Mulberry 11401T07 Powder Coate...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$2.12
Mulberry 11401T07 Powder Coated Steel Finished Device Cover, 4-Inch x 4-Inch x 1/2-Inch

Mulberry 11401T07 Powder Coated Steel Finished Device Cover, 4-Inch x 4-Inch x 1/2-Inch

(No reviews yet) Write a Review

Model: 11401

In Stock (leaves warehouse same day if ordered before 3pm ET)

$2.12
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like

Mulberry 11401T07 Powder Coated Steel Finished Device Cover, 4-Inch x 4-Inch x 1/2-Inch

The Mulberry 11401T07 Powder Coated Steel Finished Device Cover is a 4-Inch x 4-Inch x 1/2-Inch cover built to close out standard 4-inch square electrical boxes with a clean, finished appearance. This finished cover family is available with a range of device openings, from a blank finished cover to configurations for a toggle switch, duplex receptacle, single receptacle, GFCI receptacle, combination toggle/GFCI or toggle/duplex layouts, a 1.620-Inch dia. 20A twist-lock receptacle, dual toggle or dual receptacle layouts, a 2.125-Inch dia. range/dryer receptacle, and a 2.480-Inch dia. power outlet, so electricians can match the cover to the device installed in the box. Every option shares the same powder coated steel construction and raised 1/2-Inch profile, giving the cover the corrosion resistance and wiring clearance needed for everyday commercial and residential electrical work.

Key Features

  • Trade Size: Sized 4-Inch x 4-Inch x 1/2-Inch to fit standard 4-inch square electrical boxes.
  • Durable Construction: Powder coated steel body resists corrosion, chipping, and everyday job site wear for long service life.
  • Selectable Device Opening: Offered in 15 configurations, including blank, toggle, duplex, single receptacle, GFCI receptacle, combination toggle/GFCI and toggle/duplex, 1.620-Inch dia. 20A TL receptacle, dual toggle or dual receptacle, 2.125-Inch dia. range/dryer receptacle, and 2.480-Inch dia. power outlet openings.
  • Raised 1/2-Inch Profile: The extra depth accommodates devices and wiring inside the box without crowding connections.
  • Powder Coated Finish: A tough, factory-applied coating helps protect the steel substrate from scratches and moisture exposure over time.
  • Steel Substrate: A solid steel base gives the cover the rigidity needed to stay flat and properly seated over the box opening.
  • 4-Inch Square Fit: Matches the footprint of common 4-inch square boxes used throughout residential and commercial wiring systems.

Technical Specifications

  • Refer to manufacturer documentation for complete technical specifications.

Typical Applications

  • Commercial and Residential Electrical Installations
  • 4-Inch Square Junction and Device Box Closures
  • Toggle Switch, Receptacle, and GFCI Device Installations
  • Range, Dryer, and Power Outlet Circuit Closures
  • Renovation and New Construction Wiring Projects
  • Maintenance and Service Work on Existing Box Installations

Why Mulberry?

Mulberry builds the 11401T07 finished device cover from powder coated steel, giving electricians and contractors a rugged, corrosion-resistant option for closing out 4-inch square boxes across a wide range of device configurations. The powder coated surface is engineered to stand up to daily job site handling while keeping finished installations looking clean and professional, and the range of selectable device openings lets one cover family serve toggle, receptacle, GFCI, and power outlet applications alike. For electrical professionals who need a reliable, no-frills finished cover sized to fit standard 4-inch square boxes, the Mulberry 11401T07 offers a straightforward, well-built solution backed by solid steel construction and a protective powder coated finish.

Manufacturer Resources

Product Specs

Product Group:
Wiring Devices
Department:
Electrical
Product Type:
Box Cover
Product Material:
Steel
Product Finish:
Powder-Coated
Product Size:
4-Inch x 4-Inch x 1/2-Inch

Mulberry 11401 – Frequently Asked Questions

1) Which Mulberry finished cover do I order for a GFCI receptacle in a 4-inch square box?
For a single GFCI, order the 11432. If the box holds two GFCIs, use the 11433. Mixed openings are also available: 11435 covers one duplex plus one GFCI, and 11436 covers a toggle switch plus a GFCI. All share the same powder coated steel body and 1/2-inch raised profile.
2) What Mulberry cover works for a 4-inch square box feeding a range or dryer receptacle?
The 11422 has a 2.125 inch diameter round opening for a range/dryer receptacle. For a larger power outlet body, the 11423 opens 2.480 inches. If you are closing a 20A twist-lock receptacle instead, the 11421 has a 1.620 inch diameter opening. Match the opening to the receptacle's mounting boss diameter before ordering.
3) Can I get a Mulberry 4-inch square cover with two devices in one opening?
Yes, several two-device layouts are offered: 11410 for two toggle switches, 11411 for two duplex receptacles, 11412 for two single receptacles, 11413 for toggle plus duplex, and 11414 for toggle plus single receptacle. These let you close out a 4-inch square box wired with a two-gang device pair without adding a plaster ring and separate wall plate.
4) Is a powder coated steel box cover suitable for a damp or unfinished area like a garage or mechanical room?
The powder coated steel construction resists corrosion, chipping, and job site wear, which suits exposed surface-mounted boxes in garages, basements, and mechanical spaces where a plastic or bare stamped cover would scuff or rust. It is a finished device cover, not a weatherproof in-use cover, so for wet locations outdoors you need a gasketed weatherproof cover rated for that use.
5) Do I still need a separate wall plate with this Mulberry cover?
No. This is a finished device cover, so the device opening is cut into the cover itself and the cover becomes the visible face over the 4-inch square box. That is the difference from a plaster ring, which mounts to the box and still requires a standard wall plate over the device. Blank through toggle, duplex, single, GFCI, twist-lock, and range/dryer openings are all offered in the same family.
6) I just need to close off an unused 4-inch square junction box. Is there a blank version?
Yes, the 11401T07 finished cover family includes a blank configuration with no device opening, for capping a junction box where no device is installed. It uses the same powder coated steel body and 1/2-inch raised profile as the device versions, so the appearance matches other covers on the same job.
7) Why choose a raised 1/2-inch cover instead of a flat one over a crowded 4-inch square box?
The extra 1/2 inch of depth gives the device and conductors room inside the box so connections are not compressed when the cover is drawn down. On a box packed with a GFCI body or a range receptacle plus splices, that clearance is what lets the cover seat flat against the box. A flat cover offers no added volume at all.
8) For a maintenance crew standardizing 4-inch square covers across a building, how many opening configurations does the Mulberry 11401 family cover?
Fifteen orderable device openings are available under the same 4 x 4 x 1/2 inch powder coated steel cover, running from blank and single toggle (11401) through duplex (11402), single receptacle (11403), GFCI (11432), and the round openings for twist-lock, range/dryer, and power outlet. One cover family and one finish handles switch, receptacle, GFCI, and appliance circuits, which keeps a stockroom to a single line item type with varying openings.
How fast can I get the Mulberry 11401 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Mulberry 11401 come with a warranty?
Absolutely. The Mulberry 11401 is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Mulberry 11401?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Mulberry 11401 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!