Greenlee 52061973 MOBILE BENDI...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$6,773.47
$6,723.47
Greenlee 52061973 MOBILE BENDING TABLE

Greenlee 52061973 MOBILE BENDING TABLE

(No reviews yet) Write a Review

Model: 52061973
Selected Model is

In Stock (leaves warehouse same day if ordered before 3pm ET)

$6,773.47
$6,723.47
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like
MOBILE BENDING TABLE

  • Features

    • Locking swivel wheels for maneuverability Fork pockets to conveniently move the unit with a fork truck Ram positioner to ease the set up of the ram to accommodate different size shoes Steel pegs with hitch pins for storage of shoes and saddles Carriage assembly to mount the 881 Bender unit directly to the MBT Vice-chain to hold conduit securely for accurate bends, prevents conduit from twisting or turning during bend Pump basket holds the hydraulic pump for the 881 bender unit


52061973 - spec sheet

Manufacturer Resources

Spec Sheet

Product Specs

Application:
Mobile Table
Bending Angle:
0 deg to 90 deg
Capacity:
881 Bender(2-1/2" to 4" Rigid,IMC, & EMT conduits)
Country Of Origin:
US
Overall Length:
67" (1.7m)
Packaged Weight:
384
Product Height:
39 IN
Product Length:
80 IN
Product Material:
Steel
Product Type:
Mobile Bending Table
Product Width:
34 IN
Volume:
384 LB
Department:
Electrical
Product Subgroup:
Tools & Testing

Greenlee 52061973 – Frequently Asked Questions

1) Which Greenlee bender does the 52061973 mobile bending table hold?
The 52061973 mobile bending table is built around the Greenlee 881 bender unit. It has a carriage assembly that mounts the 881 head directly to the table, plus a pump basket that holds the hydraulic pump for that bender. The bender itself is a separate purchase, so you need the 881 unit and its pump to put the table to work.
2) What conduit sizes can I bend on the Greenlee mobile bending table setup?
With the 881 bender mounted, the setup handles 2-1/2 inch through 4 inch rigid, IMC and EMT conduit, bending from 0 to 90 degrees. Anything smaller than 2-1/2 inch is outside the 881's range, so a smaller hydraulic or mechanical bender is the right tool for that work.
3) Can one electrician move the Greenlee mobile bending table around a jobsite?
It rolls on locking swivel wheels, so a loaded 384 lb table can be repositioned by hand on a flat, clear slab. For moving between floors or across rough ground, use the fork pockets built into the frame and pick it up with a fork truck. Lock the swivel casters before you bend so the table does not walk under load.
4) Does the Greenlee bending table keep conduit from twisting during a bend?
Yes, that is what the vice-chain is for. It clamps the conduit down to the table so the pipe cannot twist or roll while the ram works, which is how you keep multiple bends in the same plane on a run. Without a chain hold-down, large rigid pipe will turn on you and throw the bend out of alignment.
5) How much space do I need on the jobsite floor for the Greenlee 52061973 bending table?
Footprint is 80 inches long by 34 inches wide, standing 39 inches high, with a 67 inch (1.7 m) overall length figure on the table itself. Plan for clear runout past both ends for the conduit you are feeding through, not just the 80 inch table length.
6) Where do the shoes and saddles get stored on the Greenlee 52061973?
Steel pegs with hitch pins are built into the table for hanging the bending shoes and saddles, so the full set of dies for 2-1/2 through 4 inch stays on the unit instead of loose in a gang box. The ram positioner then lets you slide the ram to line up with whichever shoe size you have loaded.
7) Is the Greenlee mobile bending table rigid enough for repeated rigid conduit bending?
The table is steel construction throughout and weighs 384 lb, which is what gives it the mass to stay put while the 881 ram pushes 4 inch rigid. It is made in the US.
8) What is the Greenlee part number for the mobile bending table?
Order it as Greenlee 52061973, a mobile bending table for the 881 bender. It ships as a single model with no size or finish options to specify.
How fast can I get the Greenlee 52061973 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Greenlee 52061973 come with a warranty?
Absolutely. The Greenlee 52061973 is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Greenlee 52061973?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Greenlee 52061973 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!