You may also like
NON-INS FORK TERM 18-14 NO6 MYLAR
Manufacturer Resources
Product Specs
- Country Of Origin:
- United States (US)
- Product Subgroup:
- General Terminals
- Product Type:
- Non-Insulated Fork Terminal
- Standards:
- UL E9809
- Wire Size:
- 18-14 AWG
- Department:
- Electrical
- Product Group:
- Wire Termination
- Product Material:
- Copper
Sta-Kon B19M – Frequently Asked Questions
1) What wire gauge does the Sta-Kon B19M fork terminal accept?
The B19M takes 18 to 14 AWG stranded or solid copper conductor. If you're terminating 12 AWG or larger, this barrel won't crimp down on it correctly and you need a larger-gauge terminal.
2) What stud size does the Sta-Kon B19M fork terminal fit?
It's sized for a No. 6 stud or screw. The fork (spade) tongue slides in under a loosened terminal screw rather than requiring you to pull the screw out, which is why electricians favor it for panel and control-wiring terminal blocks.
3) Is the Sta-Kon B19M insulated or does it need a separate sleeve?
It's a non-insulated terminal, bare copper with no plastic or nylon sleeve. If the connection needs covering for voltage separation or strain relief, add heat-shrink or a snap-on insulating sleeve over the crimped barrel.
4) Should I use a fork terminal or a ring terminal on my terminal block?
A fork terminal like the B19M slips in sideways under a partly backed-out No. 6 screw, so you can add or pull a conductor without removing the screw and losing it in a live panel. A ring terminal is captive and can't vibrate off, which is the better pick on motor, bus, or mobile-equipment studs. Use the fork where service access matters, the ring where vibration does.
5) Can I crimp the Sta-Kon B19M with ordinary pliers?
No. It's a bare copper barrel that relies on a controlled compression crimp to make a mechanically and electrically sound joint. Use the proper die-set crimp tool for 18-14 AWG non-insulated terminals; pliers deform the barrel and leave a high-resistance connection that heats under load.
6) Is the Sta-Kon B19M made in the USA?
Yes, country of origin is the United States, which matters on government and federally funded jobs carrying domestic-content requirements.
How fast can I get the Sta-Kon B19M delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Sta-Kon B19M come with a warranty?
Absolutely. The Sta-Kon B19M is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Sta-Kon B19M?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Sta-Kon B19M from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.