Milwaukee 48-22-7100 Faucet Sw...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$33.33
Milwaukee 48-22-7100 Faucet Swap-Out Wrench, Hand Tool

Milwaukee 48-22-7100 Faucet Swap-Out Wrench, Hand Tool

(No reviews yet) Write a Review

Model: 48-22-7100

In Stock (leaves warehouse same day if ordered before 3pm ET)

$33.33
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like

Milwaukee 48-22-7100 Faucet Swap-Out Wrench, Hand Tool

The Milwaukee Faucet Swap-Out Wrench is a purpose-built hand tool designed to simplify one of the most repetitive and awkward tasks in plumbing work: removing and installing faucet mounting nuts. As a dedicated swap-out wrench, it gives plumbers, maintenance technicians, and DIY installers a faster, more direct way to access and turn faucet hardware, especially in the tight, confined spaces typically found underneath sinks and countertops. Backed by the Milwaukee name, this specialty wrench is built to help tradespeople complete faucet swaps efficiently without wrestling with bulky general-purpose tools, adjustable wrenches, or improvised workarounds that were never intended for this kind of job. This dedicated wrench is a practical addition to any plumber's tool bag, offering a straightforward, single-purpose solution for a task that traditional wrenches often handle poorly. Whether replacing a worn-out faucet or installing a brand-new fixture, having a wrench matched to the job can make the difference between a quick repair and a frustrating one.

Key Features

  • Purpose-Built Swap-Out Design: engineered specifically to remove and install faucet mounting nuts, rather than serving as a generic adjustable wrench.
  • Space-Saving Profile: shaped to reach into the tight, hard-to-access areas commonly found beneath sinks and countertops during faucet installation or replacement.
  • Simplified Faucet Servicing: reduces the need to juggle multiple wrenches, pliers, or improvised tools when swapping out old or damaged faucets.
  • Dedicated Hand Tool: a task-specific wrench from Milwaukee, built to support the demands of faucet removal and installation work in the field.
  • Streamlined Toolkit: eliminates the need to carry an assortment of general wrenches and pliers just to service faucets, keeping the tool bag lighter and more organized.

Technical Specifications

  • Refer to manufacturer documentation for complete technical specifications.

Typical Applications

  • Faucet Installation and Removal
  • Under-Sink Plumbing Repairs
  • Kitchen and Bathroom Faucet Servicing
  • Tight-Space Plumbing Maintenance
  • Residential and Commercial Plumbing Work

Why Milwaukee?

Milwaukee is widely recognized among plumbing and trade professionals for producing tools engineered around specific jobsite tasks rather than one-size-fits-all designs. The Faucet Swap-Out Wrench continues that approach, giving installers a dedicated tool for one of the more repetitive and awkward steps in faucet replacement. Choosing a task-specific wrench like this can help reduce installation time and frustration compared to relying on generic tools that were not designed for faucet hardware. For plumbing professionals who value efficiency on every job, a purpose-built tool like this Faucet Swap-Out Wrench is a small addition that can have an outsized impact on daily productivity.

Manufacturer Resources

Product Specs

list_batch:
MWK-20260918
Product Type:
Wrench
Department:
Electrical
Product Subgroup:
Hammers & Wrenches
Application:
Faucet and Sink Swapouts
Product Depth:
13.8 in
Product Group:
Hand Tools

Milwaukee 48-22-7100 – Frequently Asked Questions

1) What is the Milwaukee 48-22-7100 wrench actually used for?
It's a dedicated faucet swap-out wrench, built for turning faucet mounting nuts during removal and installation of sink faucets. Milwaukee lists the application as faucet and sink swapouts, so it's not a general adjustable wrench, it's the tool you reach for when you're on your back under a sink dealing with mounting hardware instead of fighting the job with pliers.
2) How long is the Milwaukee faucet swap-out wrench, and will it reach the back nuts under a sink?
The tool measures 13.8 inches in depth, so it gives you a long reach up behind a sink basin to get at rear mounting nuts without crowding your hands into the cabinet. That length is the point of the design: it's shaped to work in the confined space between the basin, the deck, and the cabinet back wall.
3) Should I buy a faucet swap-out wrench or just use a basin wrench?
Both target the same problem, nuts you can't reach with a standard wrench. The 48-22-7100 is a single-purpose swap-out wrench sized for faucet mounting nuts, which means no jaw adjusting and no re-seating every quarter turn. If you only service faucets occasionally, a general tool will get you through. If you're swapping fixtures routinely across units, a dedicated wrench cuts the fumbling, and it replaces the handful of wrenches and pliers you'd otherwise carry just for faucet work.
4) Is the Milwaukee 48-22-7100 a good fit for multi-family and commercial faucet maintenance?
Yes. Milwaukee lists residential and commercial plumbing work and under-sink repairs among the typical applications, which is exactly the fixture-turnover work property maintenance teams run. One tool per truck covers kitchen and bath faucet servicing, so it standardizes well across a portfolio instead of each tech carrying a different improvised setup.
5) What is the Milwaukee faucet wrench part number and where is it made?
The part number is Milwaukee 48-22-7100, sold as a single model with no size or finish options to pick. Country of origin is Vietnam. Distributors ordering against a spec should quote the full 48-22-7100 designation, since Milwaukee's hand tool line uses closely numbered SKUs across different plumbing tools.
6) Does the Milwaukee faucet swap-out wrench need any other tools or accessories to use it?
No. It's a manual hand tool, no battery, no sockets, no adapters. You turn it by hand. It won't cut supply lines or loosen drain slip nuts though, so a tube cutter and channel-lock pliers still belong in the bag for a full faucet replacement.
How fast can I get the Milwaukee 48-22-7100 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Milwaukee 48-22-7100 come with a warranty?
Absolutely. The Milwaukee 48-22-7100 is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Milwaukee 48-22-7100?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Milwaukee 48-22-7100 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!