You may also like
Milwaukee Tool 48-32-4562 SHOCKWAVE, Impact Duty 3-1/2, Impact Duty Phillips #2 Power Bit
Model: MWK-48-32-4562
SHOCKWAVE, Impact Duty 3-1/2, Impact Duty Phillips #2 Power Bit
Features
Long Lasting Tip, Wear Guard,
Customized Tip Geometry, Less Stripping
Laser etched for easy size identification
Most durable,...
Milwaukee
$54.50
$4.59
Milwaukee 48-32-4802 SHOCKWAVE Impact Duty Phillips #2 Power Bit, 6" Length
Model: MWK-48-32-4802
Milwaukee 48-32-4802 SHOCKWAVE Impact Duty Phillips #2 Power Bit, 6" LengthThe Milwaukee 48-32-4802 SHOCKWAVE Impact Duty Phillips #2 Power Bit is engineered for professionals who demand reliable,...
Milwaukee
$7.47
SHOCKWAVE, Impact Duty 2" Phillips #3 Power Bits Bulk 25
Features
- Ultimate Fit
- Laser etched size for easy identification
- Custom heat treat for longer bit life
- Most durable, SHOCKZONE, shank absorbs peak torque
- Long Lasting Tip, Wear Guard,
- Designed for use with impact Driver Driver Bits and drill Driver Driver Bits
- Customized Tip Geometry, Less Stripping
- SHOCKZONE, shanks are optimized per tip type to prevent breaking
- Laser etched for easy size identification
Manufacturer Resources
Product Specs
- Product Type:
- Driver Bit
- Department:
- Electrical
- Product Subgroup:
- Drill & Driver Bits
- Product Material:
- Proprietary Steel
- Product Length:
- 2 in
- Product Group:
- Power Tools & Accessories
Milwaukee 48-32-4762 – Frequently Asked Questions
1) Which Phillips point sizes do the Milwaukee SHOCKWAVE 2 inch power bits come in?
Two point sizes: Phillips #2 (part 48-32-4762) and Phillips #3 (part 48-32-4763). Both are 2 inches long, and the size is laser etched on the bit so crews can pick the right one out of a pouch without squinting at the tip.
2) Can I run the SHOCKWAVE 2 inch Phillips bit in an impact driver, or is it drill-only?
It's built for both. The SHOCKWAVE Impact Duty bits are made for impact drivers as well as drills, and the SHOCKZONE shank section is what absorbs the peak torque spikes an impact gun throws at a bit instead of transferring them straight into the tip.
3) Do these Milwaukee bits fit a standard 1/4 inch hex quick-change chuck?
Yes. The SHOCKWAVE 2 inch Phillips power bits have a 1/4 inch hex shank, so they drop straight into any impact driver collet or 1/4 inch quick-change holder in a drill chuck. No separate insert-bit holder needed, since the hex is part of the bit.
4) What should I use instead of a 2-inch Phillips power bit for driving hex-head self-tapping screws?
A Phillips bit will not engage a hex-head fastener. For hex-head sheet metal and self-drilling screws, use a hex magnetic driver such as the Rack-A-Tiers 70462RY, a 2-inch hexagonal magnetic driver bit in the Malco C-Rhex series. The Milwaukee SHOCKWAVE bit covers Phillips #2 and #3 cross-recess fasteners only, in the same 2-inch length.
5) Why do Phillips bits keep stripping screw heads, and does this one help?
Cam-out usually comes from a tip that doesn't seat fully in the recess. These SHOCKWAVE Phillips bits use a customized tip geometry aimed specifically at reducing stripping, plus a Wear Guard tip and a custom heat treat for tip life. Still match the number to the screw: a #2 in a #3 recess will cam out no matter what the bit is made of.
6) Is the Rack-A-Tiers 70462RY a substitute for a Milwaukee SHOCKWAVE 2-inch Phillips bit?
No. They share the 2-inch length but drive different recesses. The 70462RY is a hexagonal magnetic driver bit in the Malco C-Rhex series, which seats over the head of a hex fastener and holds it magnetically. The Milwaukee SHOCKWAVE is a Phillips power bit made from proprietary steel with a SHOCKZONE shank that absorbs peak torque, supplied in #2 and #3 point sizes. Carry both if the job mixes hex-head screws with Phillips drywall or wood screws.
7) What is the SHOCKWAVE 2 inch Phillips bit made of, and where is it made?
The bit body is a proprietary steel with a custom heat treat on the tip, and the bits are made in Vietnam. That matters mostly for spec sheets and procurement paperwork on institutional and government orders, where country of origin has to be documented.
8) Are these Milwaukee Phillips bits sold in bulk for a crew or a tool room?
The #3 SHOCKWAVE 2 inch Phillips bit is described as a bulk 25 pack, which is the format MRO tool rooms and electrical crews usually buy for restocking bit bins rather than single-bit clamshells.
How fast can I get the Milwaukee 48-32-4762 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Milwaukee 48-32-4762 come with a warranty?
Absolutely. The Milwaukee 48-32-4762 is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Milwaukee 48-32-4762?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Milwaukee 48-32-4762 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.