NGP Edge Intumescent Fire Seal, Gray Finish
Product Features
- NGP-Edge® Sealing System/Smoke and Draft Control Gasketing Category “G” Classified
- NGP Intumescent Materials are Formulated to Expand at 275°F up to 20 Times Their Original Thickness; Completely Sealing the Gap Around and Between Doors During a Fire
- Moisture-Resistant
- Modified Acrylic Pressure-Sensitive Adhesive Protected by Release Liner
- Provides High Initial Adhesion and Long-Term Holding Power for Permanent Mounting in Exterior or Interior Locations
- Resistant to Aging, Weathering, UV Radiation, Water, Detergent, Alcohol and the Influence of Chemicals
- End Use Temperature Range of Adhesive, Long-Term Exposure -30°F Up To 250°F
- Shelf Life of Adhesive Prior to Installation is One Year when Stored at 75°F and 50% Relative Humidity or Less
- REACH and RoHS Compliant
- 1/2" Wide x 1/16" Tall
- Sold By the Foot: 3' Minimum to 490' Reel
- Gray
Standards
-
NGP-EDGE® SEALING SYSTEM. Certified by UL to ANSI/UL10C Category ‘G’; required for Category B wood fire doors to meet positive pressure requirements complying with IBC, and NFPA 252. See individual products for maximum door size and ratings.
-
CERTIFIED by UL to CAN/ULC-S104 and ANSI/UL10B, complies with NFPA 80 and NFPA 252 for application to Wood fire doors rated up to 90 minutes.
-
POSITIVE PRESSURE - CERTIFIED by UL to ANSI/UL10C, complies with IBC, NFPA 80 and NFPA 252 for application to Wood fire doors rated up to 90 minutes.
Manufacturer Resources
Product Specs
- Category:
- Door Trim and Accessories
- Product Group:
- Door Trim and Accessories
- Product Subgroup:
- Astragals, Gaskets and Weatherstripping
- Product Type:
- Gasketing
- Subcategory:
- Gaskets & Weatherstripping
- Commercial/Residential:
- Commercial