You may also like
Minerallac 140 Jiffy Clip One-Hole Conduit Strap, 1/2" Rigid/IMC, Pre-Galvanized
Model: MIN-140
Minerallac 140 Jiffy Clip One-Hole Conduit Strap, 1/2" Rigid/IMC, Pre-Galvanized SteelThe Minerallac 140 Jiffy Clip is a one-hole snap-on strap engineered for fast, tool-minimal support of 1/2" Rigid...
Minerallac
$0.38
"
Minerallac Pre-Galvanized Steel Two-Hole Conduit Strap for Rigid/IMC
The Minerallac Two-Hole Conduit Strap is a pre-galvanized steel mounting strap engineered to secure Rigid or IMC conduit runs to walls, studs, and structural framing. Available in trade sizes from 1" through 1-1/2", this two-hole strap design distributes fastener load evenly across the conduit for a secure, vibration-resistant hold, giving electrical contractors a dependable, code-compliant way to anchor conduit at consistent intervals along any run. The pre-galvanized steel construction provides corrosion resistance suitable for the demands of commercial, industrial, and residential electrical installations, making this Minerallac strap a practical, job-ready solution for conduit support wherever Rigid or IMC conduit needs to be fastened to a structure.
Key Features
- Trade Size Range: Available in 1", 1-1/4", and 1-1/2" sizes to fit Rigid/IMC conduit for a precise, secure fit on a variety of run diameters.
- Durable Construction: Pre-galvanized steel stamped construction resists corrosion and stands up to demanding jobsite conditions across every size in the range.
- Two-Hole Design: Dual mounting holes distribute fastener load across the strap for a stable, reliable hold along conduit runs, reducing stress on any single fastening point.
- Conduit Compatibility: Designed specifically for Rigid and IMC conduit systems, ensuring proper fit and support regardless of the selected trade size.
- Finish: Pre-galvanized steel finish protects against rust and environmental wear over the life of the installation, whether indoors or in less-protected framing cavities.
- Stamped Construction: Stamped steel build delivers consistent dimensional accuracy and repeatable performance across multiple conduit support points on a single run.
- Professional-Grade Reliability: Sized and constructed for consistent, repeatable performance, making it a go-to choice for electricians standardizing on one strap family across a project.
Technical Specifications
- Product Subgroup: Cable Support Systems
- Product Size: 1", 1-1/4", 1-1/2"
- Number of Holes: 2
- Country of Origin: USA
- Construction: Stamped
Typical Applications
- Commercial and Industrial Conduit Support
- Rigid and IMC Conduit Runs Along Walls and Framing
- New Construction Electrical Rough-In
- Electrical Renovation and Retrofit Projects
- General Conduit Anchoring and Mounting Across Multiple Trade Sizes
Why Minerallac?
Minerallac builds conduit support hardware, like this Two-Hole Strap family, with pre-galvanized, stamped steel construction that delivers dependable corrosion resistance and long-term durability on the jobsite. Offering precise Rigid/IMC sizing across 1", 1-1/4", and 1-1/2" options with a consistent two-hole mounting design, Minerallac gives electrical contractors a straightforward, reliable way to secure conduit runs of varying diameters, helping ensure a professional, code-compliant installation every time. Standardizing on the Minerallac strap family also simplifies stocking and ordering for contractors managing multiple conduit sizes on the same job.
"Manufacturer Resources
Product Specs
- Product Type:
- Conduit Strap
- Product Finish:
- Pre-Galvanized
- Configuration:
- Two-Hole
- Department:
- Electrical
- Product Subgroup:
- Hangers, Straps & Supports
- list_batch:
- MIN-20260928
- Product Material:
- Galvanized Steel
- Installation Category:
- Steel
- Number of Holes:
- 2
- Country of Origin:
- United States
- Construction:
- Stamped
- Product Group:
- Hangers, Supports & Fasteners
- Product Color:
- Silver
Minerallac MIN260 – Frequently Asked Questions
1) What conduit sizes does the Minerallac two-hole conduit strap come in?
Four trade sizes are sold: 1/2 inch (part 240), 1 inch (260), 1-1/4 inch (270), and 1-1/2 inch (280). Sizing is by conduit trade size, so a 1-1/4 inch strap goes on 1-1/4 inch conduit, not on a 1-1/4 inch outside diameter.
2) Will a Minerallac two-hole strap work on EMT, or is it only for rigid conduit?
These straps are sized for Rigid and IMC conduit. Rigid/IMC and EMT of the same trade size do not share the same outside diameter, so an EMT run needs a strap marked for EMT instead. Using the Rigid/IMC strap on EMT leaves the pipe loose in the saddle.
3) Do I need a two-hole strap or will a one-hole strap do for my conduit run?
A two-hole strap has a mounting hole on each side of the conduit, so fastener load is split and the pipe resists twisting and vibration better than a single-hole strap. That matters on larger rigid and IMC runs, exposed industrial work, and anywhere the conduit gets bumped or vibrates. One-hole straps are quicker to install and fine on small light runs. This Minerallac strap is the two-hole configuration.
4) Are fasteners included with the Minerallac two-hole conduit strap?
No. The strap is the stamped steel saddle only, with two mounting holes. You supply the screws or anchors to suit the substrate, wood screws into studs, self-drilling screws into metal framing, or masonry anchors into concrete and block.
5) Is a pre-galvanized steel conduit strap OK outdoors or in a wet area?
Pre-galvanized steel gives corrosion resistance for indoor commercial, industrial, and residential work, including less protected framing cavities. It is not a hot-dip or stainless finish, so for sustained outdoor exposure, washdown areas, or corrosive industrial atmospheres, specify a hot-dip galvanized or stainless strap instead.
6) Are Minerallac conduit straps made in the USA for a Buy American job?
Country of origin on the Minerallac two-hole conduit strap is the United States. For a federally funded project with Buy American or BABA requirements, that is the origin declaration to record against these part numbers.
7) Can I use the same strap family across all the conduit sizes on my job?
Yes, the Minerallac two-hole strap runs from 1/2 inch through 1-1/2 inch in the same pre-galvanized stamped steel design, so mounting hole layout and appearance stay consistent from the smallest to the largest run. That keeps stocking simple on multi-size rough-ins and keeps exposed work looking uniform.
How fast can I get the Minerallac MIN260 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Minerallac MIN260 come with a warranty?
Absolutely. The Minerallac MIN260 is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Minerallac MIN260?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Minerallac MIN260 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.