You may also like
Milwaukee 49-56-9285 8-Piece BIG HAWG Carbide-Tooth Hole Saw Kit
Model: MWK-P473257
Milwaukee 49-56-9285 8-Piece BIG HAWG Carbide-Tooth Hole Saw Kit for PlumbersThe Milwaukee 49-56-9285 8-Piece BIG HAWG Carbide-Tooth Hole Saw Kit brings Milwaukee's BIG HAWG hole saw lineup together...
Milwaukee
Starting at
$239.91
Milwaukee 49-56-9300 BIG HAWG Carbide-Tooth Pilot Bit for Hole Saws
The Milwaukee 49-56-9300 BIG HAWG Carbide-Tooth Pilot Bit is a replacement pilot bit engineered for use with Milwaukee's BIG HAWG hole saw system. Featuring carbide teeth for long-lasting durability, this pilot bit centers and guides the hole saw during the cut, helping tradespeople start clean, accurate holes in a variety of materials. Designed as a genuine Milwaukee replacement component, it restores full cutting performance to BIG HAWG hole saw arbors that rely on a sharp, reliable pilot point.
Key Features
- Carbide Teeth: The pilot bit is fitted with carbide teeth, providing added hardness and wear resistance compared to standard steel pilot pins, so it holds a sharp point through repeated use.
- BIG HAWG System Compatibility: Purpose-built for Milwaukee's BIG HAWG hole saw line, this pilot bit is designed to fit BIG HAWG arbors, keeping the hole saw properly aligned as it engages the material.
- Reliable Cut Starts: A sharp, centered pilot point helps prevent the hole saw from walking or wandering when starting a cut, supporting straighter, more accurate holes.
- Genuine Milwaukee Replacement Part: As an authentic Milwaukee component, model 49-56-9300 is manufactured to the same fit and performance standards as the pilot bit that ships with new BIG HAWG hole saws.
- Easy Field Replacement: Swapping in a fresh carbide-tooth pilot bit is a simple way to extend the working life of an existing BIG HAWG hole saw arbor without replacing the entire assembly.
Technical Specifications
- Refer to manufacturer documentation for complete technical specifications.
Typical Applications
- Hole Saw Setup and Pilot Point Replacement
- Electrical and Low-Voltage Rough-In Hole Cutting
- Plumbing and HVAC Penetrations
- Electrical Panel and Box Cutouts
- Commercial and Residential Construction Trades
- Maintenance, Retrofit, and Repair of Existing BIG HAWG Hole Saw Arbors
Why Milwaukee?
Milwaukee builds the BIG HAWG hole saw system around durable, purpose-matched components like the 49-56-9300 carbide-tooth pilot bit, so professionals can keep cutting accurately without replacing an entire hole saw arbor. Choosing a genuine Milwaukee pilot bit helps maintain the fit, alignment, and cutting performance the BIG HAWG system was designed to deliver on the jobsite. For contractors already invested in the BIG HAWG lineup, keeping a spare 49-56-9300 pilot bit on hand supports minimal downtime when a pilot point wears down or breaks during a job.
Manufacturer Resources
Product Specs
- list_batch:
- MWK-20260918
- Product Type:
- Pilot Bit
- Series:
- BIG HAWG
- Department:
- Electrical
- Product Subgroup:
- Hole Saws & Bits
- Product Material:
- Carbide
- Product Group:
- Power Tools & Accessories
- Product Length:
- 4.5 in
Milwaukee 49-56-9300 – Frequently Asked Questions
1) Will the Milwaukee 49-56-9300 pilot bit fit my BIG HAWG hole saw arbor?
Yes. The 49-56-9300 is the genuine Milwaukee replacement pilot bit built for the BIG HAWG hole saw system, so it drops into BIG HAWG arbors and keeps the saw centered as it engages the material. It is made to the same fit as the pilot bit that ships with a new BIG HAWG hole saw. It is not a universal pilot pin, so if your arbor is from another hole saw line, this is not the part.
