You may also like
NON-INS PIN TERMINALS 22-18 LG .63
Manufacturer Resources
Product Specs
- Country Of Origin:
- United States (US)
- Product Subgroup:
- General Terminals
- Product Type:
- Non-Insulated Pin Terminal
- Voltage Rating:
- 300 V
- Wire Size:
- 22-18 AWG
- Department:
- Electrical
- Product Group:
- Wire Termination
- Product Color:
- Metallic
- Product Material:
- Copper
Sta-Kon A47PT – Frequently Asked Questions
1) What wire sizes does the Sta-Kon A47PT pin terminal crimp onto?
The A47PT accepts 22 to 18 AWG stranded copper conductors. Anything heavier than 18 AWG will not seat in the barrel, and wire finer than 22 AWG won't hold a reliable crimp, so for 16 AWG and up you need a larger pin terminal in the same family.
2) What is the voltage rating on the A47PT pin terminal?
Rated 300 V. That covers standard control wiring, panel interconnects, lighting controls, and low voltage device terminations. For 600 V circuits you need a terminal rated to 600 V, so don't substitute this one into a power branch circuit termination.
3) Is the Sta-Kon A47PT insulated, and does it need a sleeve?
It's a non-insulated pin terminal, bare copper with no nylon or vinyl sleeve. If the terminal lands in a crowded enclosure or anywhere adjacent conductors could bridge, plan on heat shrink or an insulating sleeve over the barrel. Inside a screw-clamp terminal block where the barrel is captured, bare is normally how these are run.
4) Why use a pin terminal instead of a fork or ring terminal on control wire?
A pin terminal gives you a solid round post instead of a flat tongue, so it drops straight into a screw-clamp or cage-clamp terminal block without the strands splaying or getting chewed by the clamp screw. Fork and ring terminals are for binding-head screws and studs. The A47PT handles 22-18 AWG at 300 V, which is the usual range for control and signal wiring landing in terminal blocks.
5) How do I order the right Sta-Kon pin terminal part number for 18 AWG control wire?
Order by the Sta-Kon model, A47PT. That's the single part designation for the non-insulated pin terminal covering 22-18 AWG at 300 V, so there's no finish or color option to specify, the part is bare metallic copper as supplied.
6) Is the Sta-Kon A47PT made of copper or tin plated steel?
The barrel and pin are copper. That matters for crimp integrity and conductivity on fine control conductors, and it means the terminal is terminating copper to copper when used on standard building and panel wire. These are made in the United States.
How fast can I get the Sta-Kon A47PT delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Sta-Kon A47PT come with a warranty?
Absolutely. The Sta-Kon A47PT is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Sta-Kon A47PT?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Sta-Kon A47PT from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.