Midwest Fasteners Zinc Plated ...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$1.24

Midwest Fasteners Zinc Plated Steel Combo Pan Head Sheet Metal Screws

(No reviews yet) Write a Review

Model: MWF21270

In Stock (leaves warehouse same day if ordered before 3pm ET)

$1.24
Adding to cart… The item has been added
Free Shipping on orders over $199.99
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks

Midwest Fasteners Zinc Plated Steel Combo Pan Head Sheet Metal Screws

Midwest Fasteners Combo Pan Head Sheet Metal Screws are zinc plated steel tapping screws built for fastening into thin metal, sheet stock and other light-gauge applications where a self-tapping thread is needed. This family is available across #4, #6, #10, #12 and #14 screw diameters with lengths spanning 3/8" to 3", so installers can match the exact fastener to the job rather than settling for a one-size-fits-all part. Every size in the line shares the same pan head configuration and combo drive, letting installers seat the fastener with either a Phillips or slotted bit depending on what's on hand at the bench or on the jobsite. The zinc plated steel construction provides a baseline layer of corrosion resistance for everyday shop, HVAC, enclosure and metal fabrication work, and these screws are manufactured in Taiwan to consistent sizing and finish standards across every size option.

Key Features

  • Size Range: Available in #4, #6, #10, #12 and #14 screw diameters with lengths from 3/8" up to 3", covering the sizes most commonly needed for light-gauge metal fastening.
  • Material & Finish: Zinc plated steel construction resists surface corrosion and gives every screw in the range a clean, consistent look on finished metal assemblies.
  • Head Type: Pan head design sits flush against the work surface while providing a broad bearing surface for a secure hold, consistent across all sizes in the family.
  • Drive Type: Combo drive accepts both Phillips and slotted bits on every size, so installers aren't stuck searching for a specific driver mid-job.
  • Type: Tapping screw thread design is engineered to cut its own mating threads into sheet metal and similar thin-gauge materials, eliminating the need for a pre-tapped hole in many applications regardless of size selected.
  • Country of Origin: Manufactured in Taiwan across the full size range.

Technical Specifications

  • Product Type: Tapping Screw
  • Product Finish: Zinc Plated
  • Configuration: Pan Head
  • Country of Origin: Taiwan
  • Product Material: Steel
  • Screw Sizes Available: #4, #6, #10, #12, #14 in lengths from 3/8" to 3"

Typical Applications

  • Fastening sheet metal panels, brackets and light-gauge enclosures
  • HVAC ductwork and metal trim assembly
  • General metal fabrication and repair work
  • Shop and maintenance tasks requiring a self-tapping fastener into thin stock
  • Jobsite assemblies where a flexible Phillips/slotted combo drive is useful
  • Stocking a range of sizes for varied light-gauge fastening needs on a single jobsite

Why Midwest Fasteners?

Midwest Fasteners supplies zinc plated steel sheet metal screws built to consistent sizing, material and finish standards across the full #4 through #14 range so contractors, fabricators and maintenance techs can rely on a predictable fit every time they reach for this part, no matter which size the job calls for. The pan head and combo drive configuration keeps installation straightforward across different toolsets, and the Taiwan manufacturing origin is documented for traceability on professional and maintenance jobs alike. Keep this Combo Pan Head Sheet Metal Screw family stocked in multiple sizes for routine light-gauge metal fastening needs across the shop or jobsite.

Manufacturer Resources

Product Specs

Product Type:
Tapping Screw
Product Finish:
Zinc Plated
Configuration:
Pan Head
Country of Origin:
Taiwan
Product Subgroup:
Tapping Screws
Product Group:
Screws
Department:
Fasteners
Head Type:
Pan
Drive Type:
Combo
Product Material:
Steel

Midwest Fasteners MWF21270 – Frequently Asked Questions

How fast can I get the Midwest Fasteners MWF21270 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Midwest Fasteners MWF21270 come with a warranty?
Absolutely. The Midwest Fasteners MWF21270 is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Midwest Fasteners MWF21270?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Midwest Fasteners MWF21270 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.