Minerallac 59808 1/2"-13 x 10'...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$52.21
$2.21
Minerallac 59808 1/2"-13 x 10' Threaded Rod, Zinc-Plated Steel

Minerallac 59808 1/2"-13 x 10' Threaded Rod, Zinc-Plated Steel

(No reviews yet) Write a Review

Model: 59808
Selected Model is

In Stock (leaves warehouse same day if ordered before 3pm ET)

$52.21
$2.21
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like

Minerallac 59808 1/2"-13 x 10' Threaded Rod, Zinc-Plated Steel

The Minerallac 59808 is a 1/2"-13 x 10' threaded rod constructed from low carbon steel with a zinc-plated finish, engineered to support most standard size fasteners in electrical, mechanical, and general construction applications. Featuring a full 13 threads-per-inch pattern along its entire 10 foot length, this rod is ready to be field-cut to the exact length needed for hanging conduit, cable tray, strut channel, and other overhead support systems. The zinc plating provides a layer of corrosion resistance for indoor installations where a durable, code-compliant fastening solution is required. Contractors and electricians rely on threaded rod like the 59808 as a foundational hanging and bracing component in commercial, industrial, and residential projects, and its low carbon steel base delivers the mechanical strength needed to safely support the weight of conduit runs and equipment over long spans. Whether used for suspending strut channel from overhead structure, bracing cable tray, or fastening standard hardware, the 59808 offers a straightforward, dependable solution that installers can size on the jobsite with a hacksaw or rod cutter. Its 1/2"-13 thread standard ensures compatibility with a broad range of nuts, washers, and hanging hardware already stocked on most jobsites, minimizing the need for specialty fasteners and simplifying material planning for larger overhead support runs.

Key Features

  • Trade Size: 1/2"-13 thread size for compatibility with most standard fasteners, nuts, and washers.
  • Length: 10 FT full-length rod that can be field-cut to the exact length needed for the installation.
  • Thread Pitch: 13 threads per inch for a consistent, secure engagement with matching hardware.
  • Durable Construction: Low carbon steel base material provides strength suitable for supporting conduit runs, strut systems, and general fastening applications.
  • Finish: Zinc-plated coating helps resist corrosion and extends service life in typical indoor electrical and mechanical environments.
  • Versatile Sizing: The full 10 foot length allows installers to cut multiple shorter drop lengths from a single rod, reducing material waste on the jobsite.

Technical Specifications

  • Country Of Origin: Taiwan, Province of China
  • Product Finish: Zinc Plated
  • Product Length: 10 FT
  • Product Material: Low Carbon Steel
  • Thread Per Inch: 13

Typical Applications

  • Hanging and Supporting Conduit Runs
  • Strut Channel and Cable Tray Support Systems
  • General Fastening of Standard Size Hardware
  • Commercial and Industrial Electrical Installations
  • New Construction and Renovation Projects

Why Minerallac?

Minerallac's 59808 threaded rod is manufactured from low carbon steel with a zinc-plated finish, giving installers a dependable, corrosion-resistant fastening component built to the 1/2"-13 thread standard. Its full 10 foot length and consistent 13 threads-per-inch pitch make it a versatile choice for electricians and contractors who need reliable support hardware that can be sized on site for a wide range of standard fastening applications, from conduit hangers to strut assemblies, without sacrificing thread engagement or load-bearing performance. For professionals who need a straightforward, code-compliant hanging and bracing solution that performs consistently across commercial, industrial, and residential jobsites, the Minerallac 59808 delivers the mechanical strength and corrosion resistance required for long-term overhead support installations.

Manufacturer Resources

Product Specs

Country Of Origin:
Taiwan, Province of China
Product Diameter:
1/2"
Product Finish:
Zinc Plated
Product Length:
10 FT
Product Material:
Low Carbon Steel
Product Type:
Threaded Rod
Thread Per Inch:
13
Department:
Electrical

Minerallac 59808 – Frequently Asked Questions

1) What thread pitch is the Minerallac 59808 threaded rod, and will standard 1/2 inch nuts thread onto it?
It's 1/2 inch diameter with 13 threads per inch, which is standard 1/2-13 UNC coarse thread. Any standard coarse-thread 1/2 inch hex nut, coupling nut, rod coupler, or strut nut will run onto it. If your fittings are 1/2-20 fine thread, they will not fit.
2) Is zinc plated threaded rod OK for outdoor or wet locations?
Zinc plating on carbon steel is a mild corrosion coating built for dry indoor use, which is where most hanger rod for conduit, strut, ductwork and pipe lives. For exterior, wash-down, coastal, pool rooms, or corrosive process areas, go to hot-dip galvanized or stainless rod instead. The 59808 is zinc plated low carbon steel.
3) Will this work with 1/2 inch strut channel nuts and conduit hangers?
It will. Strut channel spring nuts, beam clamps, rod couplings, and conduit or pipe hangers sized 1/2 inch are cut 1/2-13, the same coarse thread on this rod. Diameter and pitch are the only two things that have to match, and both line up.
4) Can I cut this 10 foot threaded rod down to length on site?
Yes. It's low carbon steel, so a portable band saw, chop saw with an abrasive wheel, or even a hacksaw will get through it. Ten feet of continuous thread is meant to be cut to drop length. Chase the cut end with a nut or file the burr so the nut starts clean, and touch up the bare steel if the rod is going anywhere damp, since the zinc plating is gone at the cut.
5) Is the Minerallac 59808 threaded rod continuously threaded the whole 10 feet?
Yes, it's all-thread: 1/2-13 thread runs the full 10 foot length, so you can cut drops anywhere along the stick and still have thread at both ends. That's the difference between this and a partially threaded rod or a bolt.
6) What do I need to order with threaded rod to actually hang something?
The rod is bare stock, nothing else in the box. You'll need an anchoring point at the top (wedge anchor with a threaded rod hanger, beam clamp, or concrete insert), nuts and washers at each connection, and whatever supports the load at the bottom (conduit clamp, pipe hanger, strut). All of it in 1/2 inch to match the 1/2-13 thread.
7) Where is Minerallac threaded rod made?
The 59808 rod is manufactured in Taiwan. Useful to know up front if you're on a job with domestic-sourcing or Buy America requirements, since this one won't satisfy them.
How fast can I get the Minerallac 59808 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Minerallac 59808 come with a warranty?
Absolutely. The Minerallac 59808 is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Minerallac 59808?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Minerallac 59808 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!