Midwest Fasteners Solid Steel Standoff Spacer

Midwest Fasteners Solid Steel Standoff Spacer

Midwest Fasteners' solid steel standoff spacer is machined from solid steel rather than hollow stamped stock, giving it a consistent wall thickness and a true bore that holds a fixed, uniform gap between two mated surfaces under a bolted or screwed assembly. This spacer is available in a full range of bore-by-outside-diameter-by-length combinations, from 1/4 x 3/8 x 1/2 up through 3/4 x 1 x 2, so maintenance techs and fabricators can select the exact standoff dimension a job calls for without improvising a washer stack. Because the body is solid rather than a thin-wall sleeve, it resists crushing under clamp load and keeps its dimension through repeated tightening and loosening cycles, which matters anywhere a precise standoff is part of the assembly spec rather than an afterthought.

Key Features

• Size Range: Available in bore-by-outside-diameter-by-length combinations spanning 1/4 x 3/8 x 1/2 up to 3/4 x 1 x 2, including 1/2 x 5/8 x 1, 1/2 x 5/8 x 1-1/2, 1/4 x 3/8 x 3/4, 3/4 x 1 x 1, 3/4 x 1 x 1-1/2, 3/8 x 1/2 x 1, 3/8 x 1/2 x 1-1/2, 5/8 x 7/8 x 1, and 5/8 x 7/8 x 1-1/2, so you can select the size this page offers to match the exact standoff distance an assembly requires.
• Material: Solid steel construction for rigidity and consistent load-bearing performance under clamping force, across every size in the range.
• Type: Spacer, used to maintain a fixed standoff distance between two surfaces or components in a fastened assembly.
• Construction: Solid body (not a hollow stamped sleeve) for improved resistance to deformation under repeated tightening and loosening.
• Consistent Bore: Machined for a true, consistent bore so the bolt or screw passes through cleanly at every size offered.

Technical Specifications

• Product Type: Spacer
• Product Material: Steel
• Size Range: 1/4 x 3/8 x 1/2 through 3/4 x 1 x 2 (select size on this page)

Typical Applications

• Maintaining a fixed standoff gap between mounted brackets, panels, or housings.
• Equipment and machine assembly where a bolt passes through a bore and a precise gap is required between two parts.
• Maintenance and repair work replacing worn or missing spacers in existing hardware assemblies.
• Fabrication projects needing a solid steel standoff that will not compress or deform under clamp load.
• Stocking a range of standoff sizes on the bench for repeatable spacing jobs across varied assemblies.

Why Midwest Fasteners?

Midwest Fasteners builds this spacer line from solid steel rather than lighter-duty stamped stock, giving contractors and maintenance techs a dependable part that holds its dimension assembly after assembly across the full size range, from 1/4 x 3/8 x 1/2 up through 3/4 x 1 x 2. The solid body resists crushing under clamp load and keeps a true, consistent bore at every size offered, so the bolt or screw always passes through cleanly. For shops that need consistent, repeatable standoff hardware on hand for routine repair and fabrication work, selecting the right bore-by-outside-diameter-by-length combination from this solid steel spacer range is a straightforward, no-surprises choice.