2) Do I have to replace the whole BIG HAWG hole saw when the pilot bit wears out?
No. The pilot point is a serviceable part. Swapping in a fresh 49-56-9300 carbide-tooth pilot bit restores cutting performance on an existing BIG HAWG arbor without buying a new assembly, which is why crews running conduit or plumbing penetrations all day keep a spare in the case.
3) Is the Ideal Industries 36-812 pilot bit a direct replacement for the Milwaukee 49-56-9300?
No. The Milwaukee 49-56-9300 is a carbide-tooth pilot bit built specifically for Milwaukee's BIG HAWG hole saw system, so it matches the fit and alignment of BIG HAWG arbors. The Ideal Industries 36-812 is a hole cutter pilot bit replacement for Ideal's own hole cutter line. If the arbor in hand is a BIG HAWG, order the 49-56-9300; if it is an Ideal hole cutter, the 36-812 is the replacement for that system. Pilot bits are arbor-specific and should not be cross-fitted between manufacturers.
4) What is the difference between a carbide-tooth pilot bit and a standard steel pilot pin?
Carbide is the cutting material on the 49-56-9300, and it is harder and more wear resistant than standard steel pilot pins, so the point stays sharp through repeated holes. For an electrician or plumber boring a long run of holes in framing, that means fewer stops to change the pilot and less chance of the saw walking off the layout mark mid-shift.
5) My hole saw keeps wandering when I start a cut. Will a new pilot bit fix that?
Usually, yes. A worn or broken pilot point is the most common cause of a hole saw walking at the start of a cut. The 49-56-9300 provides a sharp, centered point that holds the BIG HAWG saw on the mark as the teeth engage, giving straighter, more accurate holes in panel cutouts and rough-in work.
6) Is there a replacement pilot bit for hole cutters other than the Milwaukee BIG HAWG one?
If your cutter is not a BIG HAWG, the Milwaukee 49-56-9300 is not the right part. Ideal Industries also sells a hole cutter pilot bit replacement, the 36-812, for its own cutters. Match the pilot bit to the brand and arbor of the saw body you already own rather than by diameter alone.
7) I have both Milwaukee and Ideal hole cutters on the van - do I need to stock two different pilot bits?
Yes. Each system uses its own pilot bit. The Milwaukee 49-56-9300 carbide-tooth pilot bit is the genuine replacement point for BIG HAWG hole saw arbors, and the Ideal Industries 36-812 is the pilot bit replacement for Ideal hole cutters. For contractors running both, keeping one of each on hand avoids a stopped cut when a pilot point wears or snaps mid-job.
8) What is the difference in cutting tip between the Milwaukee 49-56-9300 and the Ideal 36-812 pilot bit?
The Milwaukee 49-56-9300 uses carbide teeth on the pilot point, which gives it added hardness and wear resistance over a standard steel pilot pin and lets it hold a point through repeated hole starts in mixed materials. The Ideal Industries 36-812 is sold as a hole cutter pilot bit replacement for Ideal's hole cutters. Buyers choosing a pilot point for frequent rough-in work in wood with embedded nails or similar abrasive conditions typically go with the carbide-tooth design.
9) What is the Milwaukee part number for the BIG HAWG replacement pilot bit?
Order Milwaukee 49-56-9300. That is the manufacturer part number for the BIG HAWG carbide-tooth pilot bit, and it is the identifier to quote to a distributor so you get the genuine Milwaukee component rather than a generic pilot pin.
10) What kind of work is the BIG HAWG pilot bit used for?
It is a rough-in part. Typical use is electrical and low-voltage hole cutting, plumbing and HVAC penetrations, and electrical panel or box cutouts, on both commercial and residential jobs. Maintenance crews also keep one for servicing existing BIG HAWG arbors already in the tool inventory.
How fast can I get the Milwaukee 49-56-9300 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Milwaukee 49-56-9300 come with a warranty?
Absolutely. The Milwaukee 49-56-9300 is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Milwaukee 49-56-9300?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Milwaukee 49-56-9300 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.