You may also like
NON INSUL BUTT SPLC 22-18
Manufacturer Resources
Product Specs
- Country Of Origin:
- United States (US)
- Product Subgroup:
- Splices
- Product Type:
- Non-Insulated Butt Splice
- Wire Size:
- 22-18 AWG
- Department:
- Electrical
- Product Group:
- Wire Termination
Sta-Kon 675-51104-8 – Frequently Asked Questions
1) What wire gauge does the Sta-Kon 675-51104-8 butt splice accept?
The Sta-Kon 675-51104-8 is sized for 22 to 18 AWG stranded wire. Both barrel ends take the same range, so you're splicing like gauge to like gauge within 22-18. Anything heavier, such as 16 or 14 AWG, needs a larger barrel.
2) Is this Sta-Kon splice insulated, and do I need to insulate it after crimping?
It's a non-insulated barrel, bare metal end to end. You supply the insulation yourself after crimping, normally adhesive-lined heat shrink or tape, which is why electricians pick a non-insulated splice when they want a specific shrink system or a low-profile joint. If you'd rather the insulation come on the part, order an insulated butt splice in the same 22-18 range instead.
3) Can I crimp the 675-51104-8 with regular pliers or do I need a crimp tool?
Use a crimper rated for non-insulated terminals in the 22-18 AWG range. Non-insulated barrels crimp in the uninsulated nest of the tool, not the color-coded insulated nests, and pliers will deform the barrel without forming a proper indent. A bad crimp on 22 AWG control wire is the usual cause of an intermittent circuit later.
4) Will a 22-18 AWG butt splice work for low voltage control and thermostat wiring?
That's the normal use for it. 22 and 18 AWG is where thermostat cable, alarm and access control runs, and HVAC control wiring live, and this Sta-Kon barrel covers that whole band. Line voltage branch circuits in 14 and 12 AWG are outside its range.
5) Is this butt splice made in the USA?
Yes. Country of origin on the Sta-Kon 675-51104-8 is the United States, which matters if you're buying against a Buy American or domestic-preference requirement on a government or institutional job.
6) What is the exact part number to order this Sta-Kon splice by?
Order Sta-Kon part 675-51104-8. It's a single model, a non-insulated butt splice for 22-18 AWG, with no finish or size options to pick.
How fast can I get the Sta-Kon 675-51104-8 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Sta-Kon 675-51104-8 come with a warranty?
Absolutely. The Sta-Kon 675-51104-8 is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Sta-Kon 675-51104-8?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Sta-Kon 675-51104-8 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.