Marks USA EA195FEU Electric St...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$652.57
$326.49
Marks USA EA195FEU Electric Storeroom Clutched Lever Lockset, Electric Unlock, Fail-Secure, Request to Exit, Marks C Keyway, 2-3/4in Backset

Marks USA EA195FEU Electric Storeroom Clutched Lever Lockset — Fail-Secure, Electric Unlock, Request to Exit, Marks C Keyway, 2-3/4in Backset

(No reviews yet) Write a Review

Model: EA195FEU/26D
Selected Finish is

In Stock (leaves warehouse same day if ordered before 3pm ET)

$652.57
$326.49
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like

Marks USA EA195FEU Electric Storeroom Clutched Lever Lockset — Fail-Secure, Electric Unlock, Request to Exit

The Marks USA EA195FEU is a commercial-grade cylindrical electric storeroom clutched lever lockset engineered for demanding access control applications. Operating in the FEU (Electrically Unlocked / Fail-Secure) function, the outside lever remains locked until unlocked by key or electrical energization, while the inside lever always latches freely. Designed for 12VDC or 24VDC operation (24VDC standard, bridge rectifier supplied), this lockset features a 100% duty cycle, low operating current of 265 mA at 12VDC or 150 mA at 24VDC, and meets or exceeds ANSI/BHMA A156.13 Grade 1 standards. Compatible with door thicknesses of 1-5/8" to 1-7/8" and a standard 2-3/4" backset (optional 2-3/8", 3-3/4", or 5" available), the EA195FEU delivers a clean, secure installation ideal for stairwell doors, enterprise access control, and man-trap configurations.

Key Features

  • Fail-Secure Electric Unlock (FEU) Function: Outside lever remains locked until unlocked by key or electrical energization; latch operated by inside lever at all times — ideal for stairwell doors with fire alarm system integration.
  • Flexible Voltage Compatibility: Operates on 12VDC or 24VDC (24VDC standard); supplied with bridge rectifier for use with either AC or DC current, providing broad system compatibility.
  • Low Operating Current: Draws only 265 mA at 12VDC or 150 mA at 24VDC for cool running and energy-efficient performance in continuous-duty installations.
  • 100% Duty Cycle: Rated at 100% duty cycle, 3 watts, ensuring reliable continuous operation without overheating in high-demand access control environments.
  • Request to Exit (REX) Switch: Single pole, double throw, 3 amp, 125 VAC switch wired either normally open or normally closed for seamless integration with enterprise access control and man-trap systems.
  • Backset & Door Compatibility: Standard 2-3/4" backset with optional 2-3/8", 3-3/4", or 5" configurations; fits door thicknesses of 1-5/8" to 1-7/8" (use K1704 spacer for 1-3/8" doors).
  • Latch & Strike Specifications: Latch #1834 with 1-1/8" x 2-1/4" front, 9/16" throw, and stainless steel nose; Strike #1135, 4-7/8" ASA curved lip for secure latching.
  • Solid Cast Zamac Levers: American lever design in solid cast Zamac with 1/2" return; thru-bolted rose at 3-7/16" diameter with spring-loaded 2-#10 thru-bolts for robust, tamper-resistant mounting.
  • Marks C Keyway Cylinder: MARKS "C" keyway, 6-pin cylinder supplied with 2 keys for reliable keyed access control.
  • Labor-Saving Installation: Wiring directly through hinges eliminates the need to cut into cement-filled frames, offering significant time and labor savings over electric strike installations with a cleaner finished appearance.
  • Concealed Latch for Enhanced Security: Electrified cylindrical design conceals the latch keeper, providing greater security than electric strikes with exposed latch keepers.
  • Stainless Steel Retractor: Long-life stainless steel retractor in the cylindrical model ensures extended service life in high-traffic commercial applications.

Certifications & Compliance

  • Meets or Exceeds ANSI/BHMA A156.13 Grade 1
  • Commercial Grade — Grade 1

Technical Specifications

  • Product Group: Electric Locks
  • Product Subgroup: Panic Devices & Exit Alarms
  • Product Type: Cylindrical Electric Locks
  • Subcategory: Cylindrical Electric Locks
  • Commercial/Residential: Commercial
  • Lock Type: Cylindrical Electric Locks
  • Series: 195
  • Product Function: Electronically Unlocked
  • Product Category: Electric Locks
  • Department: Door Hardware
  • Lever Design Name: American
  • Grade: 1
  • Electrical Configuration: Electrified Lock, Request to Exit Switch

Typical Applications

  • Commercial Office Buildings with Access Control Systems
  • Stairwell Doors with Fire Alarm System Integration
  • Enterprise Access Control and Man-Trap Configurations
  • Healthcare Facility Secure Access Points
  • Educational Institution Controlled Entry Doors
  • Government and Municipal Secure Facilities
  • Industrial and Warehouse Controlled Access Areas

Why Marks USA EA195FEU?

Marks USA EA195FEU cylindrical electric locksets are built to ANSI/BHMA A156.13 Grade 1 standards, featuring solid cast Zamac levers, a long-life stainless steel retractor, and a 100% duty cycle solenoid rated at just 265 mA (12VDC) or 150 mA (24VDC) for cool, reliable continuous operation. Engineered for demanding commercial environments, the EA195FEU delivers a cleaner, more secure installation than electric strike alternatives — with concealed latch geometry and direct hinge wiring that saves significant time and labor on every installation.

