Midwest Fasteners E-Z Ancor Zinc Plated Steel Self-Drilling Drywall Wall Anchors
Midwest Fasteners E-Z Ancor Zinc Plated Steel Self-Drilling Drywall Wall Anchors are self-drilling hollow wall anchors made from zinc-plated steel, built to hold screws and fixtures securely in standard drywall without needing a wall stud. This anchor family is available in #6 x 1-1/4" and #8 x 1-1/4" sizes, so you can match the anchor diameter to the screw and the load you are hanging, whether that is a small picture frame or a heavier shelf bracket. The self-drilling point lets you set the anchor directly into drywall with a screwdriver or drill, with no pilot hole and no separate drywall bit required, which keeps installation fast on punch-list and maintenance work. Steel construction with a zinc-plated finish helps the anchor resist corrosion once it is set behind the wall surface.
Key Features
- Size: Available in #6 x 1-1/4" and #8 x 1-1/4" anchor sizes, covering a practical range of light-duty to medium-duty drywall mounting needs.
- Material & Finish: Steel body with a zinc-plated finish for corrosion resistance during and after installation.
- Point Type: Self-drilling point drives straight into drywall, eliminating the pilot-hole step required by standard plastic or metal drywall anchors.
- Type: Self-drilling hollow wall (drywall) anchor in the E-Z Ancor style, designed to anchor screws in hollow wall board.
- Country of Origin: Manufactured in China.
Technical Specifications
- Product Type: Self-Drilling Drywall Anchor
- Product Finish: Zinc-Plated
- Country of Origin: China
- Point Type: Self-Drilling
- Product Material: Steel
Typical Applications
- Hanging shelves, mirrors, and picture frames on drywall where no stud is available.
- Mounting curtain rods, towel bars, and light fixtures into hollow wall board.
- Securing cabinets, brackets, and hooks in drywall for home and light commercial installations.
- General maintenance and repair work calling for a quick, no-pilot-hole drywall anchor.
Why Midwest Fasteners?
Midwest Fasteners supplies these E-Z Ancor style wall anchors in zinc-plated steel so installers and maintenance techs get the same material and finish anchor after anchor, job after job. The self-drilling point removes an installation step compared to anchors that require a separate pilot hole, which matters when you are working through a stack of mounting points in drywall. With both #6 x 1-1/4" and #8 x 1-1/4" sizes in the lineup, Midwest Fasteners gives you a consistent, dependable anchor option sized to the screw and load at hand.
Manufacturer Resources
Product Specs
- Product Type:
- Self-Drilling Drywall Anchor
- Product Finish:
- Zinc-Plated
- Country of Origin:
- China
- Department:
- Fasteners
- Product Group:
- Anchors
- Product Subgroup:
- Hollow Wall Anchors
- Point Type:
- Self-Drilling
- Product Material:
- Steel