Milwaukee Tool 2679-22 M18, FO...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$3,893.54
$3,780.23
Milwaukee Tool 2679-22 M18, FORCE LOGIC, 600 MCM Crimper

Milwaukee Tool 2679-22 M18, FORCE LOGIC, 600 MCM Crimper

(No reviews yet) Write a Review

Model: 2679-22
Selected Model is

In Stock (leaves warehouse same day if ordered before 3pm ET)

$3,893.54
$3,780.23
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like
M18, FORCE LOGIC, 600 MCM Crimper

  • Features

    • Tool records & stores every crimp made. ONE-KEY, enabled for professional report building
    • Brushless motor delivers up to 4x longer life
    • PFM, (predictive force monitoring): delivers fastest crimp time in the industry
    • Compatible with all M18 batteries
    • PFM, (predictive force monitoring): ensures optimal pressure every time
    • LED light provides instant pressure verification
    • Designed for use in temperatures between 0-122 °F
    • Provides fasted crimp time in the industry
    • Receive instant pressure verification: green light delivers peace of mind
    • In-line design and 350° head rotation: easy access in the tightest panels
    • Proprietary jaw alignment system: holds connector for instant alignment
    • Weather protected electronics keep dirt, dust & moisture out
    • Hydraulic system is optimized for consistent performance from 0°F - 122°F

Manufacturer Resources

Product Specs

Product Type:
Crimping Tool
Department:
Electrical

Milwaukee 2679-22 – Frequently Asked Questions

1) What size conductors can the Milwaukee 2679-22 crimper handle?
The M18 FORCE LOGIC crimper is rated to 600 MCM, so it covers copper and aluminum connectors up through 600 MCM in the jaw range it is built for. For anything above that size you need a larger-capacity hydraulic crimper.
2) Can I use this crimper outdoors in cold weather or in a hot attic?
Milwaukee rates the M18 FORCE LOGIC 600 MCM crimper for use between 0 and 122 degrees F, and the hydraulic system is specifically optimized to hold consistent performance across that same 0 to 122 degree F range. Below freezing-point 0 F you are outside the rated window.
3) Will this crimper fit inside a crowded panel or gutter?
That is what the form factor is for. The 600 MCM FORCE LOGIC crimper uses an in-line body with 350 degree head rotation, so you can reach into tight panels and rotate the head to the connector instead of repositioning the cable.
4) How do I know a crimp actually hit full pressure on an inspected job?
Two ways on this tool. An LED gives instant pressure verification at the crimp, with a green light confirming the cycle reached pressure. Separately, the tool records and stores every crimp it makes and is ONE-KEY enabled, so you can pull that data off for a professional crimp report when an inspector or engineer wants documentation.
5) Does the 2679-22 come with batteries, or do I need to buy M18 packs separately?
The 2679-22 is the kit version of the M18 FORCE LOGIC 600 MCM crimper, and the tool runs on M18 batteries. It is compatible with all M18 batteries, so any M18 pack already in your fleet will run it.
6) What is PFM on the Milwaukee FORCE LOGIC crimper and does it actually change anything?
PFM is predictive force monitoring. Rather than running a fixed cycle, it monitors force through the crimp to hold pressure at the correct level on every connector, and it is what Milwaukee credits for the tool's crimp speed. Practical effect: fewer under-pressure crimps and less dwell time per termination on a long feeder pull.
7) Do I have to hold the connector in place while crimping with this tool?
No. The 600 MCM crimper has a proprietary jaw alignment system that holds the connector for you and aligns it, which matters when you are working one-handed overhead or reaching into a panel.
8) Is a brushless crimper worth it over a brushed hydraulic tool for daily production work?
For crews terminating every day, yes. The M18 FORCE LOGIC 600 MCM crimper uses a brushless motor Milwaukee rates for up to 4x longer life, and the electronics are weather protected against dirt, dust and moisture, which is the usual failure path on a tool that lives in a gang box on a jobsite.
9) What is the exact Milwaukee part number for the M18 600 MCM FORCE LOGIC crimper kit?
Order it as Milwaukee 2679-22. That is the M18 FORCE LOGIC 600 MCM crimper, a crimping tool. Distributors cross-referencing the pack will find it under UPC 045242339488.
How fast can I get the Milwaukee 2679-22 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Milwaukee 2679-22 come with a warranty?
Absolutely. The Milwaukee 2679-22 is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Milwaukee 2679-22?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Milwaukee 2679-22 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!