Midwest Fasteners Grade 2 A307 Zinc-Plated Steel Square Neck Carriage Bolt
Midwest Fasteners' Grade 2 / A307 zinc-plated steel carriage bolt line is built for wood-to-wood and wood-to-metal connections that need a clean, tamper-resistant head on the finished face. This family is available across bolt diameters of 1/4", 5/16", 3/8", and 1/2", with coarse thread sizes of 1/4"-20, 5/16"-18, 3/8"-16, and 1/2"-13, and lengths spanning from 1" up to 10" depending on the diameter-and-length combination selected. Every option shares the same Grade 2 / A307 general-purpose strength rating, zinc-plated steel construction, and carriage-bolt head-and-square-neck design, so you can match the exact size your project calls for while the material, finish, and strength class stay consistent across the line.
Key Features
- Size Range: 1/4"-20, 5/16"-18, 3/8"-16, and 1/2"-13 thread sizes with lengths from 1" through 10", each with a coarse thread pitch for standard nut and tapped-hole compatibility.
- Material & Finish: Steel construction with a zinc-plated coating on every size for added corrosion resistance over bare steel in dry to moderately damp indoor and sheltered outdoor environments.
- Head & Neck: Smooth round carriage-bolt head with a square neck that self-locks against rotation once seated, letting you tighten the nut from the opposite side without the head spinning.
- Grade: Grade 2 / A307 general-purpose strength rating is shared across the entire size range, suitable for light structural and utility assemblies.
- Thread: Coarse thread pitch on every diameter (20, 18, 16, or 13 TPI depending on size) for faster starts and broad nut compatibility.
Technical Specifications
- Product Type: Carriage Bolt
- Product Material: Steel
- Finish: Zinc Plated
- Grade: Grade 2 / A307
- Thread Type: Coarse
- Country of Origin: China
Typical Applications
- Deck and fence framing where a smooth finished head is needed on the visible face.
- Wood-to-wood and wood-to-metal furniture, bench, and gate assemblies.
- General maintenance and repair projects needing a self-locking bolt that resists spinning during tightening.
- Playground, dock, and outdoor structure assembly where a tamper-resistant head profile is preferred.
- Any application calling for a range of bolt diameters and lengths from a single consistent Grade 2 / A307 specification.
Why Midwest Fasteners?
Midwest Fasteners supplies this carriage bolt line to a consistent Grade 2 / A307 steel specification with zinc plating applied across every diameter and length, giving contractors and maintenance techs a dependable, correctly sized fastener family for repeat jobsite use. Holding to the stated thread pitches and dimensions batch after batch, size after size, means less time double-checking fit and more time getting the assembly done, whether the job calls for a short 1" bolt or a long 10" bolt in the same trusted finish and grade.
Manufacturer Resources
Product Specs
- Product Type:
- Carriage Bolt
- Product Finish:
- Zinc-Plated
- Grade:
- Grade 2 / A307
- Country of Origin:
- China
- Department:
- Fasteners
- Product Group:
- Bolts
- Product Subgroup:
- Specialty Bolts
- Thread Type:
- Coarse
- Product Material:
- Steel
- Product Size:
- 3/8"-16 x 3-1/2"