Minerallac 59608 Hex Rod Coupl...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$147.77
Minerallac 59608 Hex Rod Coupling, 1/2"-13 x 1-1/4", Zinc Plated, Pack of 100

Minerallac 59608 Hex Rod Coupling, 1/2"-13 x 1-1/4", Zinc Plated, Pack of 100

(No reviews yet) Write a Review

Model: 59608

In Stock (leaves warehouse same day if ordered before 3pm ET)

$147.77
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like

Minerallac 59608 Hex Rod Coupling, 1/2"-13 x 1-1/4", Zinc Plated

The Minerallac 59608 Hex Rod Coupling is a threaded connector designed to join two lengths of 1/2"-13 threaded rod into a single continuous run. Featuring a hex-shaped body for easy wrench tightening and an overall length of 1-1/4", this coupling delivers a secure, dependable connection point for rod-based support systems. The zinc-plated finish provides corrosion resistance, making the 59608 coupling a practical choice for electricians and contractors assembling conduit, cable tray, and equipment support hardware.

Key Features

  • Thread Size: 1/2"-13 threaded rod coupling designed to join two rod sections into one continuous length.
  • Coupling Length: 1-1/4" overall length provides ample thread engagement for a secure, vibration-resistant connection.
  • Hex Body Design: The hex-shaped exterior allows the coupling to be tightened firmly with a standard wrench during installation, reducing the chance of loosening once torqued into place.
  • Zinc-Plated Finish: Zinc plating helps resist surface corrosion, extending the service life of the coupling in typical indoor installation environments.
  • Threaded Rod Compatibility: Sized to work with standard 1/2"-13 all-thread rod commonly used in electrical and mechanical support and hanger assemblies.
  • Simple Field Installation: Threads onto existing 1/2"-13 rod sections without special tools, allowing quick extension or repair of a support run on the jobsite.

Technical Specifications

  • Refer to manufacturer documentation for complete technical specifications.

Typical Applications

  • Conduit and Cable Tray Support Systems
  • Threaded Rod Extensions for Suspended Equipment
  • Strut and Unistrut Mounting Assemblies
  • Commercial and Industrial Electrical Installations
  • Renovation and New Construction Support Hardware

Why Minerallac?

Minerallac products are built to give electrical contractors reliable, easy-to-install hardware for everyday jobsite needs. The 59608 rod coupling's hex design and zinc-plated finish reflect a focus on straightforward installation and long-term corrosion resistance, helping ensure secure rod-to-rod connections throughout the life of the installation. Its compact 1-1/4" length and standard 1/2"-13 thread make it easy to stock alongside other Minerallac rod and support hardware for a wide range of electrical projects.

Manufacturer Resources

Product Specs

list_batch:
MIN-20260918
Product Type:
Rod Coupling
Product Finish:
Zinc Plated
Configuration:
Hex
Department:
Electrical
Product Subgroup:
Hex Bolts & Nuts
Product Size:
1/2"
Pack size (unit):
100
Product Group:
Hangers, Supports & Fasteners
Product Length:
1.25 in
Product Color:
Silver
Product Width:
0.688 in

Minerallac 59608 – Frequently Asked Questions

1) Will the Minerallac 59608 coupling join two pieces of 1/2 inch all-thread rod?
Yes. The 59608 is threaded 1/2"-13 straight through, so it takes standard 1/2 inch all-thread rod from both ends and joins the two sections into one continuous run. Thread both rods in until they meet near the middle of the 1-1/4 inch body so each side gets roughly equal engagement.
2) Is a 1-1/4 inch long rod coupling enough thread engagement for a hanger run?
At 1-1/4 inches overall with 1/2"-13 threads running through, each rod end picks up a little over half an inch of engagement when the rods butt in the center. That is the standard short coupling used for conduit, cable tray, and suspended equipment support. If your spec calls for deeper engagement per side, you want a longer coupling nut instead.
3) Can zinc plated rod couplings be used outdoors or in a wet location?
Zinc plating on the 59608 resists surface corrosion in typical indoor installation environments, which is what it is intended for. For exterior, damp, or corrosive areas, specify a hot dip galvanized or stainless coupling instead.
4) Can I use a hex rod coupling to extend an existing threaded rod drop that came up short?
That is one of its main uses. Thread the 59608 onto the existing 1/2"-13 rod, run a second piece of rod into the other end, and the drop is extended with no special tools. Same approach works for repairing a damaged rod end on an existing support run.
5) Will this coupling work with strut and Unistrut hanger assemblies?
Yes, as long as the assembly uses 1/2"-13 threaded rod. The 59608 joins rod to rod; it does not attach rod to channel. For the channel connection you still need the appropriate strut nut or rod hanger fitting.
6) How many rod couplings come in a box of Minerallac 59608?
The 59608 ships 100 couplings per pack. That quantity suits a contractor stocking a truck or a job trailer for a full conduit or tray hanger package rather than a one-off repair.
7) Where is Minerallac rod hardware made?
The 59608 hex rod coupling is manufactured in Taiwan. Some institutional and government jobs carry domestic sourcing requirements, so that matters if your spec includes one.
How fast can I get the Minerallac 59608 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Minerallac 59608 come with a warranty?
Absolutely. The Minerallac 59608 is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Minerallac 59608?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Minerallac 59608 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!