Midwest Fasteners Class 4.8 Zinc Plated Steel Phillips Pan Head Machine Screws

Midwest Fasteners Class 4.8 Zinc Plated Steel Phillips Pan Head Machine Screws

Midwest Fasteners Class 4.8 Zinc Plated Steel Phillips Pan Head Machine Screws are built for equipment assembly, panel work, and general machine maintenance where a consistent, low-profile fastener is required. Each screw is manufactured from steel and finished with a zinc coating for improved corrosion resistance over bare steel, and every size in the lineup carries a Class 4.8 strength rating suited to standard machine screw duty. This family spans a wide range of metric and inch sizes — including 4mm-.70, 5mm-.80, and 6mm-1.0 diameters in lengths from 10mm to 80mm, plus #10-32 inch sizes in lengths from 1" to 1-1/2" — so you can match the screw to the tapped hole, nut, or threaded insert on your job. The pan head and Phillips drive combination delivers a clean, finished appearance along with solid driver engagement using a standard Phillips bit or screwdriver.

Key Features

• Size Range: metric diameters of 4mm-.70, 5mm-.80, and 6mm-1.0 in lengths from 10mm to 80mm, plus #10-32 inch sizes in lengths from 1" to 1-1/2", covering common tapped-hole and hardware-assembly needs.
• Material & Finish: Steel construction with a Zinc finish for improved corrosion resistance compared to uncoated steel.
• Head Type: Pan head profile offers a low, rounded, finished appearance suitable for general assembly work.
• Drive Type: Phillips drive for reliable engagement with a standard Phillips screwdriver or bit, reducing cam-out during installation.
• Grade: Class 4.8 strength rating, appropriate for standard machine screw duty in equipment and panel assembly.
• Type: Machine screw, designed to mate with a pre-tapped hole, nut, or threaded insert rather than cutting its own thread into the base material.

Technical Specifications

• Product Type: Machine Screw
• Product Finish: Zinc
• Grade: Class 4.8
• Product Material: Steel
• Head Type: Pan Head
• Drive Type: Phillips
• Available Sizes: 4mm-.70, 5mm-.80, 6mm-1.0, and #10-32, in lengths from 10mm to 80mm and 1" to 1-1/2"

Typical Applications

• Assembling and securing equipment panels, enclosures, and housings with pre-tapped holes.
• Fastening components into threaded inserts or weld nuts in machine and fabrication work.
• General maintenance and repair tasks requiring a steel machine screw with a finished pan head.
• OEM and MRO assembly where a Phillips-drive, zinc-finished machine screw is specified.

Why Midwest Fasteners?

Midwest Fasteners supplies steel machine screws with consistent sizing, a Class 4.8 strength rating, and a zinc finish built to hold up across routine maintenance and assembly work. The Phillips pan head configuration is a standard choice for techs and fabricators who need predictable driver engagement and a clean finished look on repetitive assembly jobs, across the full metric and inch size range from 4mm-.70 through 6mm-1.0 and #10-32. Choosing a known material, grade, and finish combination like this helps keep machine and equipment assemblies consistent from batch to batch, regardless of which size in the lineup you need.