Klein Tools ET10 Magnetic Digi...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$86.51
$27.56
Klein Tools ET10 Magnetic Digital Pocket Thermometer

Klein Tools ET10 Magnetic Digital Pocket Thermometer

(No reviews yet) Write a Review

Model: ET10
Selected Model is

In Stock (leaves warehouse same day if ordered before 3pm ET)

$86.51
$27.56
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like
Magnetic Digital Pocket Thermometer

  • Features

    • 3 inch stainless steel probe with removable protective sheath that doubles as a handle
    • Max/Min, Hold and Average functions
    • Magnet to Hold Onto Air Vents; Max/Min, Hold, and Average Functions
    • User selectable Fahrenheit and Celsius temperature measurements
    • Range -40 to 572-degrees F (-40 to 300-degrees C)
    • Not a medical device; thermometer is NOT intended for use on people or animals.
    • Backlit display for easy viewing in low light
    • Auto-power off after 15 minutes conserves battery life
    • Lightweight, compact tool with pocket clip provides easy storage and quick access
    • Magnet inside base of probe to easily attach to vents

  • Warnings

    • Read, understand and and follow all instructions, cautions and warnings attached to and /or packed with all test and measurement devices before each use.
    • Thermometer is NOT intended for use on people or animals.


ET10 - spec sheet

Manufacturer Resources

Spec Sheet

Product Specs

Batteries:
2 x LR44
Display:
Digital
Overall Height:
0.97" (2.5 cm)
Overall Length:
6.5" (16.5 cm)
Overall Width:
1.25" (3.2 cm)
Range:
-40°F to 572°F (-40°C to 300°C)
Response Time:
3 Seconds
Department:
Electrical
Product Group:
Test & Measurement
Product Subgroup:
Environmental Meters
Product Type:
Digital Thermometer
Product Details:
Magnetic Digital Thermometer
Product Height:
6.5000 in
Product Material:
Stainless Steel Probe; FDA GRAS Compliant
Product Weight:
0.0870 lbs
Product Width:
0.9400 in
Product Depth:
1.0800 in
Country of Origin:
China

Klein Tools ET10 – Frequently Asked Questions

1) Can the Klein ET10 thermometer check supply and return air temps at a register for an HVAC delta-T reading?
That's what the magnet in the base of the probe is for. The ET10 sticks to a metal air vent or duct so it reads hands-free while you note supply and return temperatures. The 3 inch stainless probe reads in about 3 seconds, and Max/Min, Hold and Average functions let you capture the swing at each register instead of eyeballing a moving number.
2) What temperature range does the Klein ET10 pocket thermometer cover?
Minus 40 to 572 degrees F (minus 40 to 300 degrees C), switchable between Fahrenheit and Celsius. That covers refrigeration and freezer work at the low end and flue or hot water lines well up the scale. Accuracy is plus/minus 2 degrees C from minus 40 to minus 20 C, plus/minus 1.5 degrees C from 19 to 150 C, and plus/minus 3 degrees C above that, so the tightest readings fall right in the HVAC and domestic hot water band.
3) Can I use the Klein ET10 to take a body temperature or check a patient?
No. The ET10 is a tool thermometer and Klein states it is not a medical device and is not intended for use on people or animals. For facility or healthcare MRO work, keep it to air, surface and equipment temperatures only.
4) Is the Klein ET10 probe safe to stick in food for a kitchen or hospitality temperature check?
The probe is stainless steel and listed as FDA GRAS compliant, so the material itself is food contact rated. Just remember it is a tool thermometer, not a medical device, and it should not be used on people or animals.
5) What batteries does the Klein ET10 take and how long does it stay on?
It runs on two LR44 button cells, the common coin-style alkaline cell. Auto-power off kicks in after 15 minutes so it doesn't drain sitting in a pouch. Worth stocking a few spares if you're outfitting a crew.
6) Will the Klein ET10 thermometer fit in a shirt pocket with the probe covered?
It's built for that. Overall it measures 6.5 x 1.25 x 0.97 inches and weighs about 0.087 lb, with a pocket clip. The 3 inch stainless probe has a removable protective sheath that covers the tip for carry and then doubles as a handle when you're taking a reading.
7) Can you read the Klein ET10 display in a dark mechanical room or crawlspace?
Yes, the digital display is backlit for low light. That plus the magnet mount means you can park it on a duct in an unlit attic and still read it without holding a flashlight in your teeth.
8) What part number do I order for the Klein magnetic pocket thermometer?
Klein Tools ET10 is the full part number, sold as a single model with no finish or size options to specify.
How fast can I get the Klein Tools ET10 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Klein Tools ET10 come with a warranty?
Absolutely. The Klein Tools ET10 is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Klein Tools ET10?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Klein Tools ET10 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!