Milwaukee Tool 3497-22 M12 FUE...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$405.71
$325.22
Milwaukee Tool 3497-22 M12 FUEL, 2-Tool Combo Kit

Milwaukee Tool 3497-22 M12 FUEL, 2-Tool Combo Kit

(No reviews yet) Write a Review

Model: 3497-22
Selected Model is

In Stock (leaves warehouse same day if ordered before 3pm ET)

$405.71
$325.22
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like
M12 FUEL, 2-Tool Combo Kit

  • Features

    • Most Compact Drill and Impact Driver for best access in tight spaces
    • Mechanical Clutch on Drill for consistency in driving a wide range of fasteners
    • Impact Driver includes 4-Mode Drive Control with dedicated self tapping screw mode
    • Fastest Drilling and Driving applications under load
    • Most Powerful Subcompact Hammer Drill
    • 1/2" All-Metal chuck for maximum durability, grip and bit retention
    • Fastest Subcompact Impact Driver
    • All-Metal Gearcase for ultimate durability
    • More work per charge with the M12 REDLITHIUM, XC4.0 battery pack
    • Warranty: 5 Year Tool, 3 Year XC Battery, 2 Year CP Battery
    • Part of the M12 System, featuring over 125+ Tools
    • Maximum Workspace Visibility through Tri-LED Work lights on the Impact Driver

Manufacturer Resources

Product Specs

Product Type:
Combo Kit
Department:
Electrical
Product Subgroup:
Power Tools
Country of Origin:
Mexico
Product Group:
Power Tools & Accessories

Milwaukee 3497-22 – Frequently Asked Questions

1) What tools come in the Milwaukee 3497-22 M12 FUEL combo kit?
The 3497-22 pairs an M12 FUEL subcompact hammer drill with an M12 FUEL impact driver. The hammer drill runs a 1/2 inch all-metal chuck and a mechanical clutch; the impact driver has 4-Mode Drive Control including a dedicated self-tapping screw mode. Power comes from M12 REDLITHIUM XC4.0 battery packs.
2) Will the drill in the 3497-22 kit hammer into masonry, or is it drill and drive only?
It's a hammer drill, described as the most powerful subcompact hammer drill in the M12 FUEL line, so it has a hammer mode in addition to drilling and driving. For an electrician setting anchors in block or brick for strap and box work, that's the difference between this kit and a plain drill/driver combo.
3) Are the batteries in the Milwaukee 3497-22 kit compatible with my other M12 tools?
Yes. The kit ships with M12 REDLITHIUM XC4.0 packs, and it's part of the M12 System covering over 125 tools, so the same batteries and charger run across the platform. If your crew is already on M12, these packs drop straight into the rest of your kit.
4) Is an M12 FUEL kit powerful enough for daily commercial work, or should I be looking at M18?
The 3497-22 is built around access, not raw size. Milwaukee calls these the most compact drill and impact driver in the line for work in tight spaces, with an all-metal gearcase and a 1/2 inch all-metal chuck for bit retention and durability. For panel work, device boxes, overhead drops, and MRO punch lists in occupied buildings, the compact envelope is the point. For sustained large-diameter hole saw or self-feed bit work, a full-size 18V platform is the better tool.
5) What does the 4-Mode Drive Control on the M12 FUEL impact driver actually do for me?
It gives the impact driver four selectable output modes, one of them dedicated to self-tapping screws. That mode matters on sheet metal and strut work, where full impact from the start walks or snaps a self-drilling screw before the point bites. The drill side handles fastener consistency differently, with a mechanical clutch for driving a range of fasteners.
6) What is the correct Milwaukee part number to order for this M12 FUEL 2-tool combo?
Order it as Milwaukee 3497-22. That number covers the M12 FUEL hammer drill and impact driver kit together with the XC4.0 REDLITHIUM packs; the -22 suffix is the kit configuration, not a bare tool.
7) Does the Milwaukee 3497-22 have a work light for working inside panels and ceilings?
The impact driver carries Tri-LED work lights, which throw light around the fastener instead of casting the bit's shadow onto it. That's the setup you want reaching into a panel can or above a ceiling grid where you have no other light on the fastener.
8) Can I use standard 1/4 inch hex bits in the impact driver and round-shank bits in the drill?
The drill accepts round and hex shanks through its 1/2 inch all-metal chuck, so twist bits, step bits, and small hole saws with a 1/2 inch or smaller shank all mount. The impact driver takes 1/4 inch hex shank bits and impact-rated sockets adapters, which is the standard collet on an impact driver.
How fast can I get the Milwaukee 3497-22 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Milwaukee 3497-22 come with a warranty?
Absolutely. The Milwaukee 3497-22 is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Milwaukee 3497-22?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Milwaukee 3497-22 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!