You may also like
Mulberry 40671 Polyethylene Foam Insulating Gasket for 1-Gang Toggle Switch
Model: MUL-40671
Mulberry 40671 Polyethylene Foam Insulating Gasket for 1-Gang Toggle SwitchThe Mulberry 40671 is a polyethylene foam insulating gasket engineered for use with 1-Gang toggle switches, sitting between...
Mulberry
$0.39
Mulberry 41020 Gas Burner Red Toggle Switch Plate, 1-Gang
The Mulberry 41020 is part of the Mulberry 4102 Series of engraved, silk-screened toggle switch plates, offered in two labeled models — 41020 (Gas Burner) and 41021 — so facilities can match the correct designation to the correct emergency shutoff switch. This 1-Gang, flush-mount, standard-size plate is finished in a bold red field with silk-screened white lettering, sized for GFCI and isolated-ground toggle switch box configurations. The Model 41020 version identifies a Gas Burner shutoff switch, giving facility staff, maintenance crews, and first responders an immediate, unmistakable visual cue at the point of control in boiler rooms, mechanical rooms, and other utility spaces.
Key Features
- Configuration: 1-Gang toggle switch plate sized for a single-switch device opening.
- Mount Style: Flush mount, standard size for a clean, low-profile fit directly over a standard toggle switch box.
- Color: Red background for high-visibility identification of a critical shutoff switch location.
- Lettering: Silk-screened white letters that stay legible through repeated cleaning and years of service, unlike an adhesive label.
- Series: Part of the Mulberry 4102 Series of labeled toggle switch plates, available in Model 41020 (Gas Burner) and Model 41021.
- Box Compatibility: Sized for GFCI and isolated-ground toggle switch box installations.
- Application: Model 41020 provides point-of-use identification of a Gas Burner emergency shutoff switch, so the correct switch is never in question during an emergency or routine maintenance.
Technical Specifications
- Product Type: Wallplate
Typical Applications
- Gas Burner Emergency Shutoff Switch Identification
- Boiler and Mechanical Room Signage
- Commercial and Industrial Facility Switch Labeling
- GFCI and Isolated-Ground Switch Box Installations
- Renovation and New Construction Electrical Rooms
- Facility Maintenance and First-Responder Wayfinding
Why Mulberry?
Mulberry's 4102 Series pairs a durable red finish with permanent silk-screened white lettering so a Gas Burner shutoff stays clearly marked for the life of the installation, rather than relying on an adhesive label that can fade or peel. Offering both the 41020 and 41021 models lets electrical contractors, property managers, and facility teams select the correctly labeled 1-Gang toggle switch plate for each GFCI or isolated-ground switch location. Choosing a dedicated, purpose-labeled plate over a blank switch plate with an aftermarket sticker helps keep emergency shutoff points consistent, professional, and easy to spot across a facility.
Manufacturer Resources
Mulberry Full Line Catalog
Product Specs
- Department:
- Electrical
- Product Group:
- Wiring Devices
- Product Type:
- Toggle Wallplate
- Product Color:
- Red
- Series:
- 4102 Series
- Product Subgroup:
- Wallplates
Mulberry 41020 – Frequently Asked Questions
1) What is the difference between Mulberry 41020 and 41021 switch plates?
Both are red toggle switch plates from Mulberry's 4102 Series with silk-screened white lettering. The 41020 is the 1-gang version labeled Gas Burner; the 41021 is the 2-gang version. Pick by how many switch positions the box has and which designation you need at that location.
2) Will the Mulberry 41020 red Gas Burner plate fit a standard single-gang toggle switch box?
Yes. The 41020 is a 1-gang, flush-mount, standard-size toggle switch plate with a single toggle opening, so it drops onto a standard single-device switch box. It is sized for GFCI and isolated-ground toggle switch box configurations as well.
3) Is there a plain toggle switch plate I can use where no Gas Burner label is needed?
Yes. The Mulberry 41020 carries silk-screened white lettering on a red field specifically to mark a Gas Burner shutoff, so it is the wrong choice for an ordinary lighting switch. For an unlabeled single toggle opening, the Cantex 5133330 is a PVC single toggle switch wallplate, and the Leviton 80704 is a thermoplastic nylon commercial grade 1-gang wallplate in gray. Both cover a standard switch device without any printed designation.
