Midwest Fasteners Antique Copper Steel Phillips Oval Head Tapping Screws

Midwest Fasteners Antique Copper Steel Phillips Oval Head Tapping Screws

Midwest Fasteners Antique Copper Steel Phillips Oval Head Tapping Screws are decorative, self-threading fasteners built from steel and finished in antique copper, a dark coating that blends into cabinet hardware, trim, and other finish-grade work where a bright zinc or plain steel screw head would stand out. The oval head profile gives a countersunk, slightly domed appearance that reads as a finished fastener rather than a utility screw, and the Phillips drive keeps installation straightforward with common driver bits found on any jobsite or home shop. This family is available in two sizes, 6 x 5/8 and 8 x 3/4, so installers can match the screw to light cabinet hardware or slightly heavier trim and fixture mounting while keeping the same head style, drive, material, and finish across the project.

As a tapping screw family, these fasteners are designed to form or follow mating threads as they are driven, making them well suited to fastening into pre-drilled holes, existing tapped holes, sheet material, and other assemblies where a self-contained thread-cutting fastener is preferred over a separate bolt-and-nut connection. Because both available sizes share the same Phillips oval head configuration and antique copper finish, contractors and fabricators can stock a single family of hardware and simply select the size, 6 x 5/8 or 8 x 3/4, that fits the application at hand.

Key Features

• Size: Available in 6 x 5/8 and 8 x 3/4 to suit a range of cabinet hardware and trim mounting needs.
• Material & Finish: Steel construction with an Antique Copper coating for a decorative, aged-metal look that suits cabinetry, hardware, and trim work where appearance matters.
• Head Style: Phillips oval head for a finished, countersunk appearance in visible applications.
• Drive Type: Phillips drive for compatibility with standard screwdrivers and driver bits.
• Fastener Type: Tapping screw designed to cut or follow mating threads as it is driven into the workpiece.
• Country of Origin: Manufactured in Thailand.

Technical Specifications

• Refer to manufacturer documentation for complete technical specifications.

Typical Applications

• Cabinet hardware and furniture assembly where a decorative antique copper head finish is visible after installation.
• Trim, hinge, and hardware mounting on wood or metal surfaces where appearance matters as much as hold.
• General tapping screw applications where a self-threading fastener is preferred over separate bolts and nuts.
• Maintenance and repair work on fixtures and fittings finished in antique or aged metal tones.

Why Midwest Fasteners?

Midwest Fasteners supplies steel tapping screws with a consistent head configuration, drive type, and finish across both available sizes, 6 x 5/8 and 8 x 3/4, so contractors, fabricators, and maintenance techs can match hardware appearance across a project. The Phillips oval head and antique copper finish are built to the same specification every time, giving installers a dependable, repeatable fastener for finish-sensitive assembly and repair work regardless of which size in the family is selected.