You may also like
NON-INS FORK TERM, 18-14, 10, METAL
Manufacturer Resources
Product Specs
- Country Of Origin:
- United States (US)
- Product Subgroup:
- General Terminals
- Product Type:
- Non-Insulated Fork Terminal
- Standards:
- UL E9809
- Voltage Rating:
- 600 V
- Wire Size:
- 18-14 AWG
- Department:
- Electrical
- Product Group:
- Wire Termination
- Product Color:
- Metallic
- Product Material:
- Copper
Sta-Kon B14-10F – Frequently Asked Questions
1) What stud or screw size does the B14-10F fork terminal fit?
It is a #10 stud terminal. The fork slips over a #10 screw or stud without removing the nut all the way, which is the reason electricians pick a spade over a ring on terminal blocks and strips that get re-landed often.
2) Can I use a non-insulated fork terminal on 480V control wiring?
The B14-10F is rated 600 V, so it is fine on 480 V circuits from a rating standpoint. Because the terminal itself is bare metal with no insulating sleeve, the installer is responsible for the insulation at the joint, either heat shrink over the barrel or adequate clearance inside the enclosure.
3) Is this terminal UL listed for a commercial panel inspection?
Yes, the Sta-Kon B14-10F carries UL file E9809. That is the reference an inspector or a spec writer will want on a submittal for terminations inside a panel or control cabinet.
4) Should I use a fork terminal or a ring terminal on a terminal block?
A fork like the B14-10F slides in sideways under a loosened #10 screw, so you can land or pull a conductor without backing the screw all the way out, which saves real time on a block with dozens of points. A ring is the choice where vibration or an exposed stud makes a captive connection necessary, since a fork can slip off if the screw loosens. Both land on the same #10 hardware.
5) Do I need a special crimper for the Sta-Kon B14-10F?
It is a non-insulated copper barrel, so it takes a non-insulated crimp die, not the color-coded red/blue nest used for insulated terminals. An insulated-terminal crimper will under-form the bare barrel and leave a connection that pulls out.
6) What is the Sta-Kon part number to order for an 18-14 AWG, #10 stud fork terminal?
Order Sta-Kon B14-10F. The B14 prefix is the 18-14 AWG range and the 10F is the #10 fork tongue, bare metal finish.
7) Is the B14-10F fork terminal made in the USA?
Country of origin is the United States, which matters for Buy American or domestic-content requirements on government, healthcare and education work.
How fast can I get the Sta-Kon B14-10F delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Sta-Kon B14-10F come with a warranty?
Absolutely. The Sta-Kon B14-10F is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Sta-Kon B14-10F?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Sta-Kon B14-10F from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.