun and away from hot surfaces on the truck, and do not spray it into a live ignition source.
6) Can I use LPS Magnum Teflon on electric motors and bearings?
Yes, bearings and valves, engines and electric motors, and cables and linkages are all listed uses for the 00616. Because it displaces moisture, it is also used on production and transportation equipment that gets washed down or sits outdoors. For sealed, grease-packed bearings, it is a surface and external treatment, not a replacement for the packed grease.
7) Is this the right spray for door closers, hinges and exit device linkages in my buildings?
It works for that MRO use. Hinges, closer arms, panic device linkages and roller latches are all cables, linkages, slides and tracks type duty, which the 00616 is built for, and the PTFE film holds up under the repeated load of a high-traffic opening. Keep in mind it leaves a brown film, so on a visible lever or push bar finish, apply sparingly and wipe the overspray.
8) How much lubricant is actually in an LPS Magnum Teflon can?
Net fill is 11 oz (312 grams) of product per aerosol can. That is the single size the 00616 is packaged in; LPS also registers a bulk version of the same formula under NSF #128981 if you are filling a pump sprayer or dip tank instead.
9) What part number do I order for LPS Magnum Teflon in the 11 oz aerosol?
Order LPS model 00616, manufacturer part number 51100, UPC 092644511004. It ships as a single 11 oz aerosol can with the Inverta valve, and there is only one configuration, so there is no size or valve option to specify.
How fast can I get the LPS LPS00616 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the LPS LPS00616 come with a warranty?
Absolutely. The LPS LPS00616 is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the LPS LPS00616?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the LPS LPS00616 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.