Metallics JMSHC512SS M5 x 12mm...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$50.44
$0.44
Image coming soon

Metallics JMSHC512SS M5 x 12mm Metric Cap Head Hex Cap Screws - 18-8 Stainless - Each

(No reviews yet) Write a Review

Model: JMSHC512SS

In Stock (leaves warehouse same day if ordered before 3pm ET)

$50.44
$0.44
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like
M5 x 12mm Metric Cap Head Hex Cap Screws - 18-8 Stainless - 100qty

  • Additional Notes

    • METRIC | Other sizes and quantities available by request

  • Features

    • They retain thier mechanical ard performance capabilities at higher than ambient temperatures.
    • Metric Class 12.9 socket cap screws are usually supplied with a plain, black finish
    • Socket head with Hex Drive
    • 18-8 Stainless Material
    • M5 Diameter, 12mm" Length

Manufacturer Resources

Product Specs

Minimum Purchase:
100 units
Arra Compliant:
C
Buy American Compliant:
C
Dimensional Standard:
ISO 4742
Division:
Electrical H1
Drive Type:
Hex
Fastener Head Height:
4.82 - 5 in.
Fastener Head Type:
Socket
Fastener Head Width:
8.28 - 8.72 in.
Fastener Length:
12mm
Grade:
12.9
Hardness:
Rockwell C39-44
Language Code:
EN
Neurspe:
https://ideadigitalasset.com/DAMRoot/Original/10035/11237_ID-SPE-v1-ID-SPE-v1-Socket_Head_Cap_Screw_Metric.pdf
Order Minimum Imperial:
100
Order Minimum Uom Imperial:
CT
Pack Type:
Jar
Product Group:
Fasteners
Product Height:
2.15 in
Product Length:
3 in
Product Weight:
0.78 lbs
Product Width:
3 in
Slot Depth:
2.5
Socket Size Across Corners:
4.58
Socket Size Across Flats:
4.020 - 4.084
Sub Division:
Electrical-E H2
Tensile Strength:
1220 N/mm2 minimum
Thread Pitch:
0.8
Wall Thickness:
1.9
Department:
Electrical
Product Subgroup:
Screws
Product Type:
Cap Screw
Type2:
Cap Screw
Series:
MSHC
Product Details:
Cap Screw
Product Material:
18-8 Stainless

Metallics JMSHC512SS – Frequently Asked Questions

1) What size hex key do I need to drive the Metallics JMSHC512SS M5 socket cap screw?
A 4mm hex key. The socket on this M5 cap screw measures 4.020 to 4.084 across the flats, so a standard 4mm metric Allen wrench or bit seats properly. An imperial 5/32 inch key is slightly undersize and will round the socket under torque, so stay with metric drivers.
2) Does the M5 x 12mm Metallics cap screw use coarse or fine metric thread?
Coarse. The thread pitch is 0.8mm, which is the standard M5 x 0.8 coarse thread, so it mates with any standard M5 coarse tapped hole or nut. If your equipment is tapped M5 x 0.5 fine, this screw will not thread in.
3) Is this M5 socket cap screw stainless, and will it hold up outdoors or in a wet location?
Material is 18-8 stainless steel, the austenitic 300-series grade used for general corrosion resistance. That makes it suitable for damp and outdoor electrical work such as enclosure and strut hardware where a plain steel screw would rust. For constant salt exposure, 316 stainless is the step up.
4) How is the Metallics JMSHC512SS sold, by the piece or by the box?
It ships as a jar of 100 pieces, which is the order minimum (100 count). The packed jar weighs 0.78 lbs. Metallics lists other sizes and quantities of the MSHC socket cap screw series on request.
5) How strong is the M5 x 12mm cap screw, and can I use it on a structural or high-load connection?
The screw is rated Grade 12.9 with a minimum tensile strength of 1220 N/mm2 and a hardness of Rockwell C39-44. That is the top of the standard metric strength classes, suited to machinery and equipment joints that are torqued to high preload. It is not a substitute for a structural bolt called out to a specific building-code specification unless the spec names Class 12.9.
6) Is the socket head low profile enough to sit in a counterbore, or do I need a flat head screw?
This is a socket head cap screw, meaning a cylindrical head with an internal hex that drops into a standard counterbore but still stands proud of the surface unless the counterbore is deep enough. If you need the fastener dead flush with the face of the part, a flat (countersunk) socket screw with a chamfered seat is the correct choice instead.
7) Do these Metallics cap screws meet Buy American or ARRA requirements on a federal job?
The MSHC metric socket cap screws are flagged compliant for both ARRA and Buy American in the manufacturer data, with country of origin listed as China. On a federally funded project, verify which clause your contract invokes, since origin and compliance flags are evaluated differently depending on the clause.
How fast can I get the Metallics JMSHC512SS delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Metallics JMSHC512SS come with a warranty?
Absolutely. The Metallics JMSHC512SS is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Metallics JMSHC512SS?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Metallics JMSHC512SS from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!