Milwaukee Tool 2904-22 M18 FUE...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$546.37
$432.26
Milwaukee Tool 2904-22 M18 FUEL, 1/2" Hammer Drill/Driver Kit

Milwaukee Tool 2904-22 M18 FUEL, 1/2" Hammer Drill/Driver Kit

(No reviews yet) Write a Review

Model: 2904-22
Selected Model is

In Stock (leaves warehouse same day if ordered before 3pm ET)

$546.37
$432.26
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like
M18 FUEL, 1/2" Hammer Drill/Driver Kit

  • Features

    • All-metal belt clip for portability
    • 1400 in-lbs of torque
    • Auto-Stop, Control Mode, Enhanced Safety
    • Mechanical Clutch for consistency in driving a wide range of fasteners
    • 1/2" all-metal chuck with carbide teeth for maximum durability, grip and bit retention
    • Most Powerful Hammer Drill
    • Unmatched Performance with the most runtime in class with the XC5.0Ah batteries
    • Hammer Drill Mode for Fast Drilling into Brick, Block or Concrete
    • Only 6.9" in length for access into tight spaces and reduced fatigue
    • Auto-Stop Feature to Protect from over-rotation in a bind-up for enhanced safety, equipped with a dedicated autostop light on foot of tool to indicate a protection event
    • Fastest Drilling and Driving applications under load
    • POWERSTATE, Brushless Motor delivers the power to complete the widest range of applications of any hammer drill driver
    • LED light for better visibility in low-light situations

Manufacturer Resources

Product Specs

Product Type:
Hammer Drill/Driver Kit
Department:
Electrical
Product Subgroup:
Power Tools
Country of Origin:
Vietnam
Product Width:
2.38 in
Product Length:
6.95 in
Product Group:
Power Tools & Accessories

Milwaukee 2904-22 – Frequently Asked Questions

1) Will the Milwaukee 2904-22 M18 FUEL hammer drill actually drill into concrete and brick, or is it just for wood and metal?
The 2904-22 has a dedicated hammer drill mode for drilling into brick, block or concrete, on top of standard drilling and driving. So it covers masonry anchor work as well as wood and metal. It puts out 1400 in-lbs of torque through a POWERSTATE brushless motor.
2) What size bits does the chuck on the Milwaukee 2904-22 take?
It is a 1/2 inch all-metal chuck with carbide teeth, so it accepts round and hex shank bits up to 1/2 inch, including large auger bits, hole saw arbors and self-feed bits. The carbide jaws are there for bit retention under high torque, which is where plastic-bodied chucks let go.
3) What keeps this drill from breaking my wrist if a bit binds in a hole?
The 2904-22 has an Auto-Stop feature that cuts the tool when it senses over-rotation in a bind-up, which is the situation that hurts people running large hole saws or auger bits. There is a dedicated auto-stop light on the foot of the tool so you know a protection event tripped rather than guessing the battery died.
4) Is the Milwaukee 2904-22 short enough to work between studs and inside cabinets?
It measures 6.9 inches in length, which is what lets it get into tight bays, cabinet interiors and between joists without an extension. That short head also cuts arm fatigue on overhead drilling.
5) Does the Milwaukee 2904-22 have a clutch for driving screws, or is it drill-only?
It has a mechanical clutch, so you can set a torque limit and drive a range of fasteners consistently without stripping heads or burying screws in soft material. Combined with hammer mode and straight drill mode, it is a three-mode tool.
6) Which battery gets the most runtime out of the M18 FUEL 2904 hammer drill?
Milwaukee rates the longest runtime in its class on the XC5.0Ah batteries. For a maintenance tech running masonry anchors all day, the XC pack is the one to pair with it; smaller compact packs will run the tool but you will swap more often.
7) Can I hang this drill off my belt or ladder while I work?
It comes with an all-metal belt clip, not a plastic one, so it will carry on a tool belt or pouch while you climb. Useful for anyone working off a ladder or lift who needs both hands free between holes.
8) Is there a work light on the Milwaukee 2904-22 for drilling in dark mechanical rooms?
There is an onboard LED light for low-light work, which matters in crawl spaces, panel closets and mechanical rooms where you are setting anchors away from any fixture.
How fast can I get the Milwaukee 2904-22 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Milwaukee 2904-22 come with a warranty?
Absolutely. The Milwaukee 2904-22 is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Milwaukee 2904-22?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Milwaukee 2904-22 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!