Nibco 884 DWV P-Trap with Clea...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$314.61
Nibco 884 DWV P-Trap with Cleanout C x C x Cleanout with Plug - Cast

Nibco 884 DWV P-Trap with Cleanout C x C x Cleanout with Plug - Cast

(No reviews yet) Write a Review

Model: E560350

In Stock (leaves warehouse same day if ordered before 3pm ET)

$314.61
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like
The P-Trap features solder cups and cleanout with plug. The fitting provides a water seal, preventing unwanted gases to enter the dwelling. The cleanout provides a means of clearing potential clogs in certain portions of the drainage system. Please refer to NIBCO technical data sheets and catalogs for engineering and installation information. In addition to its inherent qualities of beauty, durability and low maintenance, copper's reusability makes it an ideal application in sustainable projects. NIBCO® copper fittings are manufactured in an ISO 9001 certified facility, and backed by a 50-year limited warranty. Because of its longstanding reputation for innovation and precision in design and manufacturing, NIBCO is the preferred brand in the industry.

  • Dezincification resistant
  • ASTM B584 Alloy C84400
  • Material and workmanship per ASME B16.23

Copper Fittings Installation Instructions

Manufacturer Resources

Product Specs

All Application(s):
DWV Drain / Waste / Vent
All Basic Material:
Bronze
Classification:
Solder DWV Traps
End Connection:
Threaded
Metal End Connection Type:
C x C
Product Group:
Fitting
Product Type:
Solder DWV Traps
System Use:
Commercial Plumbing, Residential Plumbing
Type of Trap:
with Cleanout;with Plug;P-Trap
Product Subgroup:
Trap
Department:
Plumbing
Country Of Origin:
United States

Nibco E560350 – Frequently Asked Questions

1) What pipe sizes does the Nibco 884 DWV P-trap come in?
The Nibco 884 cast bronze DWV P-trap with cleanout is made in four sizes: 1-1/4 inch (E560250), 1-1/2 inch (E560300), 2 inch (E560350) and 3 inch (E560400). Match the size to the DWV copper tube you are draining: 1-1/4 and 1-1/2 for lavatories and small fixtures, 2 inch for showers, floor drains and sink batteries, 3 inch for larger commercial drainage.
2) How does the Nibco 884 P-trap connect to the drain line, solder or thread?
Both ends are solder cups, C x C, so the trap sweats onto copper DWV tube of the matching size. The only threaded connection is the cleanout, which takes the supplied plug. Plan on a torch and solder at the inlet and outlet; there is no union or slip joint on this fitting.
3) Do I need a separate cleanout fitting downstream of this trap?
No. The 884 has the cleanout built into the trap body and ships with the plug, so you get a rodding point right at the trap for clearing clogs in that portion of the drainage system without cutting the line. Leave clearance at the plug so it can be backed out with a wrench after the trap is soldered in.
4) What is the Nibco 884 trap made of, and will it hold up in a commercial building?
It is cast bronze, ASTM B584 alloy C84400, and dezincification resistant, which is why it holds up in drainage service where a plated tubular trap would corrode through. Nibco lists it for both commercial and residential plumbing, and material and workmanship are per ASME B16.23.
5) Is a cast bronze solder P-trap the right choice, or should I use a tubular chrome trap?
A tubular trap with slip joints is fine under an exposed lavatory where you want to take it apart. The 884 is for the opposite situation: a permanent, soldered copper DWV trap for concealed or in-wall work, floor drains and commercial drainage where the joint has to be as durable as the pipe and access is through the cleanout plug rather than by disassembly. Once it is soldered in, it comes out with a torch or a saw.
6) Do I still need a trap if the fixture drain is vented?
Yes, venting and trapping do different jobs. The 884 holds a water seal in the bend that blocks sewer gas from coming back up into the building; the vent keeps that seal from being siphoned or blown out. You need both on a DWV system.
How fast can I get the Nibco E560350 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Nibco E560350 come with a warranty?
Absolutely. The Nibco E560350 is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Nibco E560350?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Nibco E560350 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!