Manufacturer Resources

Marks USA Product Catalog

Product Specs

Backset (Distance):
2-3/4"
Product Group:
Electric Locks
Product Subgroup:
Panic Devices & Exit Alarms
Product Type:
Cylindrical Electric Locks
Subcategory:
Cylindrical Electric Locks
Commercial/Residential:
Commercial
Lock Type:
Cylindrical Electric Locks
Series:
195 Series
Product Function:
Electronically Unlocked
Product Category:
Electric Locks
Department:
Door Hardware
Lever Design Name:
American
Grade:
Grade 1
Latch Throw:
9/16"
Electrical Configuration:
Electrified Lock, Request to Exit Switch

Marks USA EA195FEU/26D – Frequently Asked Questions

1) Will the Marks USA EA195FEU fit a 1-3/4 inch commercial door?
Yes. The EA195FEU cylindrical electric lockset covers door thicknesses from 1-5/8 to 1-7/8 inches, so the standard 1-3/4 inch commercial door is right in the middle of the range. For a thinner 1-3/8 inch door you need the K1704 spacer.
2) What happens to the EA195FEU when the power drops?
It locks. FEU is the fail-secure, electrically unlocked function: the outside lever stays locked until it is energized or a key is used, so a power loss leaves the outside secured. The inside lever always retracts the latch, so free egress is never affected by power state. That combination is why it gets specified on stairwell doors tied into fire alarm systems, where the door must release from the stair side on alarm but stay secure otherwise.
3) Does the EA195FEU run on 12V or 24V, and how much current does it pull?
Both. 24VDC is standard and it will also run at 12VDC. Draw is 150 mA at 24VDC or 265 mA at 12VDC, 3 watts, at 100 percent duty cycle so it can sit energized continuously without heating up. A bridge rectifier ships with the lock, so you can feed it AC or DC. Size your power supply off the 265 mA figure if you are running a 12V bus.
4) Does the EA195FEU include a request-to-exit signal for the access control panel?
Yes, a REX switch is built in. It is single pole double throw, rated 3 amps at 125 VAC, and can be wired normally open or normally closed to suit your panel. That is what lets the access control system shunt the door alarm on legitimate inside egress, and it is the reason this lock drops into man-trap and enterprise access control sequences without a separate motion sensor.
5) Will the EA195FEU latch into my existing ASA strike, or do I need to re-prep the frame?
It comes with the #1135 strike, a 4-7/8 inch ASA curved lip, which is the common commercial frame prep. Latch is the #1834 with a 1-1/8 by 2-1/4 inch front and a 9/16 inch throw, stainless steel nose. If your frame is already cut for a 4-7/8 inch ASA strike and a standard 1-1/8 by 2-1/4 face latch, it drops in. Check that your existing frame gap suits a 9/16 inch throw before reusing the old strike.
6) What backset does the EA195FEU come with, and can I get it for a wider stile or a narrow door?
Standard is a 2-3/4 inch backset, which is the usual commercial bore location. Optional 2-3/8, 3-3/4 and 5 inch backsets are available for doors bored closer to the edge or for wide stile and glass-lite openings where the bore sits further in. Measure from the door edge to the center of the cross bore before ordering.
7) Can I order the EA195FEU to take my own interchangeable core, or keyed to my existing Marks system?
Three cylinder choices are offered. Standard ships with a Marks C keyway 6-pin cylinder and two keys, which suits a facility already keyed to Marks C. The RF option accepts an interchangeable core if you are standardizing on IC across the building. G3 is less cylinder, which is what a locksmith orders when the core is being supplied from house stock. All three are offered in US26D satin chrome.
8) Is an electrified cylindrical lock better than an electric strike on a stairwell door?
Different trade-off. An electric strike puts the electrification in the frame, which on a cement-filled hollow metal frame means cutting and fishing wire through grout. The EA195FEU wires through the hinges instead, so the frame is left alone and the finished job looks cleaner. Security is also different: the strike leaves the keeper exposed, while this lockset conceals the latch inside the door. Where an electric strike still wins is when you need to keep existing mechanical lever hardware and only electrify the frame side.
9) Is the EA195FEU rated for high-traffic commercial use?
It is a Grade 1 lockset, meeting or exceeding ANSI/BHMA A156.13, which is the top commercial grade for mortise and bored locks and the level normally specified for schools, hospitals and government buildings. Build supports it: solid cast Zamac American-style levers with a 1/2 inch return, a stainless steel retractor, and a thru-bolted 3-7/16 inch rose held by two spring-loaded #10 thru-bolts.
10) What does the clutched lever on the EA195FEU actually do for me?
The clutch separates the outside lever from the retractor when the lock is secure, so the lever spins free instead of loading the internal mechanism. Someone yanking or hanging on the outside lever is turning nothing, which protects the retractor and keeps the door secure. On a storeroom function that matters, because the outside lever gets tried constantly and stays locked the vast majority of the time.
How fast can I get the Marks USA EA195FEU/26D delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Marks USA EA195FEU/26D come with a warranty?
Absolutely. The Marks USA EA195FEU/26D is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Marks USA EA195FEU/26D?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Marks USA EA195FEU/26D from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!