You may also like
"
Minerallac 67511 Nitrile Palm Coated Work Glove, Large
The Minerallac 67511 Nitrile Palm Coated Work Glove is built for electricians, installers, and tradespeople who need reliable hand protection without sacrificing dexterity on the job. Sized Large, this glove features a nitrile coating applied across the palm for enhanced grip and abrasion resistance during daily handling of conduit, fittings, tools, and hardware. Minerallac designs this glove as a practical, everyday work solution for professionals who move between rough material handling and detail-oriented electrical tasks on the same job site.
Key Features
- Size: Large fit for comfortable, secure coverage during extended wear.
- Nitrile Palm Coating: Provides a durable, grip-enhancing barrier across the palm and fingers, the high-contact zones most exposed to wear during material handling and tool use.
- Work Glove Construction: Designed as a general-purpose protective glove for electrical, construction, and industrial trade work where grip and hand protection are priorities.
- Everyday Jobsite Durability: The palm coating is intended to stand up to repeated handling of conduit, fittings, fasteners, and tools without excessive wear.
- Practical Fit: A Large sizing option allows crews to standardize glove selection for workers who need extra room through the hand and fingers.
Technical Specifications
- Size: Large
- Palm Material: Nitrile Coating
- Refer to manufacturer documentation for complete technical specifications.
Typical Applications
- Electrical Installation and Maintenance Work
- Conduit and Fitting Handling
- General Construction and Jobsite Tasks
- Material Handling Requiring Improved Grip
- Daily Wear for Electrical Contractors and Installers
Why Minerallac?
Minerallac supplies practical, job-ready hardware and accessories for electrical and construction professionals, and the 67511 Nitrile Palm Coated Work Glove continues that approach with a straightforward, grip-focused design sized for a comfortable Large fit. Choosing a Minerallac glove means outfitting your crew with dependable, easy-to-source hand protection built for the realities of daily electrical and trade work. Stock up on Minerallac gloves and other jobsite essentials at ZenSupply for reliable protection you can count on shift after shift.
"Manufacturer Resources
Product Specs
- list_batch:
- MIN-20260924
- Product Type:
- Work Gloves
- Department:
- Electrical
- Product Subgroup:
- PPE & Safety
- Product Material:
- Nitrile
- Product Group:
- Safety & PPE
- Product Color:
- Navy Blue With Gray Palm Coating
Minerallac 67511 – Frequently Asked Questions
1) What size is the Minerallac 67511 glove, and is it the only size?
Model 67511 is the Large. It is a single-size part number, so ordering 67511 always gets you Large. If you are buying for a crew with mixed hand sizes, you will need separate part numbers for the other sizes rather than specifying a size option against this one.
2) Is the Minerallac 67511 nitrile palm glove rated for electrical work on live circuits?
No. The 67511 is a general-purpose grip and abrasion glove for electrical installation, conduit and fitting handling, and jobsite material handling. It is not an insulating or rubber lineman's glove and carries no electrical protection rating. For live work you need Class-rated rubber insulating gloves with leather protectors, not a coated knit glove.
3) I need a cut-resistant glove for handling cut conduit and sheet metal - is this the right one?
The 67511 is built for grip and palm abrasion, not cut resistance, and no cut level is assigned to it. If sharp edges or metal stock are the hazard, go to a cut-rated glove instead: the Milwaukee 48-22-8933 dipped work glove is Cut Level 3. Keep the nitrile palm glove for general handling and tool work.
4) What is the difference between the Minerallac 67511 nitrile palm coated glove and the Milwaukee 48-22-8933 work glove?
The Minerallac 67511 is a general-purpose work glove with a nitrile coating applied across the palm and fingers for grip and abrasion resistance, sized Large. The Milwaukee 48-22-8933 is a dipped work glove rated Cut Level 3. If the task involves handling sheet metal, strut ends, or cut-prone material, the cut-rated Milwaukee is the one to spec; for routine conduit, fitting, fastener, and tool handling where grip and dexterity matter, the 67511 covers it.
5) Will nitrile palm gloves hold up to repeated handling of conduit, strut and fasteners?
That is what the 67511 is built around. Nitrile is the coating of choice for abrasion and oily-grip work, and here it covers the palm and fingers, the zones that wear out first when you are pulling conduit, setting fittings and working with hand tools all shift. The uncoated back wears faster than the palm, so expect the shell, not the coating, to be the failure point.
6) Can the Milwaukee 48-22-8933 be used in place of the Minerallac 67511 for everyday conduit work?
Yes, as an upgrade rather than a like-for-like swap. Both are coated work gloves suited to jobsite material handling, but the Milwaukee 48-22-8933 adds a Cut Level 3 rating, while the Minerallac 67511 is a nitrile palm coated glove in navy blue with a gray palm coating, sized Large. Crews standardizing on one glove across mixed tasks often choose the cut-rated option; crews wanting a straightforward grip glove for conduit, fittings, and fasteners stay with the 67511.
7) What color is the Minerallac 67511 glove? I need to tell crew sizes apart on site.
Navy blue shell with a gray palm coating. Since 67511 is the Large only, the color does not distinguish size within the Minerallac line, so if you color-code by size you will need to label bins or boxes rather than rely on the glove itself.
8) Where is the Minerallac 67511 work glove made?
Country of origin is China. If your project carries a domestic-sourcing requirement on consumables, flag that before you standardize a crew on this part number.
How fast can I get the Minerallac 67511 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Minerallac 67511 come with a warranty?
Absolutely. The Minerallac 67511 is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Minerallac 67511?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Minerallac 67511 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.