4) Is the Gas Burner lettering on the Mulberry 41020 printed or a stick-on label?
It is silk-screened white lettering on the red plate, not an adhesive label. That is the reason facilities use it over a blank plate with a sticker: the marking does not peel or fade off with cleaning, so a boiler room shutoff stays identified for the life of the install.
5) I need a red switch plate for a boiler room gas shutoff. Will a plain plate work instead?
A blank plate will cover the device but gives no identification. The Mulberry 41020 puts a red field with Gas Burner in white at the point of control, which is what gets maintenance crews and first responders to the right switch in an emergency. If you only need a cover with no marking, a blank like the Pass & Seymour WPB Series brushed aluminum blank wallplate or the Leviton PJ23-E 2-gang blank does that job instead.
6) Can I standardize all my mechanical room shutoff switches on the Mulberry 4102 Series?
That is what the series is for. Ordering the labeled plates rather than blanks with aftermarket stickers keeps every emergency shutoff point marked the same way across a facility. The 4102 Series gives you the 41020 Gas Burner plate in 1-gang and the 41021 in 2-gang, so you can match the plate to the device count at each location.
7) My mechanical room switch is a Decora style rocker, not a toggle - what plate fits that?
The Mulberry 41020 is cut for a standard toggle switch, so a Decora rocker will not seat in it. For a single-gang Decora device, the Leviton 16252 is a Decora single-gang device wallplate, sold in a pack of 100. The Eaton 7729V-SP is a decorator-style cover in a triple-gang configuration if three decorator devices share the box.
8) I need to cover a two-switch opening in the boiler room - does the Mulberry 4102 Series go to 2-gang?
Yes. The Mulberry 4102 Series includes a 1-gang plate, part number 41020, and a 2-gang plate, part number 41021. If the second opening does not need a printed designation, unlabeled 2-gang options include the Pass & Seymour TP703LA TradeMaster nylon wall plate in light almond and the Leviton PJ2-E thermoplastic nylon midway plate in commercial grade.
9) Can I use a blank wallplate instead of the Mulberry 41020?
Only if there is no switch behind it. The Mulberry 41020 is a 1-gang toggle switch plate with a device opening for a single toggle. Blank plates such as the Pass & Seymour WPB Series in brushed aluminum and the Leviton PJ23-E 2-gang thermoplastic nylon midway box mount plate have no device cutout and are meant to close off an unused box, so they cannot be used over a Gas Burner shutoff switch.
10) What if the plate needs to sit slightly oversized to hide a rough drywall cut?
The Mulberry 41020 is a standard-size flush-mount plate, so it covers only the standard footprint around the box. For more coverage, the Bryant PJ Series is an M-size wallplate for wiring devices, and the Leviton PJ2-E is a midway-size 2-gang thermoplastic nylon plate in commercial grade. Neither carries the Gas Burner designation, so use them where identification lettering is not required.
11) What color is the Mulberry 4102 Series switch plate?
Red, with white lettering screened on. The red field is deliberate: it flags a critical shutoff location so it reads differently from the white or almond plates used elsewhere in a building, such as a Pass & Seymour TradeMaster light almond plate or a Leviton Decora white plate.
12) Will a combination wallplate work in place of the Mulberry 41020 red plate?
No. The Cooper Wiring Devices 2138WBOX is a 21 Series thermoset combination wallplate in white, built for two different device types in one opening, and the Bryant P8 Series 1-gang plate is cut for a duplex receptacle. The Mulberry 41020 covers a single toggle switch and carries the red field with silk-screened white Gas Burner lettering used to mark an emergency shutoff.
13) Are data or telephone jack plates an option for the same box as the Mulberry 41020?
They serve a different device entirely. The Eaton 35324W is a wallplate with a 4-conductor data/voice modular jack, Type 625B4, and the Eaton 3533-4W is a white thermoplastic surface mount telephone jack wallplate for RJ11/RJ14. The Mulberry 41020 has a toggle switch opening and red Gas Burner identification, so it is not interchangeable with either in a communications rough-in.
How fast can I get the Mulberry 41020 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Mulberry 41020 come with a warranty?
Absolutely. The Mulberry 41020 is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Mulberry 41020?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Mulberry 41020 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.